• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2010년도 정기 학술대회
• /
• pp.238-241
• /
• 2010

This paper proposed an approach to integrate bridge condition assessment related information with a 3D bridge model to visualize bridge condition assessment information in the 3D bridge model. In this approach, bridge information model plays a centric role in the data access and realizes the integration of bridge initial design and historical bridge maintenance records. Behind the bridge information model is a rational database. After the system requirements for this approach, several IFC data model extensions are suggested.

• 한국주조공학회지
• /
• 제3권2호
• /
• pp.92-99
• /
• 1983

This study has been carried out to investigate into the difference of rolling life and rolling wear characteristics for various gray cast iron under unlubricated dry rolling condition by amsler type wear test with 9.09% sliding.The results obtained from this study are summerized as follows: 1) It has been found that the amount of rolling wear id decreased when tensile strength and hardness are low, and then the rolling life up to generation of abnormal wear is conspicuously increased. 2) At the given condition the amount of rolling wear has been found to decrease as carbon equivalent of gray cast iron increases and resistance of crack propagation is an important factor on improvement of wear characteristics. 3) The amount of rolling wear is increased with increasing rolling revolution and wear of gray cast iron under dry rolling condition is characterized by three modes; initial wear, stationary wear and abnormal wear. 4) It has been found that the amount of rolling wear is increased with increasing maximum compressive stress and extremely increased when maximum compressive stress is over 59.1kg.f/mm.

• Tribology and Lubricants
• /
• 제16권5호
• /
• pp.381-388
• /
• 2000

Boundary lubrication condition arises in most lubricated systems, especially during motion reversals and start up phase of operation. In this work electric contact resistance variations with respect to sliding conditions under lubrication is investigated. The motivation was to improve the understanding of the contact condition in the boundary lubrication regime. It is shown that electrical contact resistance is sensitive to sliding speed and surface condition of the specimens. Also, phenomena such as run-in during the initial phase of sliding and lubricant pile up near the sliding pin could be observed. The results of this work will aid in better understanding of the metal to metal contact condition in lubricated systems.

• 자원리싸이클링
• /
• 제13권6호
• /
• pp.43-48
• /
• 2004

본 연구는 NdFeB 영구자석 폐 스크랩 분말을 600$^{\circ}C$에서 산화배소한 후, 초산을 사용한 약산침출을 수행하여 네오디뮴을 선택적으로 분리하고자 하였다. 산화배소된 스크랩 분말의 초산침출 결과, 네오디뮴의 침출율 90% 이상을 얻기 위한 조건은 반응온도 80$^{\circ}C$, 반응시간 3시간 그리고 광액농도 35%이었다. 초산 침출용액으로부터 분별결정화에 의한 네오디뮴아세테이트 회수 시, 증발후 여액의 네오디뮴 조성은 243 g/l 네오디뮴아세테이트의 초산에 대한 용해도(260 g/l)에 근접하는 것을 알 수 있으며, 침출용액으로부터 네오디뮴아세테이트 결정회수를 위한 최적 조건은 온도 100$^{\circ}C$ 이상에서 초기 침출용액 부피에 대하여 약 1/5 정도 농축하는 것이 적절하였다. 이 때 침출용액 대비 약 67.5%의 네오디뮴을 분리하였으며, 농축여액에 잔존하는 나머지 네오디뮴은 옥살산과 반응시켜 전량 회수할 수 있었다.

• Journal of Biosystems Engineering
• /
• 제43권2호
• /
• pp.110-118
• /
• 2018

Purpose: In this study, the potential for biogas production, degradation rates, and lag-phase of diauxic growth of carbohydrate-based material, which is one of the proximate compositions, were investigated. Methods: This study was conducted using starch as a carbohydrate-based material. In experimental condition 1, the biogas potential of carbohydrate-based material was measured. In experimental condition 2, the effect of feed to microorganism ratio (F/M ratio) on lag-phase of diauxic growth from carbohydrate-based material was tested. Biochemical methane potential tests were performed at five different feed to microorganism ratios (0.2, 0.4, 0.6, 0.8, and 1.0) under mesophilic conditions. The biogas production patterns, lag-phase, total volatile fatty acids to total alkalinity ratio (TVFA/TA ratio), and time required for 90 percent biogas production were used to evaluate biogas production based on the biochemical methane potential tests. Results: In experimental condition 1, unlike previous studies, biogas was produced in the TVFA/TA ratio ranging from 1.131 to 2.029 (approximately 13-19 days). The methane content in the biogas produced from the digesters was 7% on day 9 and increased rapidly until approximately day 27 (approximately 72%). In experimental condition 2, biogas yield was improved when the feed to microorganism ratio exceeded 0.6, with an initial lag-phase. Conclusions: Even if the TVFA/TA ratio was greater than 1.0, the biogas production was processed continuously, and the $CO_2$ content of the biogas production was as high as 60%. The biogas yield was improved when the F/M ratio was increased more than 0.6, but the lag-phase of carbohydrate-based material digestion became longer starting with high organic loading rate. To clarify the problem of the initial lag-phase, our future study will examine the microbial mechanisms during anaerobic digestion.

• 한국건축시공학회지
• /
• 제16권6호
• /
• pp.595-601
• /
• 2016

현재 건축구조물에 사용되는 단열재의 단열성능은 초기성능을 기준으로 설계 시에만 반영하고 있으며, 장기 내구성 저하에 따른 단열성능 감소는 반영되고 있지 않다. 본 연구에서는 가속내구성 시험을 통해 단열재의 내구성 저하에 따른 단열성능 저하를 검토하였다. 연구결과, 발포폴리스티렌 단열재 비드법의 경우 표준환경 조건 및 실험실 가속 시험 조건에서는 경시변화에 따른 성능저하가 나타나지 않았으나, 동결 융해 시험 조건에는 성능이 저하하는 것으로 나타났다. 반면, 압출법의 경우 동결 융해 시험 조건에서는 단열성능 저하가 작았지만, 경시변화 초기에 내부 가스의 방출로 급격한 성능저하를 나타내었다. 또한, 경질 폴리우레탄 폼 단열재의 경우 다른 단열재에 비해 초기 단열성능이 매우 뛰어났으나, 실험실 가속 시험조건 및 동결 융해 시험 조건에서는 성능이 다소 저하하는 것으로 나타났다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.334-334
• /
• 2017

Unstable soil moisture conditions often negatively affect the emergence, seedling establishment, and growth uniformity at the initial stage, and then reduce the grain yield and biomass in direct seeding cultivation for rice in rainfed fields. Therefore it is important to develop a technique to increase the rapid and stabilized seedling establishment and improve the uniformity of initial growth after sowing. This study aims to confirm results on seed priming effect of indoor using petri dish experiments can be reproduced in the field using container at Ghana. Twenty-seven rice varieties including of Oryza sativa L. and O. glaberrima Steud. were used in this study. The experiments using petri dish and container with different soil moisture conditions (5%, 10%, 15%, 20%) were compared. As a result, a significant positive correlation was found between the germination time uniformity in the primed seed of petri dish and emergence time uniformity in the primed seed of container in 10% and 15% soil moisture condition. A significant positive correlation was found between the germination time uniformity in the primed seed of petri dish and plant height in the primed seed of container in 10% soil moisture condition in O. glaberrima. This study concluded that the priming effect in petri dish demonstrate those in container in the field condition of Ghana in 10% and 15% soil moisture condition during seedling stage.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.53-53
• /
• 2017

Unstable soil moisture conditions often negatively affect the emergence, seedling establishment, and growth uniformity at the initial stage, and then reduce the grain yield and biomass in direct seeding cultivation for rice in rainfed fields. Therefore it is important to develop a technique to increase the rapid and stabilized seedling establishment and improve the uniformity of initial growth after sowing. This study aims to confirm results on seed priming effect of indoor using petri dish experiments can be reproduced in the field using container at Ghana. Twenty-seven rice varieties including of Oryza sativa L. and O. glaberrima Steud. were used in this study. The experiments using petri dish and container with different soil moisture conditions (5%, 10%, 15%, 20%) were compared. As a result, a significant positive correlation was found between the germination time uniformity in the primed seed of petri dish and emergence time uniformity in the primed seed of container in 10% and 15% soil moisture condition. A significant positive correlation was found between the germination time uniformity in the primed seed of petri dish and plant height in the primed seed of container in 10% soil moisture condition in O. glaberrima. This study concluded that the priming effect in petri dish demonstrate those in container in the field condition of Ghana in 10% and 15% soil moisture condition during seedling stage.

• 항공우주기술
• /
• 제3권1호
• /
• pp.170-178
• /
• 2004

본 논문은 KSR-III 개발경험을 토대로 모션테이블을 이용한 로켓 6자유도 실시간모의시험(HILS) 방안에 대해 다루고 있다. 모션테이블 HILS 시험을 통해, 3축 모션테이블의 동특성 지연에 따른 제어루프의 안정성을 판단하고 종합 HILS 시험을 위한 기초 자료를 제공하게 된다. 모션테이블 HILS 초기화 시험을 통해, 관성항법장치 초기정렬을 위한 초기자세 각 유지 알고리듬 시험, 발사시작 신호 모사를 통한 시각동기화 시험, 외부기록계를 이용한 실시간 조정시험 등을 수행하게 되고, 개루프 HILS 시험을 통해 정상 상태 비행 상황 및 슬로싱, 벤딩, TWD, 바람, 추력비정렬오차 등의 영향이 존재하는 비행 상황에 대한 모션테이블 운용 시험을 수행하게 되며, 최종적으로 모션테이블 자세각을 궤환루프의 입력으로 궤환시킨 폐루프 HILS를 통해 제어루프의 안정성 시험을 완료하게 된다.

• 청정기술
• /
• 제18권2호
• /
• pp.155-161
• /
• 2012

본 연구의 목적은 분말 사출성형 공정에서 초임계유체를 이용하여 사출성형체로부터 결합제를 효율적으로 제거하는 것이다. 두께 1~2 mm 정도의 얇은 성형체의 경우는 기존의 초임계 추출공정을 이용하여 초기부터 온도, 압력이 높은 조건에서도 아무런 결함 없이 단시간 내에 결합제를 제거할 수 있지만, 시편이 두꺼워질수록 초기에 균열이 발생하기 때문에 일정 공정조건에서는 한계가 있다. 따라서 초기에는 낮은 공정조건에서 시작하여 단계별로 온도와 압력을 상승시키는 초임계 가변 조건 탈지공정을 연구하였다. 두께 1~4 mm의 세라믹 사출성형체 시편을 사용하여 여러 가지 초임계 조건에서 탈지실험을 수행하여 두꺼운 세라믹 사출성형체에 균열이 생기지 않으면서 가장 추출수율이 높은 가변조건 공정의 초기조건을 설정하였다. 이렇게 설정한 초기조건을 시작으로 직경 10 mm, 두께 4 mm의 두꺼운 세라믹 사출성형체 시편을 온도 333.15~343.15 K, 압력 12~27 MPa, $CO_2$ 유량 0.5~1.0 L/min 범위에서 단계별로 상승시켜 최종적으로는 5시간동안 95% 이상의 파라핀 왁스 결합제를 제거할 수 있었다.