• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.429-432
• /
• 2008

Large area members such as foundation concrete of underground structures in power plants have an effect on structural stability and durability of the structure due to danger of crack occurrence and shrinkage crack that occur owing to the difference of temperature by heat of hydration between inside and outside of the members at initial age. And a construction for waterproofness is performed additionally to protect marine structures from osmosis of seawater because the structures adjoin below the surface of sea. So, if a rise of the heat of hydration, crack, and corrosion of bars are controled effectively using a composite such as fluosilicate salt in concrete production process of a initial construction, expenses are cut down and construction hours are reduced by securing durability through improvement of watertightness. The property tests of adiabatic temperature by hydration are carried out at initial age about standard concrete and test concrete using a fluosilicate salt composite to evaluate an effect on improvement of watertightness for concrete structures in this study. And the experiments such as a permeability test of hardened concrete, a water absorption test, a compression strength test and a elongation test are carried out and the results from these are described.

• 자원리싸이클링
• /
• 제12권6호
• /
• pp.13-18
• /
• 2003

Fe($NO_3$)$_3$ㆍ$9H_2$O, Zn($NO_3$)$_2$ㆍ$6H_2$O, Ni($NO_3$3)$_2$ㆍ $6H_2$O, Cu($NO_3$)$_2$ㆍ $3H_2$O와 같은 질산 금속염들을 $150^{\circ}C$로 24시간 동안 열분해하여 최초 NiCuZn ferrite 분체를 얻었으며, 이 분체 시료를 $500^{\circ}C$로 가소한 후 각각 볼밀 분쇄를 행하고 $700∼1000^{\circ}C$까지 각각 1시간씩 소결을 행하여 이에 대한 자기적 특성을 조사하였다. 일반 세라믹스 공정 보다 질산금속염들의 $ 200^{\circ}C$이하의 저 융점인 것을 이용하여 이들 출발 시료를 $150^{\circ}C$의 저온에서 액상의 화학결합이 가능하게 입자간의 거리를 분자적 거리로 좁힐 수 있었으며, 이로 인해 소결반응 점을 최소한 200∼ $300^{\circ}C$ 이상 낮출 수 있었다. 또한 이들의 초투자율은 50∼490, 포화자속밀도 및 보자력은 각각 2,400G와 0.3∼1.2 Oe정도로 보통의 ferrite 소결체의 특성과 유사하게 나타났다.

• Journal of Magnetics
• /
• 제11권1호
• /
• pp.30-35
• /
• 2006

A thorough study about the influences of Mn substitution for Fe on the microstructure and magnetic characteristics of $Fe_{73.5-x}Mn-{x}Si_{13.5}B_{9}Nb_{3}Cu_1$ (x = 1, 3, 5) alloys prepared by the melt-spinning technique has been performed. Nanocomposites composed of nanoscale $(Fe,Mn)_{3}Si$ magnetic phase embedded in an amorphous matrix were obtained by annealing their amorphous alloys at $535^{\circ}C$ for 1 hour. The addition of Mn causes a slight increase in the mean grain size. The Curie temperatures of the initial amorphous phase and of the nanocrystals phase decreased, while the Curie temperature of the remaining amorphous phase remained nearly constant with increasing Mn content. Soft magnetic properties of the crystallized samples have been significantly improved by a proper thermal treatment. Accordingly, the giant magnetoimpedance effect is observed and ascribed to the increase of the magnetic permeability, and the decrease of the coercivity of the samples. The increased magnetic permeability is resulted from a decrease in the magnetocrystalline anisotropy and saturation magnetostriction.

• 한국자기학회지
• /
• 제7권2호
• /
• pp.69-75
• /
• 1997

Mn-Zn 페라이트의 소결에 영향을 주는 산화물 첨가제와 자기이방성 상수( $K_{1}$)값이 zero가 되는 온도, $T_{spm}$를 결정해주는 산소분압을 변화시켜가며 전력손실, 미세구조, 초기투자율, 소결밀도, 온도에 따른 초기투자율의 변화를 관찰하였다. 산화물 첨가계는 초기투자율과 소결밀도를 증가시켰으며 동시에 낮은 전력손실을 나타내었다. 이러한 첨가제들은 입계에 석출되는 것으로 $T_{spm}$과 $T_{c}$(큐리온도)와 같은 자기적 성질을 변화시키지 않았다. 온도에 따른 초기투자율 변화는 냉각시 산소분압이 증가함에 따라 $T_{spm}$이 높은 온도로 이동함이 관찰되었다. 또한 냉각시 산소분압조절 만으로는 승온과 소결시 결정된 페라이트의 치밀화가 완전히 보정되지 못함도 확인되었다.확인되었다.

• 한국농공학회지
• /
• 제31권3호
• /
• pp.70-80
• /
• 1989

In this research program special triaxial compression tests and dehydration-swelling tests under the condition of freeze-thaw process were conducted to show the effects of freezethaw process on the physical properties of weathered granite soil, and their results as follows; 1.Consolidation settlement of weathered granite soil mass was increased due to freeze-thaw process, and the initial tangent coefficient of dense state was higher than that of loose state. 2.Compression behaviour of soil was increased according to the decrease of freezing temperature, and when the freezing temperature was reached under - 10$^{\circ}$C, the compression rate was not influenced by change of freezing temperature. 3.The experiments showed that the void ratio and permeability of soil were converged into their values of shrinkage limit, and the permeability was higher due to the freeze-thaw process and as the lower the freezing temperature. 4.The decrease of liquid limit was indicated as the lower the freezing temperature, and as more the freeze4haw cycles, the moisture content was shown the lower side. 5.It was shown that the shrinkage was decreased by freeze-thaw process and not influenced by way of freezing temperature, but dehydration rate was higher.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.905-908
• /
• 2001

The microstructure and the magnetic properties of Mn-Zn ferrite, which were power loss and saturation magnetic flux density, were investigated as the function of the process before firing. The highest initial permeability and the lowest power loss were attained to the specimen with CaO 400 ppm as a resulted from the highest solubility to SiO$_2$and the creation of liquid phase which improved sintering. The biggest grain size, the highest saturation magnetic flux density and the lowest power loss, which was resulted from that the eddy current loss increased as grain size increased but the hysteresis loss much more decreased and the hysteresis loss strongly influenced on the total power loss rather than the eddy current loss, were obtained to the Mn-Zn ferrite added 2wt% PVA. The power loss was lowest and the saturation magnetic flux density was highest in case of 1 ton/$\textrm{cm}^2$ and the grain size was not influenced.

• 산업기술연구
• /
• 제29권B호
• /
• pp.73-80
• /
• 2009

This paper is to investigate effect of B.G.I (Best Grouting Innovation) method on reinforcing ground. In this thesis, extensive literature review was performed to summarize theoretical backgrounds of grouting and to compare the applicability of different grouting methods. Unconfined compression test with specimen prepared by injecting different grouts of B.G.I, S.G.R and L.W methods and by changing the curing time were carried out to figure out characteristics of initial unconfined compression strength mobilized in the early stage. As results of test, the compression strength increases with curing times and specimen prepared with grouts of B.G.I method show greater values than others. On the other hands, the measured values of pH are in the range of 7-10 during tests. In field, preliminary construction to main construction at several sites were performed to confirm the effect of reinforcing the ground by application of B.G.I method. From the results of permeability test in field, SPT test and phenol reaction test, it was found that N values after grouting are greater than those before grouting and values of permeability in grouted ground is reduced significantly.

• 대한토목학회논문집
• /
• 제31권1D호
• /
• pp.83-90
• /
• 2011

도로하부 혹은 성토부를 구성하는 다져진 지반재료들은 불포화상태로 존재하는 관계로 재료의 침투 혹은 배수에 대한 평가시 불포화지반의 특성이 반영하는 것이 필요하다. 이에 본 연구에서는 강우강도와 시간조건에서 도로하부 재료에서 어떠한 영향이 있는지를 파악하고자 수치해석적인 연구를 수행하였다. 기존의 실험을 통해 획득한 불포화 함수특성 자료를 활용하였으며 SWCC를 통하여 투수계수를 추정하였다. 제안된 방법을 통하여 시간 변화에 대한 침투 및 배수성능을 평가하였다. 연구결과 침투 및 배수 과정에서 초기흡수력의 여부와 함수특성곡선의 경로에 따라서 많은 영향을 받고 있음을 알 수 있다.

• 약학회지
• /
• 제35권1호
• /
• pp.45-60
• /
• 1991

lonophores, uniquely, create specific pathways of ion permeability in model and cell membranes. Calcium-transporting ionophores of microbiological origin, such as A23187 and ionomycin, have been used as experimental tools to elucidate the physiological role of calcium as a second messenger in many cell types. These ionophores are believed to bypass the initial ligand-receptor step in the activation of cells by increasing membrane permeability to calcium. In this report, we shall discuss several naturally occurring substances that share some properties of calcium-ionophores, primarily concentrating on oxidized fatty acids. We have previously demonstrated that oxidized linoteic and arachidonic acids, obtained either by lipoxygenase catalysis or nonenzymatic processes, significantly promote calcium translocation in a two-phase partition model and modulate calcium-transporting function in the isolated sarcoplasmic reticulum vesicles obtained from mammalian hearts. We have also confirmed that calcium-ionophoric properties are due not to their general amphiphilic nature of certain lipids, but to distinct structural characteristics. Although there are some skeptical views on the occurrence of ionophores in higher organisms, increasing evidence suggests that membrane lipids or their derivatives may serve as physiological calcium-ionophores. Abnormal accumulation of lipid peroxidation products(particularly end products), however, may be associated with the general oxidative damages as seen in many pathological conditions.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2001년도 종합학술발표회 논문집 Vol.11 No.1
• /
• pp.304-309
• /
• 2001

With the development of electromagnetic communication technology and increased use of electromagnetic wave, the countermeasure of EMI(Electromagnetic Interference) becomes more important socially, and interest for the electromagnetic wave absorber has also increased. In this paper, we have studied characteristics of frequency dependency on complex permittivity and complex permeability according to the changes of composition rate and sintering temperature of NiCuZn ferrite also known as electromagnetic wave absorber and further looked into effect of electromagnetic wave absorption properties. From the measurement where the composition of Fe$_2$O$_3$ and ZnO of NiCuZn ferrite was fixed at 49 and 34 mol% respectively while composition of NiO and CuO has been varied at each test, we found out that initial permeability and permittivity were high and the absorbing ability of electromagnetic wave recorded best with loss tangent(${\mu}$r"/${\mu}$r′) displays more than 1 within the frequency band of 2MHz～9.5MHz when the composition ratio of NiO was ranged around 8.5～9.5 mol% and the sintering temperature was 1,080$^{\circ}C$.