• Journal of electromagnetic engineering and science
• /
• v.3 no.2
• /
• pp.79-85
• /
• 2003

In this paper, we investigated the degree of compensation for distorted optical pulse of wavelength division multiplexed(WDM) channel with initial frequency chirp generated in optical transmitter. The WDM channel signal distortion is due to chromatic dispersion, self phase modulation(SPM) and cross phase modulation(XPM) in fiber. The considered system is 3 ${\times}$ 40 Gbps intensity modulation direct detection(IM/DD) WDM transmission systems, which adopted mid-span spectral inversion(MSSI) as compensation method. We confirmed that the effect of initial frequency chirp on compensation for signal distortion due to a SPM is gradually decreased as a dispersion coefficient of fiber becomes gradually small. But, in the aspect of a compensation for signal distortion due to both SPM and XPM, the effect of initial frequency chirp on compensation is gradually decreased as a dispersion coefficient of fiber becomes gradually large.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.2
• /
• pp.67-72
• /
• 2011

This study had the goal of investigating the effect of the curvature along the heating line on the transverse angular distortion of plates having an initial curvature from line heating. A thermo-elasto-plastic analysis was carried out using 54 models with various radii of curvature, plate thicknesses, and heating speeds. The results show the effect of the curvature along the heating line on the angular distortion in relation to changes in the magnitudes of the curvature, heating speed, and plate thickness. The present numerical results show that the time history of the angular distortion after cooling and reaching the final deformed shape for a plate having an initial curvature is quite different from that of a flat plate. This emphasized the importance of considering the curvature effect on the transverse angular distortion. From the viewpoint of the curvature effect on the deformation, it has been seen that the curvature does not affect the transverse shrinkage. In this study the predicting formula for the transverse angular distortion was derived through a regression analysis. It showed that as the curvature increased, the angular distortion was reduced because of the higher bending rigidity at the same heat input parameter, and the peak points moved toward the origin as the curvature increased.

• Journal of Korea Multimedia Society
• /
• v.10 no.11
• /
• pp.1439-1445
• /
• 2007

In this paper, we propose a fast motion estimation algorithm using initial matching errors by sorting square sub-blocks to find complex sub-block area adaptively based on partial calculation of SAD(sum of absolute difference) while keeping the same prediction quality compared with the PDE(partial distortion elimination) algorithm. We reduced unnecessary calculations with square sub-block adaptive matching scan based initial SAD calculation of square sub-block in each matching block. Our algorithm reduces about 45% of computations for block matching error compared with conventional PDE(partial distortion elimination) algorithm without any degradation of prediction quality, and for algorithm will be useful to real-time video coding applications using MPEG-4 AVC or MPEG-2.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.58-58
• /
• 2010

The purpose of this study is to evaluate the structural safety at the topside weldment of hull structure, which was welded after launching. For it, the variations of residual stress and distortion at the topside weldment with loading conditions such as hull girder hogging bending moment after launching and free initial loading state was evaluated by using FEA. And the maximum stress range at the weldment under design loads specified by classification society was evaluated by FEA. In this case, the residual stress and welding distortion at the topside weldment was assumed to be initial imperfection. In accordance with FEA results, regardless of initial loading condition, tensile residual stress was found. However, the residual stress and welding distortion at the topside weldment produced under hogging condition was less than those of topside weldment under free loading state. That is, the amount of residual stress at the topside weldment decreased with an increase in the amount of tension load caused by hogging condition. It was because the compressive thermal strain at the topside weldment produced during welding was reduced by tensile load. However, the maximum stress range at the topside weldment under maximum hull girder bending moment was almost similar regardless of initial loading condition. So, if the problem related to the soundness of weldment is not introduced by initial load, the effect of initial loading condition during welding on fatigue strength of topside weldment could be negligible.

• Journal of Welding and Joining
• /
• v.32 no.1
• /
• pp.79-86
• /
• 2014

The purpose of this study is to determine the proper fillet weld size for the stiffeners on hull bottom plate of crude oil tanker. To achieve it, the effective notch stress and hot spot stress of the fillet weld with leg length specified in the rule were evaluated by using comprehensive FE analyses. Based on the results, the fatigue damages at each location of weld were calculated. Meanwhile the transitional behavior of initial welding distortion in the hull bottom plate under the design conditions was investigated by using a non-linear FEA. Welding distortion and residual stress introduced during fabrication process were considered as initial imperfections. According to FE analysis results, if the fillet leg length satisfies the design criteria of the classification society, the concern on the root failure at the fillet welds in the bottom hull plate during the design life can be negligible. In addition, considering the transitional behavior of the distortion during the service life, the fillet leg length should be minimized.

• Phonetics and Speech Sciences
• /
• v.5 no.1
• /
• pp.47-54
• /
• 2013

The aim of this study was to analyze consonant articulation errors produced by 90 speakers with cerebral palsy (CP). Phonetic transcriptions were made for 37 single-word utterances containing 70 phonemes: 48 initial consonants and 22 final consonants. Errors of substitution, omission, and distortion were analyzed using a confusion matrix paradigm showing the visualization of error patterns. Results showed that substitution errors in initial and final consonants were most frequent, followed by omission and distortion. Consonant omission occurred more frequently on final consonants. In both initial and final consonants, the within-place errors were more prominent than the within-manner errors. The current results suggest that consonant confusion matrices for dysarthric speech may provide useful information for evaluating speech intelligibility and developing automatic speech recognition system of adults with CP associated dysarthria.

• Journal of Magnetics
• /
• v.22 no.2
• /
• pp.257-265
• /
• 2017

This paper presents a 2-D analytical method to calculate the back EMF of the axial flux permanent magnet synchronous generator (AFPMSG) with coreless stator and dual rotor having magnets mounted on both sides of rotor yoke. Furthermore, in order to reduce the no load voltage total harmonics distortion (VTHD), the initial model of the coreless AFPMSG is optimized by using a developed analytical method. Optimization using the 2-D analytical method reduces the optimization time to less than a minute. The back EMF obtained by using the 2-D analytical method is verified by a time stepped 3-D finite element analysis (FEA) for both the initial and optimized model. Finally, the VTHD, output torque and torque ripples of both the initial and optimized models are compared with 3D-FEA. The result shows that the optimized model reduces the VTHD and torque ripples as compared to the initial model. Furthermore, the result also shows that output torque increases as the result of the optimization.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.421-424
• /
• 2000

In this paper, we propose a window warping method to solve stereo matching problems in projective distortion region. Because the projective distortion region cant t be estimated with fixed-size block matching algorithm, we use the window warping technique in block matching process. The position of a reference window to resample is obtained adaptively according to the degree of reliability in disparity estimated previously. The initial disparity and reliability are obtained by applying a well known hierarchical strategy. The experimental result shows that considerable improvement is obtained in the projective distortion region.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.3
• /
• pp.354-359
• /
• 2008

Clustering is a method to classify the given data set with same property into several classes. To cluster data, many methods such as K-Means, Fuzzy C-Means(FCM), Mountain Method(MM), and etc, have been proposed and used. But the clustering results of conventional methods are sensitively influenced by initial values given for clustering in each method. Especially, FCM is very sensitive to noisy data, and cluster center distortion phenomenon is occurred because the method dose clustering through minimization of within-clusters variance. In this paper, we propose a clustering method which reduces cluster center distortion through merging the nearest data based on the data weight, and not being influenced by initial values. We show the effectiveness of the proposed through experimental results applied it to various types of data sets, and comparison of cluster centers with those of FCM.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.3
• /
• pp.10-17
• /
• 1995

this thesis proposes a new echo canceller that can be used in a fulll-duplex digital subscriber loopmodem. The modem suffers from nonlinear distortion such as transmitted pulse asymmetry, saturation in transformers, and nonlinearity of data converters. The proposed nonlinear echo canceller can compensate the nolinear distortion by using a nonlinear digital filter based on canonical pieceewise-linear (CPWL) function. Numerical results based on computer simulation are given in this paper. It is shown that the convergence characteristics depend on the initial values of weights of linear filters with absoluters and that the nonlinearity in digital-to-analog(D/A) converter can be compensated by a relatively small number linear filters with absoluters. It is also shown that the proposed algorithm has a faster convergence rate in comparison with Voterra algorithm.