• 아시안잔디학회지
• /
• 제11권2호
• /
• pp.117-124
• /
• 1997

This study was carried out to investigate the growth and branching pattern of stolons at Korean lawn(Zoysia japonica Steud.) in the field condition. The results were summarized as follows ; 1.About 80% of observed lawns had one primary stolon. Among the lawns with several primary stolons, 30% of them had two primary stolons, 63% had three, and 7% had four. 2.The angles between the primary stolon and the shoot were increased from 0˚ to 52˚ according to the node order from the terminal shoot apex, and reached maximum angle at the 7th node. 3.The internode length was the longest in the middle position of stolon, and its growing rate which depends on months was increased from May to September. 4.The branching angles between primary and secondary stolon were from 44˚ to 53˚ in each node. The average left branching angle was about 48.20, right branching angle 47.8˚, and the total average branching angle was 48.00. 5.The rate of initial brabch was the highest at the 10th node in May, the 7th node in July and the 5th node in September. But, the initial branching rate at the 7th node in July was higher than any other that at the 10th node in May and the 5th node in September. 6.The distribution rate of secondary stolon in each node of primary stolon was the highest at the 7th node. 7.when the terminal shoot apex of primary stolon was damaged mechanically, the branching rate at the first node after the damaged region was highly increased to 62%. The results of this study may be suggested that the secondary stolon begins to branch with the angle of 480 from the 7th node of the normal primary stolon, and those may be used as a basic data for the branching simulation in lawn.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제37회 하계학술대회 초록집
• /
• pp.188-188
• /
• 2009

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1998년도 추계 학술대회논문집
• /
• pp.204-210
• /
• 1998

A method is developed to include the effect of volume expansion in the description of the flame dynamics using G-equation. Line volume-source is used to represent the effect of the exothermic process of combustion with source strength determined by the density difference between the burned and the unburned region. Volume expansion adjusts the flow field to accommodate the increased volume flow rate crossing the flame front. Test result predicted the measured velocity field qualitatively. The method was applied to study the interaction of vortex and premixed flame. Increased volume expansion did not change the initial growth rate of flame area. However, the residence time and flame surface area increased with higher expansion ratios.

• Bulletin of the Korean Chemical Society
• /
• 제31권9호
• /
• pp.2575-2580
• /
• 2010

We present a method for chemically reducing silver alkylcarbamate complex with hydrazine to synthesize silver nanocolloids in an organic solvent using polyvinylpyrrolidone (PVP) as the stabilizer. To determine the optimal conditions for preparing stable silver colloids of controlled size and shape, the silver 2-ethylhexylcarbamate (Ag-EHCB) complex, PVP, hydrazine, and 2-propanol solvent concentrations in the reaction mixture were varied. The initial colloid has a mean particle diameter of 5-80 nm, and it exhibits an absorption band with various shapes in the UV region with a maximum near 420 nm. UV-vis spectroscopy, TEM, and X-ray diffraction techniques were used to investigate the formation and growth process of the metallic silver nanocolloids.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.173-173
• /
• 1999

The initial growth mode of Nb on Ag(110) in sub-monolayer region is studied using Scanning Tunneling microscopy. E-beam evaporated Nb is deposited onto the substrate at RT, and STM measurements are carried out at RT and 78K. With Nb being immiscible in bulk Ag, 3D islands formation begins at early stage and no particular ordered structure is found. At very low coverages, however, many interesting phenomena are observed in association with Nb clusters. Small Nb clusters as deposited displays very strong size dependence against atom-manipulation by the STM tip. In addition, the apparent corrugation of clusters below the critical size exhibits dramatic dependence on the imaging bias, disappearing completely over a wide range of the bias. Possible physical mechanism responsible for such behavior will be discussed.

• 대한기계학회논문집B
• /
• 제22권12호
• /
• pp.1669-1680
• /
• 1998

A method is developed to include the effect of volume expansion in the description of the flame dynamics using G-equation. Line volume-source is used to represent the effect of the exothermic process of combustion with source strength assigned by the density difference between the burned and the unburned region. The present model provides good agreement with the experimental results. Including volume expansion, the flow field is adjusted to accommodate the increased volume flow rate which crossing the flame front and the result predicts the same behavior of measured velocity field qualitatively. The effect of increasing volume expansion does not change the initial growth rate of flame area but increase the residence time. Consequently this effect increases the maximum area of flame front. The flame propagation in varying flow field due to volume expansion provides a promising way to represent the wrinkled turbulent premixed flames in a numerically efficient manner.

• 한국분말재료학회지
• /
• 제2권1호
• /
• pp.53-62
• /
• 1995

TLP(Transient-Liquid-Phase) bonding of Fe-base MA956 ODS alloy was performed. As insert metal a commercially available Ni-base alloy(MBF50) and an MA956 alloy with additive elements of 7wt% Si and 1wt% B were used. To confirm the idea that a concurrent use of MA956 powder with Insert metals can enhance the homogenization of constituent elements and thereby reduce the thickness of joint interface, MA956 powder was also inserted In a form of sheet. SEM observation and EDS analysis revealed that Cr-rich phase was formed in the bonded interface in initial stage of isothermal solidification during the bonding process, irrespective of kind of insert metals. Measurement of hardeness in the region of bonded interface and EDS analysis showed that a complete homogenization of composition could not be obtained especially in case of MBF50. Joints using either BSi insert metals only or BSi insert together with MA956 powder interlayer showed, however, a remarkable improvement in a compositional homogenization, even though a rapid grain growth in the bonded interface could not be hindered.

• 한국교육학연구
• /
• 제23권2호
• /
• pp.5-30
• /
• 2017

본 연구에서는 해외 교환학생 프로그램에 참여한 한국 대학생들을 대상으로 참여 이전과 참여 종료 및 귀국 이후까지 3시점에 걸쳐 수집한 자료를 사용하여 외국어 능력, 문화적 능력, 개인적 발달에 대한 참여 효과를 분석하였다. 구체적으로, 위계선형모형(hierarchical linear model)을 사용하여 시간에 따른 참여 효과의 변화 유무와 예측 변수들을 살펴보았다. 무조건모형 분석 결과, 외국어 능력, 문화적 능력, 개인적 발달 모두에 대해 해외 교환학생 프로그램 참여 이전인 초기치와 변화율의 개인차 존재를 확인하였다. 조건모형 분석 결과, 초기치에 대해 외국어 능력은 부모 학력과 대학 전 해외경험, 문화적 능력은 성별과 대학 전 해외경험, 개인적 발달도 성별과 대학 전 해외경험이 유의미한 영향을 미치는 것으로 나타났다. 변화율에 대해서는 외국어 능력은 대학 전 해외경험과 파견 국가 및 지역, 문화적 능력은 참여자와 현지 학생 간 교류 정도, 개인적 발달은 대학 전 해외경험이 유의미한 영향을 미치는 것으로 나타났다. 마지막으로 이와 관련한 논의와 시사점을 제시하였다.

• KSBB Journal
• /
• 제5권1호
• /
• pp.75-80
• /
• 1990

돼지감자 착즙의 당농도를 50,80,110,190,250g/l로 하고 K.marxianus의 비증식속도,균체수율,알콜수율등을 발효액주으이 생성알콜농도및 당 소모량의 함수로 구명한 결과 다음의 결론을 얻었다. 생성알콜농도에 대한 비증식속도 및 알콜의 비생성속도의 함수관계는 알콜생성량이 낮을때 선형 함수관계를, 알콜생성량이 높을때는 지수 함수관계를 나타내었다. 균체의 증식은 생성알콜농도가 50g/l이상에서, 그리고 당의 소모량이 100g/l이상에서 잔여 당농도에 무관하게 정지되는 경향을 나타내었다. 비증식속도와 당 소모량사이에는 선형 함수관계를 나타내었으며,알콜 비생성속도와 당소모량사이의 함수관계는 초기당농도가 낮을때 선형 함수관계를 나타내었으나 초기당농도가 높아질수록 지수함수관계로 천이되었다. 균체수율및 알콜수율은 초기당농도에 무관하게 생성알콜농도 25g/l 부근에서 최대치를 나타내었으며, 알콜생성량이 증가함에 따라 초기 당농도가 증가할수록 완만하게 감소하였다. 이상의 함수관계로부터 K.marxianus의 알콜발효에 있어 한계 당농도는 110g/l근방으로, 한계 알콜농도는 50g/l근방인 것으로 추정되었다.

• 전기화학회지
• /
• 제7권3호
• /
• pp.131-137
• /
• 2004

Sol-gel method which provides better electrochemical and physiochemical properties compared to the solid-state method was used to synthesize the material of $LiFe_yMn_{2-y}O_4$. Fe was substituted to increase the structural stability so that the effects of the substitution amount and sintering temperature were analyzed. XRD was used for the structural analysis of produced material, which in turn, showed the same cubic spinel structure as $LiMn_2O_4$ despite the substitution of $Fe^{3+}$. During the synthesis of $LiFe_yMn_{2-y}O_4$, as the sintering temperature and the doping amount of Fe(y=0.05, 0.1, 0.2)were increased, grain growth proceeded which in turn, showed a high crystalline and a large grain size, certain morphology with narrow specific surface area and large pore volume distribution was observed. In order to examine the ability for the practical use of the battery, charge-discharge tests were undertaken. When the substitution amount of $Fe^{3+}\;into\;LiMn_2O_4$ increased, the initial discharge capacity showed a tendency to decrease within the region of $3.0\~4.2V$ but when charge-discharge processes were repeated, other capacity maintenance properties turned out to be outstanding. In addition, when the sintering temperature was $800\~850^{\circ}C$, the initial capacity was small but showed very stable cycle performance. According to EVS(electrochemical voltage spectroscopy) test, $LiFe_yMn_{2-y}O_4(y=0,\;0.05,\;0.1,\;0.2)$ showed two plateau region and the typical peaks of manganese spinel structure when the substitution amount of $Fe^{3+}$ increased, the peak value at about 4.15V during the charge-discharge process showed a tendency to decrease. From the previous results, the local distortion due to the biphase within the region near 4.15V during the lithium extraction gave a phase transition to a more suitable single phase. When the transition was derived, the discharge capacity decreased. However the cycle performance showed an outstanding result.