• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.491-498
• /
• 2002

Dredged and reclaimed soft clays form slurry state which is very high water content and very low shear strength, experience large self-weight consolidation, nonlinear compressibility and permeability phenomenon would take place. In this case, a material functions which represent variety effective stress-void ratio-permeability relation (especially very low effective stress), are should be determined to predict nonlinear finite strain consolidation phenomenon forehand In this study, large slurry consolidometer with a 380mm diameter and a 1400mm height which is able to consolidation and permeability test, was developed to determine material function of very soft clay with a 500% initial water content clay, self-weight consolidation and low stress level consolidation (1Kpa, 3Kpa, 6Kpa, 12Kpa) was conducted and after each consolidation step permeability test also conducted. after final consolidation step, a constant rate of strain consolidation was conducted with undisturbed sample obtained from the large consolidometer. On the above result, material function was determined and laboratory test was modelled to evaluate its validity, numerical analysis on th field was compared to other method.

• Geosystem Engineering
• /
• 제21권6호
• /
• pp.344-351
• /
• 2018

It is reported that the flooding rate in low permeability sandstones is low and the oil recovery is hard to increase after water breakthrough. Understanding characteristics of waterflood is hence important for the recovery improvement. In this work, flooding tests on low permeability sandstones were conducted. The corresponding flooding characteristics were investigated by means of CT scanning and Nuclear Magnetic Resonance. Effects of irreducible water and different rates were also discussed in detail. Experimental results reveal a piston-like displacement at a low rate in low permeability samples. The saturation profile is steep and almost vertical to the forward direction. The results at a low rate confirm that once water broke through, increasing the flooding rate or flooding time can hardly reduce the remaining oil inside the sample. It is probably due to the high pore-throat ratio proven by rate-controlled mercury. Results also confirm that the presence of initial water enhanced sweep efficiency substantially. On one hand, because water had previously occupied the small pores, the subsequent oil can only invade relatively large pores and became more movable. On the other hand, stable collars can not form due to the steep front, which may suppress the snap-off.

• Journal of Microbiology and Biotechnology
• /
• 제32권1호
• /
• pp.37-45
• /
• 2022

The fungal cell wall and membrane are the principal targets of antifungals. Herein, we report that myricetin exerts antifungal activity against Candida albicans by damaging the cell wall integrity and notably enhancing the membrane permeability. In the presence of sorbitol, an osmotic protectant, the minimum inhibitory concentration (MIC) of myricetin against C. albicans increased from 20 to 40 and 80 ㎍/ml in 24 and 72 h, respectively, demonstrating that myricetin disturbs the cell wall integrity of C. albicans. Fluorescence microscopic images showed the presence of propidium iodide-stained C. albicans cells, indicating the myricetin-induced initial damage of the cell membrane. The effects of myricetin on the membrane permeability of C. albicans cells were assessed using crystal violet-uptake and intracellular material-leakage assays. The percentage uptakes of crystal violet for myricetin-treated C. albicans cells at 1×, 2×, and 4× the MIC of myricetin were 36.5, 60.6, and 79.4%, respectively, while those for DMSO-treated C. albicans cells were 28.2, 28.9, and 29.7%, respectively. Additionally, myricetin-treated C. albicans cells showed notable DNA and protein leakage, compared with the DMSO-treated controls. Furthermore, treatment of C. albicans cells with 1× the MIC of myricetin showed a 17.2 and 28.0% reduction in the binding of the lipophilic probes diphenylhexatriene and Nile red, respectively, indicating that myricetin alters the lipid components or order in the C. albicans cell membrane, leading to increased membrane permeability. Therefore, these data will provide insights into the pharmacological worth of myricetin as a prospective antifungal for treating C. albicans infections.

• 한국재료학회지
• /
• 제13권6호
• /
• pp.365-368
• /
• 2003

Small amounts of additives such as mol % 0.13 NiO and mol % 0.01 $CaCO_3$were added to Cu-Zn-Mg ferrites. Basic composition of the Cu-Zn-Mg ferrites was $Cu_{Cu}$X/$Fe_{0.054}$ /$Zn_{0.486}$$Mg_{0.407}$ $Fe_{1.946}$ $O_4$(group A) and $Cu_{0.263}$$Fe_{0.027}$ $Zn_{0.503}$ $Mg_{0.262}$ $Fe_{1.973}$ $O_4$(group B). Specimens were sintered at different temperatures (1010, 1030, $1050^{\circ}C$) for 2 hours in air followed by an air cooling. Then, effects of various composition and sintering temperatures on the microstructure and the magnetic properties such as inductions, coercive forces, and initial permeabilities of the Cu-Zn-Mg ferrites were investigated. The average grain size increased with the increase of sintering temperature. The magnetic properties obtained from the aforementioned Cu-Zn-Mg ferrite specimens were 1,724 gauss for the maximum induction, 1.0 oersted for the coercive force, and 802 for the initial permeability. These magnetic properties indicated that the specimens could be utilized as the core of IFT (intermediate frequency transformer) and antenna in the amplitude modulation.

• 한국자기학회지
• /
• 제18권1호
• /
• pp.43-47
• /
• 2008

[ $ZnO-Bi_2O_3-Al_2O_3-B_2O_3-SiO_2$ ] nano-glass를 sol-gel 법으로 제조 하였다. 평균 입자 크기는 60.3 nm였으며 매우 균일한 입도 분포를 가졌다. Nano-glass를 NiZnCu ferrite의 저온소성용 소결조제로 사용하였으며 NiZnCu ferrite에 nano-glass를 첨가한 후 $840{\sim}900^{\circ}C$에서 2시간 소결을 진행하였다. 소결성 및 자기적 특성에 대해 연구하였으며 밀도, 수축율, 초투자율, 품질계수, 및 포 화자화값을 측정하였다. nano-glass를 0.5 wt% 첨가하여 $900^{\circ}C$에서 소결한 토로이달 core 시편의 초투자율은 1 MHz에서 측정 시 193.3의 값을 가졌다. 초투자율과 포화자화값은 소결온도가 증가함에 따라 증가하는 경향을 나타내었다. sol-gel 법에 의해 제조된 $ZnO-Bi_2O_3-Al_2O_3-B_2O_3-SiO_2$ nano-glass를 칩인덕터용 NiZnCu ferrite의 저온 소결조제로 사용 가능함을 알 수 있었다.

• 콘크리트학회논문집
• /
• 제29권3호
• /
• pp.267-273
• /
• 2017

최근 콘크리트 구조물의 유지보수 문제가 대두되면서 구조물에 발생하는 균열을 스스로 치유하는 자기치유 기술이 활발히 연구되고 있다. 현재 자기치유 콘크리트의 치유 성능 평가에 투수시험이 널리 사용되지만, 이와 관련된 표준화된 방법이 없어 시험결과의 비교에 어려움이 있다. 또한 콘크리트의 자기치유 성능은 초기 균열폭에 큰 영향을 받는데, 콘크리트의 균열폭 측정을 위한 표준화된 방법도 없는 실정이다. 따라서 본 연구에서는 정수위 투수시험 장치를 이용하여 수두차와 균열폭이 유출수량에 미치는 영향을 분석하였다. 또한 투수 실험 결과의 회귀 분석을 통해 유출수량과 초기 균열폭의 상관관계식을 제안하였으며, 제안된 식을 이용하여 예측한 모르타르 시편의 균열폭이 광학현미경을 이용하여 측정한 실제 균열폭과 잘 일치하는 결과를 얻었다.

• 한국자기학회지
• /
• 제2권2호
• /
• pp.91-98
• /
• 1992

$Co_{67}Fe_{4.5}Nb_{2}Si_{10}B_{15}$ 비정질합금리본에서 2단 어닐링이 자기특성에 미치는 영향을 조사 하였다. 고온인 $480^{\circ}C$ 이상에서 20분간 1단 어닐링한 리본을 저온인 $310^{\circ}C$에서 2시간 동안 2단으로 진공어닐링한 결과 보자력과 각형비는 1단 어닐링한 경우와 거의 비슷한 값들을 나타내었으나, 직류 및 교류투자율은 1단 어닐링에 비해 현저히 높아졌다. 2단 어닐링시 직류 및 1 kHz에서의 교류투자율의 최대치는 각각 약 290,000과 41,000으로서 1단 어닐링에 비해 30% 이상 증가하였다. 어닐링온도에 따른 자성의 변화는 3단계로 나누어 내부응력, 자구크기, cluster 및 결정상의 변화를 주요 요인으로 하여 고찰하였다.

• 터널과지하공간
• /
• 제31권1호
• /
• pp.41-51
• /
• 2021

치밀 저류층의 투과도 증진을 위해 개발된 수압파쇄 기술은 셰일가스와 같은 비전통자원과 심부지열 개발에 필수적인 기술 중 하나이다. 파쇄형태가 단순하고 파쇄효율이 좋지 않은 수압파쇄를 개선하기 위해 다양한 파쇄유체를 이용한 실험적 연구가 진행되었다. 물, N2, CO2 가스를 파쇄유체로 사용하여 치밀 암석에 대한 파쇄형태와 효율성을 분석하였다. 파쇄유체로 물을 일정 주입속도로 주입한 경우 순간적으로 압력이 상승하여 파쇄가 발생하였으나, 파쇄유체로 가스를 주입한 경우 서서히 압력이 증가되면서 물보다 낮은 파쇄압력을 보였다. 3D 단층촬영 기법을 이용하여 물과 가스 주입으로 생성된 균열을 관찰한 결과는 기존 공극부피 대비 파쇄 자극부피가 각각 5.71%(물), 12.72%(N2), 43.82%(CO2) 증가되었다. 또한 파쇄유체의 파쇄 효율성을 검정하기 위한 파쇄 전후 투과도 변화 실험에서는 가스 파쇄에 의해 증가되는 투과도 증가 값이 물을 이용한 파쇄보다 훨씬 높게 측정되었다. 파쇄 이후 인공균열의 생성과 주변응력에 의해 다시 균열이 닫히는 현상을 고려하여 생성된 인공균열에 구속압을 단계별로 증가시켜 투과도 변화를 측정하였다. 구속압이 2MPa에서 10MPa로 증가시켰을 경우 초기 투과도 대비 각각 89%(N2), 50%(CO2) 감소하였다. 본 연구는 가스파쇄기술이 수압파쇄보다 투과도 증진 효과가 크고 이후 주변 응력에 의한 투과도 감소가 적은 것으로 나타났다.

• 한국세라믹학회지
• /
• 제30권5호
• /
• pp.357-364
• /
• 1993

Chemical reaction occurred in the interface of Mn-Zn ferrite and glass after bonding. Effects of the formation of reaction layer on the magnetic properties were investigated. The composition of glass was 23PbO-61SiO2-6ZnO-8Na2O-2K2O and the ferrite was chosen to have a high permeability. Toroid samples of ferrites bonded with glasses, were heat-treated at $700^{\circ}C$, 80$0^{\circ}C$ and 90$0^{\circ}C$ for 1h. The reaction was observed to increase with bonding temperature, resulting in the development of reaction layer. Subsequently the initial permeability was found to be decreased. The permeabilities decreased by 25% with increasing bonding temperature from $700^{\circ}C$ to 80$0^{\circ}C$. At the bonding temperature of 90$0^{\circ}C$, the permeability was decreased by 45%, compared to that of 80$0^{\circ}C$.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.799-804
• /
• 2003

The purpose of this study was to investigate the effects of re-vibration and curing temperature onto the physical properties of latex-modified concrete with ordinary cement and rapid-setting cement, and thus to provide a guide line of re-vibration and curing conditions for good quality controls. The main experimental variables included two cement types(ordinary portland cement, rapid-setting cement), curing Temperature($10^{\circ}C$, $20^{\circ}C$, $30^{\circ}C$), re-vibration methods(continued, intermittent), and re-vibration times(initial setting, one day after mixing). The experimental results showed that the re-vibration affected little to the mechanical properties of LMC and RSLMC, while, the curing temperature a quite some. The early strength development was the highest at $20^{\circ}C$ curing temperature, and decreased at higher temperature. The permeability of concrete generally decreased with curing time. The rapid chloride permeability was a function of time and temperature. The chloride permeability of RSLMC was so small and negligible.