• Journal of the Korea Institute of Building Construction
• /
• v.13 no.3
• /
• pp.253-262
• /
• 2013

The test on the mix of PVA fiber of low carbon inorganic composite as a cement substitute found it to be satisfactory in terms of flexibility and stiffness. The result of the evaluation of the properties of low carbon inorganic panel revealed that the absorptivity was low at 8 to 9%, which is lower than the KS value of 25%. Also, the test on non-combustibility and gas toxicity found that these factors satisfied the decision criteria. In the test on heavy metals discharges, Pb, Cd, Cr6+, Hg, and As were not detected. Regarding far-Infrared emissivity and formaldehyde emission, the substitute was found to be harmless to the human body. Therefore, if the issue of shrinkage, which is a disadvantage of inorganic composites, is addressed, it is judged that it is possible to develop a low carbon inorganic composite panel with better performance.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.453-458
• /
• 2001

Analysis of radiation heating system for producing 60" size PDP panels was carried out using $RADCAD^{TM}$ software. Optimum arrangement of infrared heating elements was found to obtain uniform temperature distribution in PDP panel during heating. Heating capacity of each heater was determined to obtain an appropriate maximum panel temperature. Parametric study to find the effect of design parameters such as the thermophysical and optical properties of glass and cooling system was carried out. As a reference system, about 35 kW heating capacity was chosen to obtain about 800 K maximum panel temperature after 30 minute heating. The maximum temperature difference in panel was below 20 K. The maximum/minimum and its difference in the panel were very sensitive to the variation of the emissivity of glass and cooling block.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.7
• /
• pp.59-65
• /
• 1996

A major problem in automation of turning operations is the difficulty in obtaining a sufficient and reliable chip control. Therefore it becomes desirable to find a method which can detect the chip form. Newly born chips in usual metal cutting radiate infrared rays. When such chips run out of cutting point quickly, the radiated energy from the zone around the tool is low compared with that of the case when long tangled chips are staying around the tool. The difference in chip pattern can be detected from the output of pyrometer. But, strictly speaking, only the output of pyrometer does not identify the chip form because that is the removal of chip. Therefore, in this paper, a method of the identification of chip form using output of pyrometer and fuzzy inference is developed.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.3
• /
• pp.296-301
• /
• 2012

This paper describes an analytic method for infrared thermography to detect surface cracks in thin plates. Traditional thermographic method uses the spatial contrast of a thermal field, which is often corrupted by noise in the experiment induced mainly by emissivity variations of target surfaces. This study developed a robust analytic approach to crack detection for thermography using the holomorphic function of a temperature field in thin plate under steady-state thermal conditions. The holomorphic function of a simple temperature field was derived for 2-D heat flow in the plate from Cauchy-Riemann conditions, and applied to define a contour integral that varies depending on the existence and strength of singularity in the domain of integration. It was found that the contour integral at each point of thermal image reduced the noise and temperature variation due to heat conduction, so that it provided a clearer image of the singularity such as cracks.

• Fashion & Textile Research Journal
• /
• v.6 no.6
• /
• pp.803-809
• /
• 2004

In order to activate the characteristics of charcoal in fiber systems, this was carried out to experiment with the particle size from two micrometers to ten micrometers of charcoal powders on cotton fabrics. The results obtained were as follows; The fabrics were dyed with gray colors by charcoal. The K/S values, that were indicative of the dye affinity, became higher as the increase of dyeing temperature, dyeing time, and dyeing concentration. Also it was confirmed the morphology of the fiber surfaces adsorbed with the particle size from two micrometers to four micrometers of charcoal powder by scanning electronmicronscope. The cotton fabrics dyed by charcoals generally recorded 3-4 degree of wash fastness, 4-5 degree of dry-cleaning fastness, 4-5 degree acidic and alkaline perspirations and water fastness. In connection with the functional properties, cotton fabrics dyed with charcoal appeared that antibacterial, deodorization, far infrared emissivity were improved. Especially the deodorization was improved greatly by using charcoal.

• Korean Journal of Remote Sensing
• /
• v.23 no.1
• /
• pp.55-58
• /
• 2007

The prototype radiometric calibration algorithm of the imagers for IR channels has been developed according to the Weinreb's method. Applying the algorithm to the GOES-12 count data, we have shown that the calibration coefficients (slope and intercept) evaluated by the algorithm gives good agreement with the NESDIS's ones, and that the scanning error due to the scan mirror emissivity and stripe error are almost eliminated by the East/West angle dependent scan-mirror correction and the respective calculation of intercept for each North/South scan line, respectively.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.3
• /
• pp.82-88
• /
• 2013

In this project a preliminary experimental research work was done to apply mortars containing magnetite as fine aggregates unto floor finishing materials in order to make indoor environment eco-friendly and to have noiseproof control between floors. Crushed magnetites were substituted as sands in the mix design with a range of 0, 20, 40, 60, 100%. First far-infrared radiation tests to determine emissivity and emission power were done in accordance with the KICM test standard and an outstanding result was obtained. Density and compressive strength test results also showed that as the substitution increases, test values increase in a linear trend. However dry shrinkage test results revealed that as the substitution increases, shrinkage strain also increases. To clearly seek a solution about this problem, more experimental works should be done on oncoming experimental program.

• Korean Journal of Remote Sensing
• /
• v.27 no.6
• /
• pp.653-662
• /
• 2011

Land surface temperature (LST) is a one of the key variables of land surface which can be estimated from geostationary meteorological satellite. In this study, we have developed the three sets of LST retrieval algorithm from MTSAT-2 data through the radiative transfer simulations under various atmospheric profiles (TIGR data), satellite zenith angle, spectral emissivity, and surface lapse rate conditions using MODTRAN 4. The three LST algorithms are daytime, nighttime and total LST algorithms. The weighting method based on the solar zenith angle is developed for the consistent retrieval of LST at the early morning and evening time. The spectral emissivity of two thermal infrared channels is estimated by using vegetation coverage method with land cover map and 15-day normalized vegetation index data. In general, the three LST algorithms well estimated the LST without regard to the satellite zenith angle, water vapour amount, and surface lapse rate. However, the daytime LST algorithm shows a large bias especially for the warm LST (> 300 K) at day time conditions. The night LST algorithm shows a relatively large error for the LST (260 ~ 280K) at the night time conditions. The sensitivity analysis showed that the performance of weighting method is clearly improved regardless of the impacting conditions although the improvements of the weighted LST compared to the total LST are quite different according to the atmospheric and surface lapse rate conditions. The validation results of daytime (nighttime) LST with MODIS LST showed that the correlation coefficients, bias and RMSE are about 0.62~0.93 (0.44~0.83), -1.47~1.53 (-1.80~0.17), and 2.25~4.77 (2.15~4.27), respectively. However, the performance of daytime/nighttime LST algorithms is slightly degraded compared to that of the total LST algorithm.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.275.2-275.2
• /
• 2014

현재 자동차 분야에서 차량 경량화의 한 수단으로 자동차용 유리를 고강도 투명 플라스틱 소재인 Polycarbonate(PC)로 대체하고자 하는 연구가 이루어지고 있다. 하지만, PC의 낮은 내마모 특성과 자외선에 의한 열화 및 변색 현상은 해결하여야 할 문제점으로 지적되고 있으며, 에너지 소비 저감을 위하여 적외선 영역 반사율(reflectance)이 높은 저방사(low emissivity) 특성이 요구되고 있다. 본 연구에서는, ICP-assisted reactive magnetron sputtering 장비를 이용하여 투과율(transmittance)이 확보되고, 고경도 특성을 갖는 Al-Si-N와 300 nm 파장 이하의 자외선 차단 특성이 있는 SiN:H 그리고 저방사 특성을 위해 Al을 증착하였고, 박막의 증착 순서는 SiN:H 박막을 가장 아래에 증착하고 그 위에 Al/Al-Si-N 박막을 다층으로 형성하였다. 박막의 chemical state와 crystallinity를 확인하기 위하여 XPS(X-ray Photoelectron Spectroscopy), XRD (X-ray Diffraction)를 이용하여 분석하였다. Knoop ${\mu}$-hardness tester와 Taber tester를 이용하여 경도 및 내마모 특성을 분석하였다. 제작된 샘플의 Al-Si-N 박막 경도는 Si 비율에 따라 다른 경도 특성을 갖는데, 실제 Si/(Al+Si) 비율이 24%에서 최대 31 GPa의 경도 값을 갖는 것을 확인하였다. UV-Vis Spectrometer를 이용하여 250 nm~700 nm 파장의 투과율을 측정하였고, 자외선 영역의 경우 SiN:H 박막에 의해 300 nm 이하의 파장에서 2% 이하의 투과율을 확인하였다. 그리고 FT-IR(Fourier Transform Infrared Spectroscopy)를 이용하여 $2.5{\mu}m{\sim}15{\mu}m$ 파장의 반사율을 이용하여 방사율을 측정하였는데, 3*(Al/Al-Si-N) 구조의 다층 박막의 경우 방사율은 0.27로 측정되었다.

• Textile Coloration and Finishing
• /
• v.21 no.1
• /
• pp.1-9
• /
• 2009

A lot of research has been made over the recent decade to develop testing packages with antimicrobial properties to improve food safety. In this study, a new method, experimental device and technology for environmental corresponding packages of polypropylene (PP) film has been developed to provide effective temperature buffering during the transport/long-term storage of grains or foodstuffs from the supplier to the market. This quantitatively optimized mixing system enabled to produce PP films with the 700$\sim$1,400d (width;1.5$\sim$3mm, thickness;0.01$\sim$0.5mm). In the whole mixing systems, the finely-granulated inorganic illite and PP virgin chip for master batch (M/B) chip was calculated by digital measurement methods, and then the M/B chip for PP film was adapted through a air jet and PP grinding method. The prepared PP film was characterized with tensile strength and elongation, far infrared radiation (FIR) emissivity, antimicrobial activity and deodorization properties. The results revealed that the two differently grain-sized illite could be show homogeneously dispersed on PP chip surface, and as the increasing of illite content, the FIR emissivity and the anion emission rate of film was increasingly improved. In both of 325 and 1,500 mesh-sized illite contained PP chip, of course the antimicrobial activity was good. But the ultimate deodorization rate for ammonia gas of PP film were found to be approximately the same.