• 한국항행학회논문지
• /
• 제23권6호
• /
• pp.495-500
• /
• 2019

FOD (foreign object debris)는 각종 금속 및 비금속 이물질 및 항공기 운항에 잠재적 위험요소를 가진 물질을 총칭한다. 항공기 이동지역에서 사람이 직접 FOD 탐지 및 수거를 하던 방식은 효율성 및 경제성 또한 매우 낮기 때문에 국내환경에 적합한 FOD 자동 탐지 시스템 개발이 필수적으로 요구된다. 본 논문에서는 한서대학교 태안비행장에서 EO/IR카메라 및 레이더를 이용한 고정형 이물질 자동 탐지 시스템과 이동형 이물질 자동 탐지 시스템을 이용하여 100 m이상 최적탐지시간과 90% 탐지 정확도의 복합운영을 위한 두 시스템의 성능비교 실험 결과이다. 지속적인 연구개발을 통하여 FOD를 무인력으로 수행 할 수 있을것으로 기대된다.

• 한국농공학회논문집
• /
• 제60권6호
• /
• pp.21-31
• /
• 2018

The result of examination of diagnostic method, which is composed of a combination of a thermal camera and a drone that visually shows the temperature of the object by detecting the infrared rays, for detecting the leakage of earth dam was driven in this research. The drone infrared thermography method was suggested to precise safety diagnosis through direct comparing the two method results of electrical resistivity survey and thermal image survey. The important advantage of the thermal leakage detection method was the simplicity of the application, the quickness of the results, and the effectiveness of the work in combination with the existing diagnosis method.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.444-447
• /
• 2003

All objects with some temperature above absolute zero radiate in the infrared. The intensity of the infrared radiated from a object defends on the condition and temperature on the surface of the one. The present, these techniques are frequently adopted into diagnosis for electricity equipments. Simply, however, the applied techniques are passive thermal testing for the detection of loosened terminals and overcurrent. In this paper, a infrared thermal imager was applied to high voltage windings of cast resin transformers, and the accumulated value of the result temperatures was used for evaluating remained lifetime of them. At each aging level, dielectric loss tangent test was carried out. The results offered capabilities for deciding the condition of the transformers suffering difficulties to diagnose.

• 한국측량학회지
• /
• 제38권6호
• /
• pp.635-644
• /
• 2020

딥러닝(DL)을 이용한 객체인식, 탐지 및 분할하는 연구는 여러 분야에서 활용되고 있으며, 주로 영상을 DL 모델의 학습 데이터로 사용하고 있지만, 본 논문은 영상뿐 아니라 공간정보 특성을 포함하는 다양한 학습 데이터(multimodal training data)를 향상된 영역기반 합성곱 신경망(R-CNN)인 Detectron2 모델 학습에 사용하여 객체를 분할하고 건물을 탐지하는 것이 목적이다. 이를 위하여 적외선 항공영상과 라이다 데이터의 내재된 객체의 윤곽 및 통계적 질감정보인 Haralick feature와 같은 여러 특성을 추출하였다. DL 모델의 학습 성능은 데이터의 수량과 특성뿐 아니라 융합방법에 의해 좌우된다. 초기융합(early fusion)과 후기융합(late fusion)의 혼용방식인 하이브리드 융합(hybrid fusion)을 적용한 결과 33%의 건물을 추가적으로 탐지 할 수 있다. 이와 같은 실험 결과는 서로 다른 특성 데이터의 복합적 학습과 융합에 의한 상호보완적 효과를 입증하였다고 판단된다.

• 제어로봇시스템학회논문지
• /
• 제15권4호
• /
• pp.365-371
• /
• 2009

A intelligent mobile hexapod robot with various types of sensors and wireless camera is introduced. We show this mobile robot can detect objects well by combining the results of active sensors and image processing algorithm. First, to detect objects, active sensors such as infrared rays sensors and supersonic waves sensors are employed together and calculates the distance in real time between the object and the robot using sensor's output. The difference between the measured value and calculated value is less than 5%. This paper suggests effective visual detecting system for moving objects with specified color and motion information. The proposed method includes the object extraction and definition process which uses color transformation and AWUPC computation to decide the existence of moving object. We add weighing values to each results from sensors and the camera. Final results are combined to only one value which represents the probability of an object in the limited distance. Sensor fusion technique improves the detection rate at least 7% higher than the technique using individual sensor.

• 한국산업정보학회논문지
• /
• 제27권1호
• /
• pp.11-18
• /
• 2022

주간 및 야간의 보행자 감지를 위해서는 다중 스펙트럼 활용이 필수적이다. 본 논문에서는 교통사고의 위험성이 높은 교차로에서 횡단보도 근처의 보행자를 24시간 검출하기 위해 컬러 카메라 및 열화상 적외선 카메라를 사용하였다. 보행자 탐지를 위해서 YOLO v5 객체 검출기를 사용하였으며 컬러 이미지와 열화상 이미지를 동시에 사용하여 감지 성능을 향상 시켰다. 제안된 시스템은 실제 횡단보도 현장에서 확보한 주·야간 다중 스펙트럼(색상 및 열화상) 보행자 데이터 셋에서 Iou 0.5 기준 0.94 mAP의 높은 성능을 보였다.

• 한국측량학회지
• /
• 제34권6호
• /
• pp.619-627
• /
• 2016

Cells of a PV (photovoltaic) module can suffer defects due to various causes resulting in a loss of power output. As a malfunctioning cell has a higher temperature than adjacent normal cells, it can be easily detected with a thermal infrared sensor. A conventional method of PV cell inspection is to use a hand-held infrared sensor for visual inspection. The main disadvantages of this method, when applied to a large-scale PV power plant, are that it is time-consuming and costly. This paper presents an algorithm for automatically detecting defective PV panels using images captured with a thermal imaging camera from an UAV (unmanned aerial vehicle). The proposed algorithm uses statistical analysis of thermal intensity (surface temperature) characteristics of each PV module to verify the mean intensity and standard deviation of each panel as parameters for fault diagnosis. One of the characteristics of thermal infrared imaging is that the larger the distance between sensor and target, the lower the measured temperature of the object. Consequently, a global detection rule using the mean intensity of all panels in the fault detection algorithm is not applicable. Therefore, a local detection rule was applied to automatically detect defective panels using the mean intensity and standard deviation range of each panel by array. The performance of the proposed algorithm was tested on three sample images; this verified a detection accuracy of defective panels of 97% or higher. In addition, as the proposed algorithm can adjust the range of threshold values for judging malfunction at the array level, the local detection rule is considered better suited for highly sensitive fault detection compared to a global detection rule. In this study, we used a panel area extraction method that we previously developed; fault detection accuracy would be improved if panel area extraction from images was more precise. Furthermore, the proposed algorithm contributes to the development of a maintenance and repair system for large-scale PV power plants, in combination with a geo-referencing algorithm for accurate determination of panel locations using sensor-based orientation parameters and photogrammetry from ground control points.

• 융합보안논문지
• /
• 제22권2호
• /
• pp.21-26
• /
• 2022

마스크 착용은 COVID-19 감염을 예방하기 위한 효과적인 방안이다. 적외선 열화상 기반의 온도 측정과 신원 인식 시스템이 기업에서 널리 사용되고 있는 상황에서 마스크 감지를 위한 연구는 필수적이다. 최근 비전분야에 소개된 MTCNN은 객체 인스턴스 세분화를위한 개념적으로 간단하고 유연하며 일반적인 프레임 워크를 제시한다. 본 논문에서는 열적외선 카메라로부터 획득한 열감지영상에서 발열체인 인스턴스에 대해 발열부위의 세그멘테이션을 생성하는 동시에 이미지 내의 오브젝트 발열부분을 효율적으로 탐색하는 알고리즘을 제안한다. MTCNN(Multi-task Cascaded Convolutional Networks) 기법은 바운딩 박스 인식을 위해 기존 브랜치와 병렬로 객체 마스크를 예측하기 위한 브랜치를 추가한 알고리즘이다. MTCNN은 다른 작업으로 일반화하기 용이하다. 본 논문에서는 MTCNN기반 적외선 열영상 검출알고리즘을 제안하여 RGB영상에서 구별할 수 없는 마스크 착용 여부를 탐지하였다.

• 비파괴검사학회지
• /
• 제37권2호
• /
• pp.91-98
• /
• 2017

Recently, composite materials have been mainly used in the main wings, ailerons, and fuselages of aircraft and rotor blades of helicopters. Composite materials used in rapid moving structures are subject to impact by hail, lightning, and bird strike. Such an impact can destroy fiber tissues in the composite materials as well as deform the composite materials, resulting in various problems such as weakened rigidity of the composite structure and penetration of water into tiny cracks. In this study, experiments were conducted using a 2 kW halogen lamp which is most frequently used as a light source, a 2 kW near-infrared lamp, which is used for heating to a high temperature, and a 6 kW xenon flash lamp which emits a large amount of energy for a moment. CFRP composite sandwich panels using Nomex honeycomb core were used as the specimens. Experiments were carried out under impact damages of 1, 4 and 8 J. It was found that the detection of defects was fast when the xenon flash lamp was used. The detection of damaged regions was excellent when the halogen lamp was used. Furthermore, the near-infrared lamp is an effective technology for showing the surface of a test object.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1413-1416
• /
• 2005

An infrared temperature sensor module developed for the detection of defects in a plate was modified to use in a cylinder. A set of optical fiber leads and a mechanism maintaining sensor-object distance constant were utilized for the modification of the IR sensor module. The detection performance was experimentally investigated, and the measured temperature was also compared with computed temperature distribution. The experimental outcome indicates that the detection of a simulated defect is readily available. The temperature distribution is better for defect detection than that with the previous device. In addition, the measured distribution is comparable to the calculated one using a heat conduction equation. The developed device of defect detection is suitable to be utilized in chemical processes where most of vessels and piping systems are in the shape of a cylinder.