• 제목/요약/키워드: Infrared light emitting diode (LED)

검색결과 34건 처리시간 0.022초

LED IT 기반 시스템 센서 네트워크 송수신 모듈 연구 (LED IT-based System sensor network transceiver module research)

  • 장태수;이준명;최정원;김용갑
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2012년도 추계학술대회
    • /
    • pp.11-12
    • /
    • 2012
  • 본 논문에서는 LED(Light Emitting Diode)조명을 통해 기존 사용되는 적외선 센서로 가시광통신의 기술이 효율적으로 송 수신 가능한지 성능 분석을 하기 위한 연구이다. LED는 전기를 빛으로 바꾸는 성질을 이용하여 조명으로 활용한다. LED 조명 통신 융합 원리는 LED와 PD(Photo Diode)의 깜박임 송수신을 기본 원리로 하여 조명 기능을 유지하면서 통신에서 동시에 실현하게 가능하게 한다. LED의 기본 구조 하에 여러 IT 응용기술이 발전하게 되었고, 현재 실생활에 접하게 되었다. LED조명이 있는 곳이라면 어디서나 무선 통신을 할 수 있는 기술을 하고자, 널리 이용되고 있는 PD인 적외선 센서를 활용하여 시스템의 H/W의 초기 값을 ~1m 이상으로 하고 전체 시스템 속도 향상 시킬 수 있는 가시광 데이터 전송 시스템을 이루었다. 사용된 LED모듈이 통신에 가능한지 성능 분석을 하고, 구현된 연구의 LED 및 적외선 센서를 구성하여 예측 및 통신 거리에 대해 나타내고 응용방법과 가능성에 대해 연구하고자 한다.

  • PDF

Monitoring of Environmental Arsenic by Cultures of the Photosynthetic Bacterial Sensor Illuminated with a Near-Infrared Light Emitting Diode Array

  • Maeda, Isamu;Sakurai, Hirokazu;Yoshida, Kazuyuki;Siddiki, Mohammad Shohel Rana;Shimizu, Tokuo;Fukami, Motohiro;Ueda, Shunsaku
    • Journal of Microbiology and Biotechnology
    • /
    • 제21권12호
    • /
    • pp.1306-1311
    • /
    • 2011
  • Recombinant Rhodopseudomonas palustris, harboring the carotenoid-metabolizing gene crtI (CrtIBS), and whose color changes from greenish yellow to red in response to inorganic As(III), was cultured in transparent microplate wells illuminated with a light emitting diode (LED) array. The cells were seen to grow better under near-infrared light, when compared with cells illuminated with blue or green LEDs. The absorbance ratio of 525 to 425 nm after cultivation for 24 h, which reflects red carotenoid accumulation, increased with an increase in As(III) concentrations. The detection limit of cultures illuminated with near-infrared LED was 5 ${\mu}g$/l, which was equivalent to that of cultures in test tubes illuminated with an incandescent lamp. A near-infrared LED array, in combination with a microplate, enabled the simultaneous handling of multiple cultures, including CrtIBS and a control strain, for normalization by the illumination of those with equal photon flux densities. Thus, the introduction of a near-infrared LED array to the assay is advantageous for the monitoring of arsenic in natural water samples that may contain a number of unknown factors and, therefore, need normalization of the reporter event.

Study of Modulation Effect in Integrated Interface Under Controlling Switching Light-Emitting Diode Lighting Module

  • Hong, Geun-Bin;Jang, Tae-Su;Kim, Yong-Kab
    • Transactions on Electrical and Electronic Materials
    • /
    • 제12권6호
    • /
    • pp.253-257
    • /
    • 2011
  • This study was carried out to solve problems such as radio frequency band depletion, confusion risk, and security loss in existing visible wireless communication systems, and to determine the applicability of next-generation networks. A light-emitting diode (LED) light communication system was implemented with a controlling switching light module using the ATmega16 micro-controller. To solve the existing modulation effect and disturbance in visible light communication, an integrated interface was evaluated with a driving light module and analyzes its reception property. A transmitter/receiver using the ATmel's micro-controller, high-intensity white LED-6 modules, and infrared sensor KSM60WLM and visible sensor TSL250RD were designed. An experiment from the initial value of distance to 2.5 m showed 0.46 V of the voltage loss, and if in long distance, external light interference occurred and light intensity was lost by external impact and thus data had to be modified or reset repeatedly. Additionally, when we used 6 modules through the remote controller's lighting dimming, data could be transmitted up to 1.76 m without any errors during the day and up to 2.29 m at night with around 2~3% communication error. If a special optical filter can reduce as much external light as possible in the integrated interface, the LED for lighting communication systems may be applied in next generation networks.

집광된 IR-LED를 이용한 가시광 통신 상향 전송 프로토타입 구현 (Prototype Implementation of VLC Upstream Transmission Using Focused IR-LED)

  • 장윤선;최경묵;주민철;박영일
    • 한국통신학회논문지
    • /
    • 제37C권9호
    • /
    • pp.784-790
    • /
    • 2012
  • 본 논문에서는 가시광 통신(visible light communication: VLC) 상향 전송에서 전송거리 확대를 위한 전송방식을 제안하였다. 이를 위해 집광된 infrared(IR)-light emitting diode(LED)의 출력을 이용하여 조명에 위치한 광수신부에 전송하였다. 이러한 집광을 하는 경우 지향성이 너무 커서 IR-LED를 조명부 수신모듈에 정확히 향하지 않는다면 전송이 어렵게 되는 문제점이 있는데, 이를 해결하기 위해 여러 개의 IR-LED를 조금씩 다른 방향을 향하도록 배치하고, 수신부와 통신을 통해 이 중 최고의 전송성능을 보이는 IR-LED를 선택하는 방법을 제안하였다. 통신 성능을 주기적으로 감시하고, 성능이 저하되면 LED 재검색 과정을 통해 새롭게 최상의 성능을 보이는 LED로 통신을 교체하도록 한다.

가시통신용 LED 드라이버 전력 효율 성능 향상을 위한 연구 (Visible Light Communication LED driver For research to improve power)

  • 권재현;박건준;김효준;최길상;김용갑
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2012년도 추계학술대회
    • /
    • pp.15-16
    • /
    • 2012
  • LED(Light Emitting Diode)는 기존 광원보다 고효율, 저전력, 장수명으로 인해 일반 조명들을 모두 대체될 것으로 전망되며, 또한 기본적으로 반도체 소자이기 때문에 전기에서 빛으로 바꾸는 속도가 매우 빠르며, 이와 같은 특성을 이용하여 고속 ON-OFF 스위칭을 통한 통신 변조를 수행 할 수 있다. 최근에는 이러한 특징을 이용한 가시광 통신(VLC: Visible Light Communication)기술이 주목받고 있으며, 많은 연구가 진행 되고 있다. 본 논문에서는 LED와 가시광 통신을 융합하여 송신부에는 LED 발광소자와 수신부에는 적외선센서를 사용하여, 미디어 신호 전송을 구현하였다. 미디어 전송 속도를 개선하기위해 가시광 통신에 적용되는 기존 가시광 통신용 LED 드라이버의 전력 변환 효율 및 발열 문제를 개선하고자 통신 시스템의 효율 증대를 위해 새로운 방식의 LED 드라이버를 연구하고자 한다.

  • PDF

유비쿼터스 센서 네트워크용 LED 가시광통신 송수신 모듈 및 효율 연구 (A LED Light Communication Transceiver Module for Ubiquitous Sensor Networks)

  • 장태수;권재현;김용갑;박춘배
    • 한국전자통신학회논문지
    • /
    • 제7권6호
    • /
    • pp.1513-1518
    • /
    • 2012
  • 본 논문에서는 PC모듈 기반으로 LED(Light Emitting Diode)의 White조명을 이용한 VLC(Visible Light Communication) 송 수신기 모듈의 미디어 전송 시스템을 구현하고 전송 기술에 대해 성능 분석을 하기 위한 연구이다. LED가시광통신을 실현시키고자 송신부에는 1~12개의 LED발광소자와 수신부에는 가변 센서를 사용 하고자 한다. LED가시광통신을 하고자 개발이 이루어진 송 수신부의 초기 거리 값은 0~1m이상으로 하고 전체 시스템 전송 속도는 수천 kbps를 가지는 가시광 미디어 전송 시스템을 이루었다. 성능 분석을 위해서, PC 모듈에 LED 및 적외선센서를 구성하여 예측 및 통신 거리에 분석하여 응용 방법과 가능성에 대해서 확인하고자 한다. LED 모듈의 전체적인 효율 증가를 위하여 렌즈 착용시와 미착용시 각 성능을 측정하여 약 20%의 효율이 증가하였음을 알 수 있었다.

Conversion of Organic Carbon in Food Processing Wastewater to Photosynthetic Biomass in Photo-bioreactors Using Different Light Sources

  • Suwan, Duangkamon;Chitapornpan, Sukhuma;Honda, Ryo;Chiemchaisri, Wilai;Chiemchaisri, Chart
    • Environmental Engineering Research
    • /
    • 제19권3호
    • /
    • pp.293-298
    • /
    • 2014
  • An anaerobic photosynthetic treatment process utilizing purple non-sulfur photosynthetic bacteria (PNSB) was applied to the recovery of organic carbon from food processing wastewater. PNSB cells, by-product from the treatment, have high nutrition such as proteins and vitamins which are a good alternative for fish feed. Effects of light source on performance of anaerobic photosynthetic process were investigated in this study. Two bench-scale photo-bioreactors were lighted with infrared light emitting diodes (LEDs) and tungsten lamps covered with infrared transmitting filter, respectively, aiming to supply infrared light for photosynthetic bacteria growth. The photo-bioreactors were operated to treat noodle-processing wastewater for 323 days. Hydraulic retention time (HRT) was set as 6 days. Organic removals in the photo-bioreactor lighted with infrared LEDs (91%-95%) was found higher than those in photo-bioreactor with tungsten lamps with filter (79%-83%). Biomass production in a 150 L bench-scale photo-bioreactor was comparable to a 8 L small-scale photo-bioreactor in previous study, due to improvement of light supply efficiency. Application of infrared LEDs could achieve higher treatment performance with advantages in energy efficiency and wavelength specifity.

Design and implementation of optical identification system using visible light and infrared

  • Lee, Seong-Ho
    • 센서학회지
    • /
    • 제30권4호
    • /
    • pp.196-203
    • /
    • 2021
  • In this study, an optical identification system was developed, wherein visible light is used to transmit the interrogating signal, and infrared is used to send the response signal. In the reader, visible light from a light emitting diode (LED) array was modulated via modified pulse width modulation for flicker-free illumination and dimming control. Moreover, the duty factor of the dimming control time was employed to control the illumination from the LED. In the transponder, the spike signal in the output of the high-pass filter was utilized to recover the interrogating signal while preventing interference from the 120-Hz noise from adjacent lighting lamps. The illumination was controlled in 26-86% range of the constant wave LED illumination by changing the duty factor from 20% to 90%. This configuration is advantageous for the construction of optical identification systems for automatic security check and car fare calculation at toll gates or parking facilities.

백색 LED 조사의 상처 수복 효과 (Wound Recovery of Light Irradiation by White LED)

  • 천민우
    • 한국전기전자재료학회논문지
    • /
    • 제24권1호
    • /
    • pp.42-46
    • /
    • 2011
  • Light can be divided into ultraviolet rays, visible rays, and infrared rays depending on the wavelengths. Visible rays with specific wavelength are those predominantly used for would treatment. Especially low level laser irradiates into cells, effectively stimulating cellular tissues and activating cellular function. This study was intended to verify the effect of white LED irradiation therapy on wound recovery in animal tests by applying white LED irradiator, which was independently designed and developed to emit beams of similar wavelength to that of a laser. The designed LED Irradiator was used to find out how white LED light source affected the skin wound of SD-Rat(Sprague-Dawley Rat). We divided the participants into two groups; white LED irradiation group which was irradiated 1 hour a day for 9 consecutive days, and none irradiation group. The results showed that the study group had lower incidence of inflammation and faster recovery, compared with the control group.

Effect of Light Emitting Diode on Growth and Flowering of Oriental Melon (Cucumis melo L. var makuwa Makino)

  • Shin, Y.S.;Lim, Y.S.;Lee, M.J.;Han, Y.Y.;Park, S.D.;Chae, J.H.
    • 한국유기농업학회지
    • /
    • 제19권spc호
    • /
    • pp.203-205
    • /
    • 2011
  • Investigation on oriental melon was carried out for 30 minutes starting at 7 PM every day from March 21 to May 24 to find out the effect of light emitting diode on seedling quality, grafting, growth and flowering of oriental melon. According to the result of the investigation, plant height was longer in Blue, Infrared, Red+Blue and Red treatment and leaf number was higher in Blue, Red+Blue and Infrared treatment than those of control. No big difference was identified between control and Yellow, Green, Ultraviolet treatments. Grafting rate was high in Green, Red+Blue and Green treatment. The number of flower every week in control was nine, the number was almost 1 higher in White and Ultraviolet A treatments, but it was 1 to 4 lower in the rest of treatments. The number of female flowers of control was 10, however, it was 21 in Infrared treatment, 17 in White, 15 in Ultraviolet, 13 in Red+lnfrared, 12 in Blue and Red+Blue, 11 in Yellow and 8 in Green.