• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.2
• /
• pp.1-8
• /
• 2004

A cylindrical constant volume combustion chamber was used to investigate the exhaust emission characteristics of homogeneous charge, stratified pattern and inhomogeneous charge under various conditions using gas chromatography. In the case of homogeneous charge condition, the $CO_2$ concentration is proportional to excess air ratio and overall charge pressure, the $CO_2$ concentration is proportional to excess air ratio and the UHC concentration is inversely proportional to ignition time and overall charge pressure. In the case of stratified pattern, the RI(rich injection) condition shows better exhaust emission characteristics, especially $CO_2$, than that of HI (homogeneous injection) or LI (lean injection) conditions. In inhomogeneous charge conditions, when initial charge pressure is increased, $CO_2$ and UHC concentration is reduced but $O_2$ concentration is increased. And when the excess air ratio of initial charge mixture is 3.0, UHC and $CO_2$concentration show lowest values.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.51-52
• /
• 2006

This study was progressed on the freezing behavior of waste water in relation to freeze concentration method useful to waste water treatment system of small and middle size and which can re-use purified water. The object of this experiment is comparing a pollutant contain of the frozen layer and of an aqueous solution by cooling wall temperature, a flow field effect and a initial thickness of frozen layer.

• Korean Journal of Food Science and Technology
• /
• v.47 no.4
• /
• pp.431-437
• /
• 2015

In this study, high-acidity cider vinegar (HACV) was produced by alcoholic and acetic acid fermentation of apple concentrate without any nutrients and then the optimum alcohol concentration was determined through a qualitative study. HACV was fermented with different initial alcohol concentrations (6-9%) during the process of acetic acid fermentation. The highest content of reducing sugar, organic acids, and free amino acids was observed at 6% of initial alcohol concentration. Approximately 20 types of volatile compounds were identified by solid-phase microextraction (SPME) and GC-MS. The total volatile content was the highest at 6% of initial alcohol concentration, and the acid content was the lowest at 9% of the initial alcohol concentration. The HACV produced by a two-stage fermentation process was qualitatively better than commercial HACV presenting the highest value at 6% of initial alcohol concentration. Malic acid, aspartic acid, and hexyl acetate were selected as quality index components of HACV production by two-stage fermentation on the basis of correlation between their physicochemical properties and the sensory attributes of HACV.

• Nuclear Engineering and Technology
• /
• v.27 no.5
• /
• pp.775-783
• /
• 1995

This study is to assess the effects of increasing wall thickness on the safety margin of pressure tube in operating and of lowering initial hydrogen concentration on the DHC growth in respect to the improvement of the reliability of pressure tube in CANDU reactors. The pressure tube with thicker wall of 5.2 mm shows much higher safety margin for flaw tolerance by 25％ than the current 4.2mmm tube. The thicker pressure tubes have a great benefit in LBB assessment including the initial crack depth at which DHC occurs, the crack length at onset of leaking and the available time for action. The resistance for the pressure tube ballooning at LOCA accident is also increased with the thicker tube. The calculations for Heq concentration after 20 years of operation as a function of wall thickness and initial hydrogen concentration show that the 5.2 mm nil thickness tube with 5 ppm initial hydrogen concentration is the most resistant to DHC. with the lower initial hydrogen concentration, TSS temperature for the precipitation or hydride decreases and the crack growth during cooldown reduces.

• KSBB Journal
• /
• v.8 no.2
• /
• pp.178-184
• /
• 1993

Extractive fermentations with the extract of Jerusalem artichoke in an aqueous-two-phase-system of polyethyleneglycol(PEG) and dextran(Dx) were investigated to obtain the effects of composition of PEG and Dx on both fermentation ,characteristics and partition ratio of alcohol. The specific growth rate of K. Fraglis CBS 1555 increased with a decrease of concentration of PEG and Dx. It augmented along with concentration of initial sugar up to 80g/l but decreased thereafter. The specific production rate of alcohol showed a rising tendency up to 100g/lof initial sugar, whereafter represented a decreasing trend. The partition ratio of alcohol between two phases augmented according to decrease of Dx comic. and increase of PEG cone. regardless of initial sugar concentrations. The ratio, however, decreased with Increment of initial sugar concentration at constant composition of PEG and Dx. The partition coefficient of alcohol had an ascending effect to the increase of PEG cone, but it had little effect on the changes of concentrations of Dx and initial sugar. The present study suggests that the optimum composition of PEG and Dx in the aqueous-two-phase-system by extractive fermentation were around 6.5%(w/v) of PEG and 3%(w/v) of Dx in considerations of emulsion state, sedimentation and separation of two phases, alcohol partition ratio, and specific growth rate.

• Journal of Korean Society on Water Environment
• /
• v.31 no.6
• /
• pp.619-624
• /
• 2015

This study experimentally determined the effect of titanium tetrachloride (TiCl₄) concentration ([TiCl₄]) (0.25-0.55 mM) and initial pH (3-11) on phosphorus (P) removal in synthetic wastewater (2 mg P/L). The P removal efficiency increased when [TiCl₄] increased. The P removal efficiency showed a parabolic trend with an inflection point at pH 7. At the molar ratio of TiCl₄ and P>6.2, the P removal efficiency was over 90% and the residual P concentration was less than 0.2 mg/L. Within the design boundaries, the complete P removal could be achieved at 7.0≤initial pH≤8.5 and 0.43≤[TiCl₄]≤0.55 mM. The final pH was over 5.8 at initial pH≥7.7 and [TiCl₄]≥0.35 mM. The results showed that TiCl4 was effective in P removal in water so that it could be an alternative chemical for P removal.

• Journal of Korean Society on Water Environment
• /
• v.25 no.6
• /
• pp.943-950
• /
• 2009

Cadmium (Cd) adsorption onto the activated carbon containing hydroxyapatite (HAP) was investigated in batch experiments and response surface methodology (RSM) using the Box-Behnken methods were applied to the experimental results. Cd adsorption with different HAP mass ratio of from 10% to 30%. With more HAP, Cd was more adsorbed. These results suggest that the higher HAP mass causes an increase of the ion exchange potential of the HAP sorbent. Equilibrium experimental results from Cd adsorption was fitted to Langmuir and Freundlich isotherm models. Cd adsorption on HAP sorbent were found to follow the Freundlich isotherm model well in the initial adsorbate concentration range. Also, Cd adsorption was a function of the HAP mass ratio ($x_1$), initial Cd concentration ($x_2$), and initial pH ($x_3$) from the application of the RSM. Statistical results showed the order of significance of the independent variables to be initial Cd concentration > HAP mass ratio > initial pH.

• Journal of Applied Biological Chemistry
• /
• v.44 no.4
• /
• pp.194-198
• /
• 2001

Contaminated sites are often abandoned for an extended period of time, thus organopollutants becoming sequestered. The information on the initial concentrations of the contaminants would be helpful for the economic bioremediation of the chemicals. The present study estimated the initial concentrations of atrazine and phenanthrene through multiple regression analyses using soil properties and the amount of chemicals available in situ. Percentage mineralized or extracted was best correlated with organic C or logarithm of organic C, and the $R^2$ values were 0.548 and 0.894 for atrazine and phenanthrene, respectively. Estimation of the initial concentration of the chemicals was then calculated from both the percentage mineralized or extracted and the amount of chemicals extracted or mineralized. Results showed that the estimation of the initial concentration of the chemical at the time of contamination is feasible.

• Journal of Korean Society on Water Environment
• /
• v.22 no.4
• /
• pp.585-589
• /
• 2006

Comparison between photocatalysis and sonophotocatalysis were performed in lab-scale experiments for the treatment of benomyl. The effect of operational parameters, i.e., initial benomyl concentration, $TiO_2$ concentration, $H_2O_2$ concentration on the degradation rate of aqueous solution of benomyl has been examined. The optimal conditions for photocatalysis and sonophotocatalysis processes were determined: initial Benomyl concentration was 3 mg/L, the concentration of $TiO_2$ was 2 g/L and $H_2O_2$concentration was 1.5 mM. Under the optimal conditions, sonophotocatalysis was effective for inducing faster degradation of the benomyl.

• Journal of Korean Society of Water and Wastewater
• /
• v.28 no.5
• /
• pp.581-587
• /
• 2014

Sediment basin that is typical facility installed for development business to prevent soil erosion has low removal efficiency and therefore, it causes complaints from the residents and has a bad effect on ecosystem. Thus there is a limit to control soil erosion using the existing design methods of sediment basin, so the purposes of this study is providing suitable design factors for sediment basin with regarding soil characteristic of development areas and analysing sedimentation characteristic by inflow concentration changes. The results, for analyzing the sedimentation characteristic by soil concentrations within approximately 2,000 ~ 20,000 mg/L of initial SS concentration, indicated similar sedimentation trends for same soil in the supernatant regardless of initial concentrations. However, for different soil characteristic (percent finer), there are different results in sedimentation rate and concentrations of the supernatant. Thus it is recommended that sediment basin to prevent soil erosion during construction should be designed based on retention time derived from soil sedimentation experiments regardless of inlet concentration. In addition, installing the soil erosion prevention facility at the back to satisfy effluent water quality should be considered to minimize soil erosion effectively.