• Korean Chemical Engineering Research
• /
• v.47 no.6
• /
• pp.688-694
• /
• 2009

A spray-type cleaning agent in utilizing dust-remover on PCB was chosen to study the cleanliness test and efficiency. In order to choose alternative environmental-friendly cleaning agents, it is important that the systematic selection procedures should be introduced and applied through the evaluation of their cleaning ability, environmental characteristics, and economical factors, and that the objective and effective evaluation methods of cleanliness should be established for the industry. A novel cleaning evaluation method with scanning electron microscopy/energy-dispersive X-ray analysis of surface observation evaluation method and an infra-red thermography camera(THERMOVISION A20 model) was studied in this work. The sound card(CT-2770 model) cut by $2{\times}2cm$ size was used as a part, and before and after the spray cleaning, the cleanliness was observed by the image analyzer of SEM and further the removal efficiency of dust was quantitatively evaluated by the component analysis of EDX. For the parts of P4TE model motherboard and IPC-A-36 PCB plate, before and after the spray cleaning, temperature differences were measured and compared at room temperature and 50 oven temperature by an infra-red thermography camera in the contaminants of dust and iron powder.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.1579-1580
• /
• 2013

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.7
• /
• pp.557-566
• /
• 2018

In this paper, a vision-based relative navigation system is addressed for autonomous aerial refueling. In the air-to-air refueling, it is assumed that the tanker has the drogue, and the receiver has the probe. To obtain the relative information from the drogue, a vision-based imaging technology by infra-red camera is applied. In this process, the relative information is obtained by using Gaussian Least Squares Differential Correction (GLSDC), and Levenberg-Marquadt(LM), where the drouge geometric information calculated through image processing is used. These two approaches proposed in this paper are analyzed through numerical simulations.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.501-502
• /
• 2015

In this paper, a infra red-camera based wearable keyboard for variable UX(User eXprience) in smart platform was proposed with finger-tracking for anywhere portable devices. This virtual wearable keyboard was designed with OpenCV and MFC for the applying of 'fingertip tracking' and 'k-cuvature' algorithm with 2 IR-cameras.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.3
• /
• pp.46-53
• /
• 2009

To find the working condition is one of the important factors in precision machining. In this study, we analyzed maximum working temperature by infra-red camera and surface roughness in side wall end milling using design of experiment (DOE): RSM(response surface methodology), ANOM(analysis of means) and ANOVA(analysis of variance) by table of orthogonal array. ANOM and ANOVA are well adapted to select sensitivity of design variables for maximum working temperature and surface roughness. The effective design variables and their levels should be determined using ANOM, ANOVA. RSM is presented 2nd order approximation polynomial of maximum working temperature and surface roughness is composed with design variables. Therefore, it is expected that the proposed procedure using design of experiment : table of orthogonal array, ANOM, ANOVA and RSM can be easily utilized to solve the problem of working condition.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2000.11a
• /
• pp.219-225
• /
• 2000

The major movement block of the containers have range between apron and designation points on yard in container terminal. The yard tractor operated by human takes charge of its movement in conventional container terminal. In automated container terminal, AGV(Automated Guided Vehicle) has charge of the yard tractor's role and the navigation path is ordered from upper level control system. The automated container terminal facilities must have the docking system to guide landing line to have high speed travelling and precision positioning. The general method for docking system uses the vision system with CCD camera, infra red, and laser. This paper describes the detection of AGV's position and orientation using laser slit beam to develop docking system.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.371-374
• /
• 2006

Heat transfer characteristic near a sharp fin in a supersonic flow was studied. Infra-red thermography was used to obtain the variation of surface heat transfer coefficient distribution. The attack angle of fin is ranged from $10^{\circ}\;to\;20^{\circ}$ and the oil flow method was also conducted to understand a flow field near a sharp fin.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1999.10a
• /
• pp.309-314
• /
• 1999

The major movement block of the containers is range between apron and designation points on yard in container terminal. The yard tractor operated by human takes charge of it's movement in conventional container terminal. In unmanned container terminal, UCT(unmanned container transporter) has charge of the yard tractor's role and the navigation path is ordered from upper level control system. The unmanned container terminal facilities must have docking system that guided landing line to have high speed travelling and precision positioning in unmanned container terminal. The general method for docking uses the vision system with CCD camera, infra red, and laser. This paper describes the investigation for the developed docking method in view point of merit and demerit and introduces 속 result of developing the docking system with LSB(laser slit beam).

• Journal of Broadcast Engineering
• /
• v.22 no.6
• /
• pp.774-784
• /
• 2017

Occupancy sensors installed in buildings and households turn off the light if the space is vacant. Currently PIR (pyroelectric infra-red) motion sensors have been utilized. Recently, the researches using camera sensors have been carried out in order to overcome the demerit of PIR that can not detect static people. If the tradeoff of cost and performance is satisfied, the camera sensors are expected to replace the current PIRs. In this paper, we propose vision sensor-based occupancy detection being composed of tracking, recognition and detection. Our softeware is designed to meet the real-time processing. In experiments, 14.5fps is achieved at 15fps USB input. Also, the detection accuracy reached 82.0%.

• Journal of Korea Multimedia Society
• /
• v.13 no.1
• /
• pp.66-75
• /
• 2010

We proposed an occupant sensing system using single video camera and ultrasonic sensor for the advanced airbag. To detect the occupant form and the face position in real-time, we used the skin color and motion information. We made the candidate face block image using the threshold value of the color difference signal corresponding to skin color and difference value of current image and previous image of luminance signal to gel motion information. And then it detects the face by the morphology and the labeling. In case of night without color and luminance information, it detects the face by using the threshold value of the luminance signal get by infra-red LED instead of the color difference signal. To evaluate the performance of the proposed occupant detection system, it performed various experiments through the setting of the IEEE camera, ultrasonic sensor, and infra-red LED in vehicle jig.