• Journal of electromagnetic engineering and science
• /
• 제3권2호
• /
• pp.79-85
• /
• 2003

In this paper, we investigated the degree of compensation for distorted optical pulse of wavelength division multiplexed(WDM) channel with initial frequency chirp generated in optical transmitter. The WDM channel signal distortion is due to chromatic dispersion, self phase modulation(SPM) and cross phase modulation(XPM) in fiber. The considered system is 3 ${\times}$ 40 Gbps intensity modulation direct detection(IM/DD) WDM transmission systems, which adopted mid-span spectral inversion(MSSI) as compensation method. We confirmed that the effect of initial frequency chirp on compensation for signal distortion due to a SPM is gradually decreased as a dispersion coefficient of fiber becomes gradually small. But, in the aspect of a compensation for signal distortion due to both SPM and XPM, the effect of initial frequency chirp on compensation is gradually decreased as a dispersion coefficient of fiber becomes gradually large.

• 한국해양공학회지
• /
• 제25권2호
• /
• pp.67-72
• /
• 2011

This study had the goal of investigating the effect of the curvature along the heating line on the transverse angular distortion of plates having an initial curvature from line heating. A thermo-elasto-plastic analysis was carried out using 54 models with various radii of curvature, plate thicknesses, and heating speeds. The results show the effect of the curvature along the heating line on the angular distortion in relation to changes in the magnitudes of the curvature, heating speed, and plate thickness. The present numerical results show that the time history of the angular distortion after cooling and reaching the final deformed shape for a plate having an initial curvature is quite different from that of a flat plate. This emphasized the importance of considering the curvature effect on the transverse angular distortion. From the viewpoint of the curvature effect on the deformation, it has been seen that the curvature does not affect the transverse shrinkage. In this study the predicting formula for the transverse angular distortion was derived through a regression analysis. It showed that as the curvature increased, the angular distortion was reduced because of the higher bending rigidity at the same heat input parameter, and the peak points moved toward the origin as the curvature increased.

• 한국멀티미디어학회논문지
• /
• 제10권11호
• /
• pp.1439-1445
• /
• 2007

본 논문에서는 기존의 PDE방법의 계산량을 줄이고 동시에 동일한 예측화질을 얻기 위해, 초기 매칭블록의 서브블록별 SAD값의 비교를 통한 고속 움직임 예측 알고리즘을 제안한다. 제안한 방법은 최초 매칭 블록의 서브블록별 매칭 에러의 복잡도의 비교를 통해 후보블록들의 매칭순서를 변경하여 불필요한 계산량을 줄이는 방법을 제안한다. 제안한 알고리즘은 예측 화질의 저하 없이 기존의 PDE(partial distortion elimination) 알고리즘을 이용한 전영역 탐색 방법에 비해 45%의 계산량을 줄였으며, MPEG-2 및 MPEG-4 AVC를 이용하는 비디오 압축 응용분야에 유용하게 사용될 수 있을 것이다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2010년도 춘계학술발표대회 초록집
• /
• pp.58-58
• /
• 2010

The purpose of this study is to evaluate the structural safety at the topside weldment of hull structure, which was welded after launching. For it, the variations of residual stress and distortion at the topside weldment with loading conditions such as hull girder hogging bending moment after launching and free initial loading state was evaluated by using FEA. And the maximum stress range at the weldment under design loads specified by classification society was evaluated by FEA. In this case, the residual stress and welding distortion at the topside weldment was assumed to be initial imperfection. In accordance with FEA results, regardless of initial loading condition, tensile residual stress was found. However, the residual stress and welding distortion at the topside weldment produced under hogging condition was less than those of topside weldment under free loading state. That is, the amount of residual stress at the topside weldment decreased with an increase in the amount of tension load caused by hogging condition. It was because the compressive thermal strain at the topside weldment produced during welding was reduced by tensile load. However, the maximum stress range at the topside weldment under maximum hull girder bending moment was almost similar regardless of initial loading condition. So, if the problem related to the soundness of weldment is not introduced by initial load, the effect of initial loading condition during welding on fatigue strength of topside weldment could be negligible.

• Journal of Welding and Joining
• /
• 제32권1호
• /
• pp.79-86
• /
• 2014

The purpose of this study is to determine the proper fillet weld size for the stiffeners on hull bottom plate of crude oil tanker. To achieve it, the effective notch stress and hot spot stress of the fillet weld with leg length specified in the rule were evaluated by using comprehensive FE analyses. Based on the results, the fatigue damages at each location of weld were calculated. Meanwhile the transitional behavior of initial welding distortion in the hull bottom plate under the design conditions was investigated by using a non-linear FEA. Welding distortion and residual stress introduced during fabrication process were considered as initial imperfections. According to FE analysis results, if the fillet leg length satisfies the design criteria of the classification society, the concern on the root failure at the fillet welds in the bottom hull plate during the design life can be negligible. In addition, considering the transitional behavior of the distortion during the service life, the fillet leg length should be minimized.

• 말소리와 음성과학
• /
• 제5권1호
• /
• pp.47-54
• /
• 2013

The aim of this study was to analyze consonant articulation errors produced by 90 speakers with cerebral palsy (CP). Phonetic transcriptions were made for 37 single-word utterances containing 70 phonemes: 48 initial consonants and 22 final consonants. Errors of substitution, omission, and distortion were analyzed using a confusion matrix paradigm showing the visualization of error patterns. Results showed that substitution errors in initial and final consonants were most frequent, followed by omission and distortion. Consonant omission occurred more frequently on final consonants. In both initial and final consonants, the within-place errors were more prominent than the within-manner errors. The current results suggest that consonant confusion matrices for dysarthric speech may provide useful information for evaluating speech intelligibility and developing automatic speech recognition system of adults with CP associated dysarthria.

• Journal of Magnetics
• /
• 제22권2호
• /
• pp.257-265
• /
• 2017

This paper presents a 2-D analytical method to calculate the back EMF of the axial flux permanent magnet synchronous generator (AFPMSG) with coreless stator and dual rotor having magnets mounted on both sides of rotor yoke. Furthermore, in order to reduce the no load voltage total harmonics distortion (VTHD), the initial model of the coreless AFPMSG is optimized by using a developed analytical method. Optimization using the 2-D analytical method reduces the optimization time to less than a minute. The back EMF obtained by using the 2-D analytical method is verified by a time stepped 3-D finite element analysis (FEA) for both the initial and optimized model. Finally, the VTHD, output torque and torque ripples of both the initial and optimized models are compared with 3D-FEA. The result shows that the optimized model reduces the VTHD and torque ripples as compared to the initial model. Furthermore, the result also shows that output torque increases as the result of the optimization.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -1
• /
• pp.421-424
• /
• 2000

In this paper, we propose a window warping method to solve stereo matching problems in projective distortion region. Because the projective distortion region cant t be estimated with fixed-size block matching algorithm, we use the window warping technique in block matching process. The position of a reference window to resample is obtained adaptively according to the degree of reliability in disparity estimated previously. The initial disparity and reliability are obtained by applying a well known hierarchical strategy. The experimental result shows that considerable improvement is obtained in the projective distortion region.

• 한국지능시스템학회논문지
• /
• 제18권3호
• /
• pp.354-359
• /
• 2008

클러스터링은 주어진 임의의 데이터 중에서 유사한 성질을 지닌 데이터를 복수개의 그룹으로 조직화하는 기법이다. 이를 위해 K-Means, Fuzzy C-Means(FCM), Mountain Method(MM) 등과 같은 많은 기법들이 제안되었고 또한 널리 사용되어지고 있다. 그러나 이러한 기법들은 초기값에 따라 클러스터링 결과가 크게 달라지는 단점이 있다. 특히 가장 널리 사용되는 FCM 기법은 잡음 데이터에 취약하며, 주어진 입력 데이터의 클러스터 내부분산을 최소화 하는 방법을 사용하기 때문에 클러스터링 중심의 왜곡 현상이 발생한다. 본 논문에서는 데이터 가중치에 근거한 비례적 근접데이터 병합을 통하여 클러스터 중심 왜곡을 저감하며 초기값에 영향을 받지 않는 클러스터링 기법을 제안한다. 그리고 FCM으로 얻어진 클러스터 중심과 제안기법을 적용하여 얻어진 클러스터 중심에 대한 비교 검토를 통하여 제안기법의 효용성을 확인한다.

• 전자공학회논문지A
• /
• 제32A권3호
• /
• pp.10-17
• /
• 1995

this thesis proposes a new echo canceller that can be used in a fulll-duplex digital subscriber loopmodem. The modem suffers from nonlinear distortion such as transmitted pulse asymmetry, saturation in transformers, and nonlinearity of data converters. The proposed nonlinear echo canceller can compensate the nolinear distortion by using a nonlinear digital filter based on canonical pieceewise-linear (CPWL) function. Numerical results based on computer simulation are given in this paper. It is shown that the convergence characteristics depend on the initial values of weights of linear filters with absoluters and that the nonlinearity in digital-to-analog(D/A) converter can be compensated by a relatively small number linear filters with absoluters. It is also shown that the proposed algorithm has a faster convergence rate in comparison with Voterra algorithm.