• 전력전자학회논문지
• /
• 제13권1호
• /
• pp.41-45
• /
• 2008

본 논문에서는 홀센서와 같은 자극위치 센서를 사용하지 않는 Z축 선형 영구자석 동기전동기의 초기 자극위치 추정에 관한 알고리즘을 제안한다. 제안된 알고리즘은 Z축의 경우에 존재하는 중력에 의한 자체하중의 영향을 고려하고, 부하질량 변동에 따른 추정특성 변화를 회피하기 위한 방법을 제시하며, 2단계로 구성되어 있다. 1단계에서는 미리 정한 각도 간격의 시험 q축에 전류를 인가하여 구한 이동거리를 사용하여 근사적인 q축을 추정한다. 2단계에서는 1단계의 추정치를 초기치로 이용하며, 부하질량의 영향을 받지 않도록 하기 위하여 3개의 시험 q축에 인가한 전류에 따른 추력에 대응하는 값을 이용하여 자극위치를 정밀하게 추정한다. 그리고 Z축 PMLSM에 대한 실험 결과를 통하여 제안된 초기 자극위치 추정방법으로 부하질량 조건에 관계없이 정밀하게 자극위치를 추정함을 검증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.936-939
• /
• 2004

In this paper a comparison of the initial rotor position estimation methods by two type search coils for switched reluctance motor(SRM) is presented. The experimental results of the two methods show that the interior central pole search coil method has better performance than the exterior pole search coil method. The reason of the discrepancy in performance is described.

• Journal of Power Electronics
• /
• 제11권6호
• /
• pp.856-863
• /
• 2011

In this paper a novel method of the Ant Colony Optimization algorithm for rotor position estimation in Switched Reluctance Motors is presented. The data provided by the initial assumptions is one of the important aspects used to solve the problems relative to an Ant Colony algorithm. Considering the nature of a real ant colony, it was found that the ants have no primary data for deducing which is the shortest path in their initial iteration. They also do not have the ability to see the food sources at a distance. According to this point of view, a novel method is presented in which the rotor pole position relative to the corresponding stator pole in a switched reluctance motor is estimated with high accuracy using the active and inactive phase parameters. This new method gives acceptable results such as a desirable convergence together with an optimized and stable response. To the best knowledge of the authors, such an analysis has not been carried out previously.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2009년도 정기총회 및 추계학술대회 논문집
• /
• pp.96-98
• /
• 2009

This paper propose a method to detect the rotor position of IPMSM(Interior permanent magnet synchronous motor) at standstill without a position sensor. The proposed method is based on current variation caused by the magnetic saturation of stator core as rotor position. By choosing an appropriate voltage vector and applying it to phase winding, it enables the algorithm to discern between a north pole and south pole, and subsequently estimates an absolute position. This method dose not depend on the model of the motor and the motor parameter.

• 전기학회논문지
• /
• 제60권10호
• /
• pp.1915-1923
• /
• 2011

For automated guidance control of a magnetically guided-all wheel steered vehicle, it is necessary to have information about position and orientation of the vehicle, and deviations from the reference path in real time. The magnet reference system considered here consists of three magnetic sensors mounted on the vehicle and magnetic markers, which are non-equidistantly buried in the road. This paper presents an observer to estimate such position and orientation at the center of gravity of the vehicle. This algorithm is based on the simple kinematic model of vehicle and uses the data of wheel velocity, steering angle, and the discrete measurements of marker positions. Since this algorithm requires the exact values of initial states, we have also proposed an algorithm of determining the initial position and orientation from the 16 successive magnet pole data, which are given by the magnetic measurement system(MMS). The proposed algorithm is capable of continuing to estimate for the case that the magnetic sensor fail to measure up to three successive magnets. It is shown through experimental data that the proposed algorithm works well within permissible error range.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제5B권1호
• /
• pp.84-89
• /
• 2005

This paper presents a control algorithm for a large salient-pole synchronous motor fed by a Load Commutated Inverter (LCI). Many papers have been presented in the past few years on the justification, design, and application of variable-speed drive. The focus of this paper is on high torque operation and the estimation of initial rotor position. The results of simulation indicate that it is possible to produce the maximum torque and estimate the initial rotor position.

• 전력전자학회논문지
• /
• 제16권4호
• /
• pp.374-381
• /
• 2011

본 논문에서는 매입형 영구자석 동기전동기의 정지 시 위치센서 없이 회전자의 초기 위치를 추정하는 방법을 제안한다. 제안된 방법은 자기적 포화에 의한 인덕턴스 변화를 이용하여 비교적 간단히 회전자의 초기 위치를 추정한다. 최소의 전압 벡터들을 인가하여 인덕턴스의 차이에 대응한 전류를 측정하여 회전자의 위치와 극성을 정확하게 판별할 수 있다. 제한된 방법은 추가적인 하드웨어가 필요하지 않으며, 전동기 파라미터에 영향을 받지 않고 전압벡터를 최소로 인가하여 측정할 수 있다는 장점을 가진다. 실험을 통해 제안된 방법의 타당성을 검증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.196-200
• /
• 2004

This paper presents a new method of detecting rotor position in Toroidal Switched Reluctance Motor(TSRM). In this paper, low cost and robust characteristics of rotor position detection method are focused in order to compensate for disadvantage of general sensors. Search coils wound through the hole of the stator poles are used for detection of the rotor position in TSRM. Rotor position detection is achieved through electromotive force patterns induced by time-varying flux linkage in the search coils and then adequate phase is excited for drive. The initial rotor position estimation method is also described. The validity of the method is verified by experimental results.