Strengthening Design by External Pre-tensioning and Post-tensioning Methods for Steel-concrete Composite Girders using Rating Factor

내하율을 이용한 강합성보의 외부 프리텐션과 포스트텐션 보강 설계

  • Received : 2006.06.23
  • Published : 2007.09.30

Abstract

A method to determine the initial force of external tendon is proposed to improve the load carrying capacity in existing steel-concrete composite bridges. This method is applied to tensioning external tendons prior to and after concrete replacement for strengthening composite girders. A procedure to determine the number of tendon and initial tendon force is described with the proposed rating factor, which considers the increment of tendon force due to live loads. The method is applied to the improvement of rating factor in an existing composite bridge and its validity is confirmed.

본 논문은 기존 강합성 교량의 내하력 향상을 목적으로 외부 긴장재의 초기 긴장력 결정 방법을 제시하였다, 외부 긴장력은 콘크리트 슬래브 재시공 전과 후에 각각 적용하였다. 활하중에 의하여 발생하는 증가 프리스트레스력을 고려한 내하율식을 제안하여 긴장재 개수와 초기 긴장력의 결정 과정을 제시하였다. 기존 강합성 교량의 내하율 향상에 적용하여 그 타당성을 입증하였다.

Keywords

Acknowledgement

Supported by : 한국건설교통기술평가원

References

  1. 김기봉, 정영수, 최혁주, 강보순 (1998), "외부 후긴장으로 보강한 합성보에 대한 실험적 연구," 한국 강구조학회 논문집, 한국강구조학회, 제10권, 제4호, 1998, pp. 701-708.
  2. 박영훈, 최준혁, 박용걸, "공용중인 판형교의 강성을 고려한 외부 후 긴장 보강," 대한토목학회논문집, 대한토목학회, 제24권, 제3A호, 2004, pp. 445-453.
  3. 박용걸, 박영훈, 이승용, "외부 후 긴장 공법을 이용한 강합성보의 보강에 관한 연구," 한국강구조학회논문집, 한국강구조학회, 제12권, 제5호, 2000, pp. 549-558.
  4. 백동훈, 이우현, 김기봉, "후긴장을 이용한 연속 합성격자형교의 보강방법에 대한 연구," 한국강구조학회논문집, 한국강구조학회, 제9권, 제3호, 1997, pp. 441-455.
  5. 정승인, 류형근, 장승필, "외부 프리스트레스트 강합성교량의 탄소성 휨 거동해석," 한국강구조학회논문집, 한국강구조학회, 제15권, 제1호, 2003, pp. 59-68.
  6. 조두용, 박대열, 박선규, "현장실험을 통한 외부 후긴장 Steel I-Beam의 휨 거동 특성," 한국구조물진단학회논문집, 한국구조물진단학회, 제6권, 제3호, 2002, pp. 151-158.
  7. 최동호, 정상환, 유동민, "외부 긴장재로 보강된 강합성보의 내하율 산정식을 이용한 초기 긴장력 결정," 한국강구조학회논문집, 한국강구조학회, 제17권, 제5호, 2005, pp. 527-536.
  8. Regan, R. S. and Krahl, N. W., "Behavior of Prestressed Compisite Beams", Journal of the Sturctural Division, ASCE, Vol. 93, No. 12, 1967, pp. 87-108.
  9. Saadatmanesh, H, Albrecht, P. and Ayyub, B. M., "Analytical Study of Prestressed Composite Beams," Journal of Sturctural Engineering, ASCE, Vol. 115 No. 9, 1989a, pp. 2364-2381. https://doi.org/10.1061/(ASCE)0733-9445(1989)115:9(2364)
  10. Saadatmanesh, H., Albrecht, P., and Ayyub, B. M., "Experimental Study of Prestressed Composite Beams," ASCE Journal of Structural Engineering, Vol. 115, No. 9, 1989b, pp. 2348-2363. https://doi.org/10.1061/(ASCE)0733-9445(1989)115:9(2348)
  11. Saadatmanesh, H., Albrecht, P. and Ayyub, B. M., "Guidelines for Flexural Design of Prestressed Composite Beams," Journal of Structural Engineering, ASCE, Vol. 115, No. 11, 1989, pp. 2944-2961. https://doi.org/10.1061/(ASCE)0733-9445(1989)115:11(2944)
  12. Tong, W. and Saadatmanesh, H., "Parametric Study of Continuous Prestressed Composite Girders," Journal of Sturctural Engineering, ASCE, Vol. 118, No. 1, 1992, pp. 186-206. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:1(186)
  13. Troitsky, M. S., "Prestressed Steel Bridges Theory and Design," Van Nostrand Reinhold Company, USA, 1990.
  14. Troitsky, M. S., Zielinski, Z. A., and Nouraeyan, A., "Pre-Tensioned and Posttensioned Composite Girders," ASCE Journal of Structural Engineering, Vol. 115, No. 12, 1989, pp. 3142-3153. https://doi.org/10.1061/(ASCE)0733-9445(1989)115:12(3142)