• 대한조선학회지
• /
• 제8권1호
• /
• pp.29-40
• /
• 1971

In order to study the problem on form factor of hull form, towing test of a full ship model was carried out for different initial trims under both full and half load conditions. The results were fully discussed on the mutual relations among initial trim, mean sinkage and trim change in run, and form factor. There exists optimum initial trim in regard to form factor. Mean sinkage and trim change in run can be expressed in a uninominal approximation in the form of $k_i{\cdot}{F_n}^{2.2}$. The coefficients of this approxmation are related linearly with the initial trim. Form factor changes according to Froude number. It is considered that the trim change in run is a main reason of the fact.

• Steel and Composite Structures
• /
• 제30권5호
• /
• pp.483-492
• /
• 2019

In the current study, the influence of the initial lateral (sweep) shape and the cross-sectional twist imperfection on the lateral torsional buckling (LTB) response of doubly-symmetric steel I-beams was investigated. The material imperfection (residual stress) was not considered. For this objective, standard European IPN 300 beam with different unbraced span was numerically analyzed for three imperfection cases: (i) no sweep and no twist (perfect); (ii) three different shapes of global sweep (half-sine, full-sine and full-parabola between the end supports); and (iii) the combination of three different sweeps with initial sinusoidal twist along the beam. The first comparison was done between the results of numerical analyses (FEM) and both a theoretical solution and the code lateral torsional buckling formulations (EC3 and AISC-LRFD). These results with no imperfection effects were then separately compared with three different shapes of global sweep and the presence of initial twist in these sweep shapes. Besides, the effects of the shapes of initial global sweep and the inclusion of sinusoidal twist on the critical buckling load of the beams were investigated to unveil which parameter was considerably effective on LTB response. The most compatible outcomes for the perfect beams was obtained from the AISC-LRFD formulation; however, the EC-3 formulation estimated the $P_{cr}$ load conservatively. The high difference from the EC-3 formulation was predicted to directly originate from the initial imperfection reduction factor and high safety factor in its formulation. Due to no consideration of geometric imperfection in the AISC-LFRD code solution and the theoretical formulation, the need to develop a practical imperfection reduction factor for AISC-LRFD and theoretical formulation was underlined. Initial imperfections were obtained to be more influential on the buckling load, as the unbraced length of a beam approached to the elastic limit unbraced length ($L_r$). Mode-compatible initial imperfection shapes should be taken into account in the design and analysis stages of the I-beam to properly estimate the geometric imperfection influence on the $P_{cr}$ load. Sweep and sweep-twist imperfections led to 10% and 15% decrease in the $P_{cr}$ load, respectively, thus; well-estimated sweep and twist imperfections should considered in the LTB of doubly-symmetric steel I-beams.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2001년도 The Seoul International Simulation Conference
• /
• pp.464-467
• /
• 2001

A good arithmetic random number generator should possess full period, uniformity and independence, etc. To obtain the excellent random number generator, many researchers have found good parameters. Also an initial seed is the important factor in random number generator. But, there is no theoretical guideline for using the initial seeds. Therefore, random number generator is usually used with the arbitrary initial seed. Through the empirical tests, we show that the choice of the initial values for the seed is important to generate good random numbers.

• Korean Journal of Mathematics
• /
• 제14권1호
• /
• pp.85-93
• /
• 2006

A good arithmetic random number generator should possess full period, uniformity and independence, etc. To obtain the excellent random number generator, many researchers have found good parameters. Also an initial seed is the important factor in random number generator. But, there is no theoretical guideline for using the initial seeds. Therefore, random number generator is usually used with the arbitrary initial seed. Through the empirical tests, we show that the choice of the initial values for the seed is important to generate good random numbers.

• 한국강구조학회 논문집
• /
• 제17권5호통권78호
• /
• pp.527-536
• /
• 2005

외부 긴장재를 이용한 보강공법은 효과적인 보강기술의 하나로써 연구되고 있으며 그 적용사례가 증가하고 있다. 본 논문에서는 기존 강합성 교량의 내하력 향상을 위해 외부 긴장재의 초기 긴장력 결정 방법을 제안하였다. 긴장재의 배치 형상과 재하되는 활하중의 종류에 따른 증가 프리스트레스력 계산식을 구하여 강합성보의 보강효과를 수치적으로 분석하였다. 증가 프리스트레스력을 고려한 내하율 산정 방법을 제안하여 긴장재 개수와 초기 긴장력의 계산 방법을 제시하였다. 제안된 방법을 실교량에 적용하여 합리성을 보였다.

• Nuclear Engineering and Technology
• /
• 제42권4호
• /
• pp.450-459
• /
• 2010

The present paper investigates the collapse pressure of cylinders with intermediate thickness subjected to external pressure based on detailed elastic-plastic finite element (FE) analyses. The effect of the initial ovality of the tube on the collapse pressure was explicitly considered in the FE analyses. Based on the present FE results, the analytical yield locus, considering the interaction between the plastic collapse and local instability due to initial ovality, was also proposed. The collapse pressure values based on the proposed yield locus agree well with the present FE results; thus, the validity of the proposed yield locus for the thickness range of interest was verified. Moreover, the partial safety factor concept based on the structural reliability theory was also applied to the proposed collapse pressure estimation model, and, thus, the priority of importance of respective parameter constituting for the collapse of cylinders under external pressure was estimated in this study. From the application of the partial safety factor concept, the yield strength was concluded to be the most sensitive, and the initial ovality of tube was not so effective in the proposed collapse pressure estimation model. The present deterministic and probabilistic results are expected to be utilized in the design and maintenance of cylinders subjected to external pressure with initial ovality, such as the once-through type steam generator.

• 약학회지
• /
• 제48권1호
• /
• pp.6-12
• /
• 2004

Near-infrared spectra of methanol-water mixtures and acetonitrile-water mixtures were acquired to find interactions between solvents widely used for reverse-phase liquid chromatography. Mixtures were prepared to give a series of increasing mole fractions of methanol or acetonitrile in water. Data matrices of acquired spectra were analyzed to determine the proper number of principal components of each mixture system using Malinowski's factor indicator function. Initial guess of score matrix and loading matrix were calculated by nonlinear iterative partial least squares (NIPALS) algorithm for faster computation. Iterative target transform factor analysis (ITTFA) was applied to convert the initial estimation of score matrix to true concentration profile and loading matrix to pure spectra of pure components of the mixtures. In case of methanol-water the number of principal components was found to be 4 and those initial guess of factors were converted to the pure spectra of water methanol and two kinds of complexes. In case of acetonitrile-water the number of pure components of the mixtures was found to be 3 and the pure spectrum of acetonitrile-water complex was found. The nonlinear characteristics of concentration profiles of complexes in the solvent mixtures may give a good criteria in understanding their elution characteristics in reverse-phase liquid chromatogrsphy.

• 한국구조물진단유지관리공학회 논문집
• /
• 제13권2호통권54호
• /
• pp.153-164
• /
• 2009

본 논문에서는 2경간 강합성교량의 내하력을 향상시키기 위해, 외부 긴장재로 보강하는 방법을 제시하였다. 긴장재를 직선 배치하였을 경우, 외부하중으로 인한 증가 프리스트레스력을 가상일의 원리로 구하였고, 증가 프리스트레스를 고려한 내하율 산정식을 제시하였다. 제안된 내하율 산정식으로부터, 긴장재 개수와 초기 긴장력의 계산방법을 제시하였다. 본 방법을 2경간 강합성교량에 적용하여, 산정식의 타당성과 합리성을 검증하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제11권5호
• /
• pp.123-134
• /
• 2007

본 논문은 기존 강합성 교량의 내하력 향상을 목적으로 외부 긴장재의 초기 긴장력 결정 방법을 제시하였다, 외부 긴장력은 콘크리트 슬래브 재시공 전과 후에 각각 적용하였다. 활하중에 의하여 발생하는 증가 프리스트레스력을 고려한 내하율식을 제안하여 긴장재 개수와 초기 긴장력의 결정 과정을 제시하였다. 기존 강합성 교량의 내하율 향상에 적용하여 그 타당성을 입증하였다.

• 한국물환경학회지
• /
• 제24권6호
• /
• pp.793-800
• /
• 2008

Recently domestic drinking water industry has recognized membrane-based technology as a promising alternative for water treatment. To ensure successful application of membrane processes, the integrity of membrane systems should be maintained. According to US EPA guidance, the pressure decay test based on the bubble point theory is recommended to detect any membrane defection of which size is close to the smallest diameter of Cryptosporidium oocysts, $3{\mu}m$. Proper implementation of the pressure decay test is greatly affected by initial test pressure, and the interpretation of the test results is associated with upper control limit. This study is conducted to investigate various factors affecting determination of initial test prtessure and upper control limit, including membrane-based parameters such as pore shape correction factor, surface tension and contact angle, and system-based parameters, such as volumetric concentration factor and total volume of system. In this paper, three different hollow fibers were used to perform the pressure decay test. With identical initial test pressure applied, their pressure decay tendency were different from each other. This finding can be explained by the micro-structure disparity of those membranes which is verified by FESEM images of those membranes. More specifically, FESEM images revealed that three hollow fibers have asymmetry, deep finger, shallow finger pore shape, respectively. In addition, sensitivity analysis was conducted on five parameters mentioned above to elucidate their relation to determination of initial test pressure and upper control limit. In case of initial pressure calculation, the pore shape correction factor has the highest value of sensitivity. For upper control limit determination, system factors have greater impact compared to membrane-based parameters.