• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.475-478
• /
• 2006

Total primary production resulting from the photosynthetic process can be defined as the amount of organic matter produced in a given period of time. It is proportional to the chlorophyll-a (chl-a) values in the surface layer of the ocean. The MODIS board on Aqua satellite measures visible and infrared radiation in 36 wavebands, providing simultaneous images of chl-a concentration and sea surface temperature (SST) in the upper layer of the sea. The seasonal distribution of chl-a concentration during one year from April 2005 to March 2006 was examined. Light has a role of starting the seasonal cycle. The Kuroshio Current in this area induces many oceanographical features affecting to the change of seasonal control. The chl-a concentration is also seasonal, which is low in summer and high in winter. In summer, the meandering of Kuroshio Current induces strong eddies and increases the chl-a concentration. In autumn, the delayed small autumn bloom occurred until last December due to the Kuroshio Current. When the Kuroshio axis moves far from the coast, the coastal water dominates and increases the concentration even in the winter. The spring bloom starts early at the beginning of March and decreases during the spring.

• 설비공학논문집
• /
• 제20권8호
• /
• pp.563-569
• /
• 2008

Radiative, heating is suitable for outdoor heating system in windy and cold seasons. Optimal design of the reflector is very important to maximize heat transfer to a specific target area in the open space. The geometrical optical theory can be applied to analyze efficiency of the reflector. Commercial ray tracing computer programs are available only for limited geometries of the reflector. Alternatively, it may be designed and analyzed through an approximated simple lens theory. Two types of reflectors are analyzed using either of these methods. The key issue in this paper is to propose a new illumination experimental method for determination of the radiative efficiency. Optical light source and illuminometer are employed. The calculated efficiency of the reflector is compared with experimental one for checking the reliability. The relative errors between the experimental and analytical results are less than 5%, which proves the validity of this method. Based on these methodologies, a practical reflector and heating lamp unit is developed.

• 펄프종이기술
• /
• 제40권1호
• /
• pp.23-28
• /
• 2008

Functional hanji was manufactured using the bast fiber of Broussonetia kazinoki and various inorganic compounds such as kaolin, talc, elvan, and ocher, and the physical and optical properties were investigated. The residual percentages of kaolin, talc, elvan and ocher in the functional hanji were above 50%. The density of the hanji increased with the increase of the content of inorganic compounds. The hanji manufactured using ocher showed the highest density. The breaking length and burst factor decreased with the increase of inorganic materials, indicating that physical properties of hanji were not improved by adding inorganic materials. The emission rates of far-infrared radiation increased in the hanji manufactured using inorganic materials. The higher emission rates were observed in the hanji with elvan or ocher. Addition of inorganic compounds to hanji showed the flame retardative effect. The colorfastness to light of the hanji with elvan or ocher was the degree of 4, which explained by the characteristic color of the inorganics.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.76.1-76.1
• /
• 2015

Optical resonances of metallic or dielectric nanoantennas enable to effectively convert free-propagating electromagnetic waves to localized electromagnetic fields and vice versa. Plasmonic resonances of metal nanoantennas extremely modify the local density of optical states beyond the optical diffraction limit and thus facilitate highly-efficient light-emitting, nonlinear signal conversion, photovoltaics, and optical trapping. The leaky-mode resonances, or termed Mie resonances, allow dielectric nanoantennas to have a compact size even less than the wavelength scale. The dielectric nanoantennas exhibiting low optical losses and supporting both electric and magnetic resonances provide an alternative to their metallic counterparts. To extend the utility of metal and dielectric nanoantennas in further applications, e.g. metasurfaces and metamaterials, it is required to understand and engineer their scattering characteristics. At first, we characterize resonant plasmonic antenna radiations of a single-crystalline Ag nanowire over a wide spectral range from visible to near infrared regions. Dark-field optical microscope and direct far-field scanning measurements successfully identify the FP resonances and mode matching conditions of the antenna radiation, and reveal the mutual relation between the SPP dispersion and the far-field antenna radiation. Secondly, we perform a systematical study on resonant scattering properties of high-refractive-index dielectric nanoantennas. In this research, we examined Si nanoblock and electron-beam induced deposition (EBID) carbonaceous nanorod structures. Scattering spectra of the transverse-electric (TE) and transverse-magnetic (TM) leaky-mode resonances are measured by dark-field microscope spectroscopy. The leaky-mode resonances result a large scattering cross section approaching the theoretical single-channel scattering limit, and their wide tuning ranges enable vivid structural color generation over the full visible spectrum range from blue to green, yellow, and red. In particular, the lowest-order TM01 mode overcomes the diffraction limit. The finite-difference time-domain method and modal dispersion model successfully reproduce the experimental results.

• 한국방사선학회논문지
• /
• 제14권5호
• /
• pp.695-703
• /
• 2020

의료기술 발전으로 인해 의료기기 사용이 증가하는 추세이다. 의료기기 중 이식 및 치료를 위해 인체 내에 사용되는 경우가 많다. 그러므로 의료기관에서는 감염 예방을 위해 의료기기 형태와 재질에 따른 멸균법들이 다양하게 적용되고 있다. 뼈 이식에서 수산화인화석 재료가 가장 많이 보급되어 있다. 소형 의료기기에 알맞은 비전리방사선 중 고출력에너지를 가진 Q-switch Nd:YAG 레이저를 이용한 멸균법을 제시하고자 한다. 대장균과 충치균을 수산화인화석 디스크에 오염시켜, 출력1.5 W, 파장은 각각 자외선(266, 355 nm), 가시광선(532 nm), 적외선(1,064 nm), 1과 10 펄스를 각각 조사하였다, 본 연구에서 자외선 파장인 1.5 W, 266 nm, 10 pulse에서 멸균력을 가장 이상적으로 보여주었다. 다른 파장대인 적외선, 가시광선은 소극적 멸균력을 보였으며, 자외선 A와 자외선 C는 펄스에 따라 멸균 차이를 보였다. 레이저 멸균에서 파장 및 펄스에 따라 멸균 차이를 알 수 있었다.

• 한국염색가공학회지
• /
• 제22권1호
• /
• pp.71-76
• /
• 2010

In this study the optimum dyeing conditions and blocking effect of UV deodorization efficiency of Ligustrum japonicum Thunb were investigated. Colorants were water-extracted from Ligustrum japonicum Thunb fruit and freeze-drided to obtain colorants powder. The effects of dye concentration, dyeing temperature, dyeing time, and the number of dipping count were studied. Fastness to dry cleaning, rubbing, perspiration, and light were measured according to KS K 0644, KS K 0650, KS K 0715 and KS K 0700, respectively. In order to examine the dyeability according to dyeing conditions, reflectance of fabrics were measured by using UV/VIS spectrophotometer. The bath ratio was 1:20. Dyeing concentration was 100, 200, 300, 400 and 500% on the weight of fiber. Dyeing time was 20, 40, 60, and 80 minutes. Dyeing temperature was 20, 40, 60, 80, and $100^{\circ}C$. The infrared high pressure dying machine was used. As dyeing concentration increased, dye adsorption increased up to 400% and it slowed down. Dye uptake was increased with raising themperature up to $80^{\circ}C$ and it slowed down. Dye adsorption occurred rapidly at first 20 minutes and then it slowed down and reached almost maximum dye uptake at 60 min. Dye uptake increased by repeated dyeing. Therefore, it is considered that optimum dyeing condition is 400%(o.w.f.), $80^{\circ}C$, 60 min. And repeated dyeing improves dye uptake. Color fastness to dry cleaning and rubbing was good, but light fastness and perspiration fastness was not good. Blocking effect of ultraviolet radiation and deodorization efficiency was good.

• The Plant Pathology Journal
• /
• 제38권3호
• /
• pp.212-219
• /
• 2022

Fusarium root rot caused by the soil-borne fungus Fusarium solani is one of the most important fungal diseases of cassava in Thailand, resulting in high yield losses of more than 80%. This study aimed to investigate if the exogenous application of salicylic acid formulations (Zacha) can induce resistance in cassava against Fusarium root rot and observe the biochemical changes in induced cassava leaf tissues through synchrotron radiation based on Fourier-transform infrared (SR-FTIR) microspectroscopy. We demonstrated that the application of Zacha11 prototype formulations could induce resistance against Fusarium root rot in cassava. The in vitro experimental results showed that Zacha11 prototype formulations inhibited the growth of F. solani at approximately 34.83%. Furthermore, a significant reduction in the disease severity of Fusarium root rot disease at 60 days after challenge inoculation was observed in cassava plants treated with Zacha11 at a concentration of 500 ppm (9.0%). Population densities of F. solani were determined at 7 days after inoculation. Treatment of the Zacha11 at a concentration of 500 ppm resulted in reduced populations compared with the distilled water control and differences among treatment means at each assay date. Moreover, the SR-FTIR spectral changes of Zacha11-treated epidermal tissues of leaves had higher integral areas of lipids, lignins, and pectins (1,770-1,700/cm), amide I (1,700-1,600/cm), amide II (1,600-1,500/cm), hemicellulose, lignin (1,300-1,200/cm), and cellulose (1,155/cm). Therefore, alteration in defensive carbohydrates, lipids, and proteins contributed to generate barriers against Fusarium invasion in cassava roots, leading to lower the root rot disease severity.

• 생물환경조절학회지
• /
• 제18권3호
• /
• pp.232-237
• /
• 2009

본 연구는 일반적으로 이용되는 EVA 필름과 비교하여 폴리올레핀(PO), 불소, 방적, 방무, 보온필름 등의 기능성필름이 토마토의 품질에 어떤 영향을 미치는 가를 구명하고자 하였다. 분광투과특성에 있어 자외선은 불소필름이 가장 많았고 PO필름이 가장 적었으며, PAR는 불소, 보온, PO필름 등이 많았으며, 근적외선도 EVA에 비해 기능성필름이 많은 경향이었다. 전체광선의 투과율은 불소, 방무, 방적, PO, 보온, EVA 순으로 높았다. 하우스 내 주간온도는 광투과율 차이에 의해 불소필름이 가장 높고 EVA가 가장 낮았으며, 야간온도는 필름이 두꺼운 방적 및 PO필름이 가장 높게 유지되었다. 기능성필름은 EVA에 비해 과실 당도가 $0.2{\sim}0.5^{\circ}Bx$ 더 높았고, 과실 내 라이코펜 함량이 $15{\sim}30%$ 높게 나타났다. 따라서 토마토의 당도, 라이코펜 함량 등의 품질향상을 위해서는 일반필름 대신에 기능성필름을 이용하는 것이 효과적일 것으로 판단되었다.

• 천문학논총
• /
• 제36권3호
• /
• pp.47-63
• /
• 2021

와이즈/네오와이즈 자료를 사용하여 1형 활동은하핵의 근적외선 장기 변광 특성을 살펴보았다. 활동은하핵은 밀리퀘이사 목록을 사용해 가시광에서의 등급 제한을 두어 선정하였고, 여러 번의 다중시점 측광 자료를 확보하기 위해 황도북극과 황도남극에 가까운 대상으로 한정하였다. 이후 와이즈와 네오와이즈 데이터베이스에서 해당 대상들의 측광 자료를 추출하였다. 일부 근적외선에서 검출되지 않은 경우와 관측 횟수가 지나치게 적은 경우를 제외하고 총 73개의 1형 퀘이사 및 활동은 하핵, 140개의 측광학적으로 선택된 활동은하핵 후보에 대해 W1 (3.4 ㎛), W2 (4.6 ㎛) 밴드 광도곡선을 구성하고 이를 이용해 변광 분석을 수행하였다. 변광 여부를 판단하기 위해 초과 분산 값과 변광의 유의확률 P_var를 계산하였다. 초과 분산이 포아송 오차에 의해 추정되는 오차값보다 큰 경우, 그리고 P_var이 0.95보다 크거나 같은 경우를 변광으로 판단했는데, 활동은하핵 73개 중 19개, 활동은하핵 후보 140개 중 12개가 W1, W2 밴드 모두에서 변광 대상으로 판단되었다. W1 밴드보다 W2 밴드에서 변광 대상으로 판단되는 숫자가 작게 나타났는데, 이는 긴 파장으로 갈수록 변광의 정도가 작아짐을 시사하는 것으로 보인다. 약 9 ~ 26%의 대상들이 근적외선 변광을 보였다. 감쇠 랜덤워크 모형을 사용하여 변광 폭(σ)과 완화 시간(τ), W1과 W2 밴드 사이의 시간 지연 등을 추정하였다. 변광 폭 및 완화시간은 W1 등급과 큰 상관관계를 보이지 않았으며, 두 변수 사이에도 특별히 두드러지는 상관관계가 나타나지 않았다. 단, 감쇠 랜덤워크 모형을 사용해서 시간 규모를 추정할 때 광도곡선의 분량이 충분한지를 감안하면, 완화시간이 짧은 대상들에 대해서는 변광 폭과 완화시간이 음의 상관관계를 보인다고도 볼 수 있다. 대상의 개수가 통계적으로 유의미한 결과를 제시하기에는 부족하다. X선 광도와 변광 특성을 비교했을 때에는 상관관계를 찾아보기 어려웠으나, 앞으로 얻어질 X선 탐사자료와 전천 스펙트럼 탐사자료와 결합한 추가 연구가 기대된다. 전체 대상 중에서는 시간에 따라 (W1-W2) 색이 변하는 것으로 판단되는 흥미로운 대상이 4개가 존재했는데, 이들의 특성에 대해서는 추후 연구가 더 필요할 것으로 전망한다.

• 한국안전학회지
• /
• 제33권5호
• /
• pp.15-20
• /
• 2018

This paper describes the fusing time characteristics of Light PVC Sheathed Circular Cord(VCTF) and Tray Frame Retardant(TFR) cables according to increased temperature under over current condition. The experimental equation will be used to determine the validity and reliability of the test results. The over current flowed 3, 5 and 10 times higher than the amount of allowable current using DC power supply with DAQ(Data Acquisition) measurement system. An infrared radiation heater, which was controlled by a variable AC auto transformer, was used to increase the temperature from room temperature to 50, 100 and 150 degrees Celsius. First, two type of cables were analyzed those with different cross-sectional areas with in the same structure and those with different structures with in the same cross-sectional areas. Then, it was determined how fusing time had been influenced according to the cross-sectional areas and different structures, respectively. The cable resistance was increased by joule heating according to increasing temperature. Therefore, the allowable current of cable is decreased. Finally, the fusing time of the cable was decreased due to increased temperatures at current flow, which were 3 times the amount of allowable current. The instantaneous breakdown was observed when current flow was 5 and 10 times over the amount of allowable current. The fusing time is directly affected by the structure of cable insulation.