• 한국인터넷방송통신학회논문지
• /
• 제13권6호
• /
• pp.115-121
• /
• 2013

본 논문은 송신 부호가 대역 제한, 위상 찌그러짐이 존재하는 비선형 통신 채널을 통과할 때 발생되는 부호간 간섭을 보상하기 위한 블라인드 등화 알고리즘인 SE-MMA (Signed-Error MMA)의 roburstness 성능을 개선할 수 있는 DSE-MMA (Dithered Sign-Error MMA)에 관한 것이다. SE-MMA는 등화기의 탭 계수 갱신을 위하여 곱셈 대신 1 bit 양자화기를 사용하므로 알고리즘의 연산량을 줄일 수 있어 H/W 응용에 유리하지만, 양자화 과정에서 발생되는 정보 손실에 의하여 전체적인 블라인드 등화 성능 알고리즘이 MMA보다 열화되는 단점이 있다. DSE-MMA는 SE-MMA의 단점 중에서 roburstness를 나타내는 SER 성능을 개선키 위하여 양자화 전에 dither 신호를 이용하는 Dithered Signed-Error 개념을 MMA에 적용하였으며, SE-MMA 와 MMA 알고리즘이 갖는 부호간 간섭에 의한 진폭과 위상 찌그러짐을 동시 보상 능력을 갖는다. 논문에서 DSE-MMA 블라인드 등화 알고리즘의 성능을 나타내는 지수로는 등화기 출력 신호, 잔류 isi, MD (Maximum Distortion), MSE와 SER를 사용하였으며, 이들 성능 지수를 적용할 때 SE-MMA 알고리즘과 비교하기 위하여 컴퓨터 시뮬레이션을 수행하였다. 시뮬레이션 결과 DSE-MMA가 SE-MMA 보다 roburstness 와 정상 상태 이후 성능 지수의 양에서 개선됨을 알 수 있었지만, 초기 상태에서 정상 상태에 도달하는 수렴 속도에서는 늦어짐을 확인하였다.

• 천문학논총
• /
• 제27권5호
• /
• pp.419-429
• /
• 2012

In this paper, we propose a new re-quantization method after FFT processing to prevent the distortion of correlation result of VCS (VLBI Correlation Subsystem). The re-quantization is used to rearrange the data bit so as to reduce the data rate processed as 16-bit of FFT result of VCS. Having done this procedure, we found that the distorted spectrum of correlation result occurred in the delay tracking experiments by the re-quantization method introduced for initial design of VCS. In order to solve this, two kinds of re-quantization method, that is, the comparison and selection-type, are proposed. The first is to re-quantize the FFT result as a valid-bit by comparing with the input data after determining the adequate threshold. The second is manually to select the valid-bit of FFT result after finding the valid-field of data according to the bit-distribution of input data. We confirmed that the second is more effective compared with the first through the experimental result, and it will be implemented without so much modification of applied method in the condition of the limited resource of FPGA. The re-quantization is, however, carried out with 4-bit in the proposed second method for FFT result, and then the distortion of correlation result is also appeared. To fix this problem, the bit for re-quantization is extended to 8-bit. The proposed 8-bit selection-type is effectively verified so that the distortion of correlation result disappeared by applying to VCS in consequence of the simulation and correlation experiments.

• 한국전산구조공학회논문집
• /
• 제37권3호
• /
• pp.163-171
• /
• 2024

본 논문에서는 다목적 구조물인 다중연결 해양부유체를 대상으로 변형 기반 모드 차수축소법을 적용하고 차수축소모델의 구조응답 예측 성능을 향상시키기 위해 유전 알고리즘 기반의 센서 배치 최적화를 수행하였다. 다중연결 해양부유체의 차수축소모델 생성에 필요한 변형 기반 모드 데이터를 얻기 위해 다양한 규칙파랑하중조건에 대한 유체-구조 연성 수치해석을 수행하고 변형 기반 모드의 직교성, 자기상관계수를 이용하여 주요 변형 기반 모드를 선정하였다. 다중연결 해양부유체의 경우 차수축소모델의 구조응답 예측 성능이 계측 및 예측 구조응답 위치에 따라 민감하기 때문에 유전 알고리즘 기반의 최적화를 수행하여 최적의 센서 배치를 도출하였다. 최적화 결과, 모든 센서 배치 조합에 대한 차수축소모델 생성 및 예측 성능 평가 대비 약 8배의 계산 비용을 절감하였으며, 예측 성능 평가 지표인 평균 제곱근 오차가 초기 센서 배치보다 84% 감소하였다. 또한, 다중연결 해양부유체 모형시험 결과를 이용하여 불규칙파랑하중에 대한 최적화된 센서 배치의 차수축소모델의 구조응답 예측 성능을 평가 및 검증하였다.

• 소성∙가공
• /
• 제15권6호
• /
• pp.445-452
• /
• 2006

In most of automobile body panel manufacturing, trimming process is generally performed before flanging. To find feasible trimming line is crucial in obtaining accurate edge profile after flanging. Section-based method develops blank along manually chosen section planes and find trimming line by generating loop of end points. This method suffers from inaccurate results of edge profile. On the other hand, simulation-based method can produce more accurate trimming line by iterative strategy. In this study, new fast simulation-based method to find feasible trimming line is proposed. Finite element inverse method is used to analyze the flanging process because final shape after flanging can be explicitly defined and most of strain paths are simple in flanging. In utilizing finite element inverse method, the main obstacle is the initial guess generation for general mesh. Robust initial guess generation method is developed to handle genera] mesh with very different size and undercut. The new method develops final triangular mesh incrementally onto the drawing tool surface. Also in order to remedy mesh distortion during development, energy minimization technique is utilized. Trimming line is extracted from the outer boundary after finite element inverse method simulation. This method has many advantages since trimming line can be obtained in the early design stage. The developed method is verified by shrink/stretch flange forming and successfully applied to the complex industrial applications such as door outer flanging process.

• 대한조선학회논문집
• /
• 제34권1호
• /
• pp.68-76
• /
• 1997

본 논문에서는 선박 및 해양 구조물을 구성하는 용접 판구조물의 변형 및 잔류응력 등 용접 초기 결함을 효율적으로 평가할 수 있는 열탄소성 해석방법을 정립하였다. 또한 평판의 선상가열공법(line heating process)을 열탄소성 시뮬레이션함으로써 작업의 고능률화 및 자동화를 위한 기초연구를 수행하였다. 판구조물에 대한 열전도 해석을 수행하기 위하여 해석적인 방법과 수치적인 방법을 병행하였다. 판구조물의 열탄소성 해석방법에 있어서는 초기변형도법에 근거한 유한요소법을 사용하였으며, 증분 구간중 소성 구역에서는 응력 증분 및 항복응력 중분의 2 차항까지 고려해서 시간 증분을 최적 제어함으로써 해석 불능에 빠지는 문제를 극복하였다. 특히 응력 중분에 탄성계수의 온도에 따른 증분을 2 차항까지 포함시켰다. 평판의 두께와 입열량을 변화시키면서 일련의 용접 열탄소성 실험을 수행하였는 바, 온도 및 용접 변형을 계측하여 수치 계산 결과와 비교하여 상호 부합성이 양호함을 확인하였다.

• 대한전자공학회논문지SP
• /
• 제41권3호
• /
• pp.121-127
• /
• 2004

This paper presents a new vertex selection scheme for shape approximation. In the proposed method, final vertex points are determined by "two-step procedure". In the first step, initial vertices are simply selected on the contour, which constitute a subset of the original contour, using conventional methods such as an iterated refinement method (IRM) or a progressive vertex selection (PVS) method In the second step, a vertex adjustment Process is incorporated to generate final vertices which are no more confined to the contour and optimal in the view of the given distortion measure. For the optimality of the final vertices, the dynamic programming (DP)-based solution for the adjustment of vertices is proposed. There are two main contributions of this work First, we show that DP can be successfully applied to vertex adjustment. Second, by using DP, the global optimality in the vertex selection can be achieved without iterative processes. Experimental results are presented to show the superiority of our method over the traditional methods.

• 한국세라믹학회지
• /
• 제28권6호
• /
• pp.437-442
• /
• 1991

Temperature and atmosphere dependence of electrical conduction of the metal Cu, Ag, Au films, vaccum evaporated on glass, was investigated. The structural changes of the metal films were examined by SEM and high temperature XRD. The electrical resistance slightly increased with initial temperature increase up to the inflection point and decreased to minimum value, after this rapidly increased with further temperature increased below minimum. These phenomena were caused by the thermally induced film failure as a result of the mass transport. The temperature for the film failure increased in the order of O2, Air, Vacuum, N2, Ar in Cu, Ag films and Air, Vacuum, N2, Ar in Au film. The increase of resistance at the lower temperature range was attributed to the lattice distortion by disordered crystal structure, while the decreasing resistance was attributed to the removal of structural defects and film densification.

• 천문학논총
• /
• 제32권1호
• /
• pp.37-39
• /
• 2017

We present the first results of a new data analysis pipeline for processing extragalactic AKARI/IRC images. The main improvements of the pipeline over the standard analysis are the removal of Earth shine and image distortion correction. We present the differential number counts of the AKARI/IRC S11 filter in the IRAC validation field. The differential number counts are consistent with S11 AKARI NEP deep and $12{\mu}m$ WISE NEP number counts, and with a phenomenological backward evolution galaxy model, at brighter fluxes densities. There is a detection of fainter galaxies in the IRAC validation field.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1999년도 봄 학술발표회 논문집
• /
• pp.335-342
• /
• 1999

It is well known that l-girders are weak in torsion and it might be more economical to use a box girder, which has great torsional rigidity. The use of box beams does, however, present a potential problem in that cross-sectional distortions can induce large warping normal stresses and transverse bending stress. Accordingly a sufficient number of diaphragms are provided to make the distortional effects minimal. In engineering practice, diaphragms are spaced in 5m intervals without reasonable basis. It is considered to be noneconomical design to the almost design engineers, and it may produce the unsafe structural systems in special cases such as curved bridges with large initial curvature. These problems have not been solved for the lack of adequate tools of structural analysis. In this study, on the basis of the parametric studies, the design formulas for the distortional warping stress and the reasonable diaphragm spacing of box girder were presented.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.690-693
• /
• 2003

An Si substrate (100) was oxidized at $400^{\circ}C$ in inductively coupled oxygen plasma. Interstitial oxygen was found in the Si substrate at the initial stage of oxidation by IR measurements. An x-ray rocking curve of Si substrates showed a lower peak intensity due to lattice distortion by the interstitial oxygen. The refractive index of thin oxides, below which interstitial oxygen existed in the Si substrate, was smaller than the refractive index of thick oxides, below which no interstitial oxygen existed. The interstitial oxygen was found by plasma oxidation using $O_{2}$ gas and $N_{2}O$ gas. The inductively coupled plasma oxidation using $N_{2}O$ gas was performed by atomic oxygen, not by molecular oxygen, indicating that atomic oxygen in plasma is responsible for the incorporation of interstitial oxygen.