• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.339-344
• /
• 2016

Since transmissions of large amounts of data are frequent, users require more bandwidth, and the need for communications networks having greater bandwidth is increasing. One communications network satisfying this need is an optical communications network. Therefore, studies to increase the transmission capacity of optical communications systems have been carried out. However, in a general optical communications system, a signal transmitted through optical fiber (a transmission medium) is detected through direct detection in the receiving system. This method has a disadvantage in that the entire bandwidth of the optical signal cannot be utilized. Also, when transmitting an optical signal, there is a problem where the signal-to-noise ratio is affected by neighboring channels. To overcome this situation, various studies are being conducted to minimize the influence of external interference and noise. This paper overcomes the situation by transmitting spectrum-sliced signals using the digital transmission system, FSK. Analyzing the characteristics of the signals detected in the receiver of the optical communications system, Gaussian distribution is used for the PDF of the spectrum-sliced signal, and the signal at the receiving end of the optical communications system is assumed to have a k-square distribution. The results of the analysis confirmed it is better to transmit the spectrally divided signal rather than transmit the laser source.

• KIISE Transactions on Computing Practices
• /
• v.23 no.6
• /
• pp.371-378
• /
• 2017

In modern society, awareness of diabetes is growing with an increase in the elderly population and an increase in the incidence of diabetes. In particular, diabetic patients can suddenly develop hypoglycemic shock; therefore, it is important to measure blood glucose periodically. However, self-monitoring blood glucose meters are difficult to carry and it is difficult to manage the value. To solve these problems, the blood glucose measurement system has been developed as a sensor attached to the body or as one of the functions of smart devices, but it has not been commercialized. In this paper, we propose a smart band with a blood glucose measurement function. If a user enters a schedule to measure blood glucose level, such as before/after meals, in the app, he/she can receive a measurement alarm from the band. The user can measure the blood glucose level at any time using the band, and the measured value is transmitted and managed by the app including behavior history such as before/after meals and the time. This will help the user to manage, diagnose and prevent health problems. The system has been tested using two medical device-certified products, and each blood glucose measurement value has been confirmed to be more accurate.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.9
• /
• pp.16-23
• /
• 2009

In this paper, we propose a new distributed Alamouti space-time block coding scheme using cooperative relay system composed of one source node, three relay nodes and one destination node. The source node is assumed to be equipped with two antennas which respectively use a 2-beam array to communicate with two nodes selected from the three relay nodes. During the first time slot, the two signals which respectively were transmitted by one antenna at the source, are selected by one relay node, added, amplified, and forwarded to the destination. During the second time slot, the other two relay nodes implement the conjugate and minusconjugate operations to the two received signals, respectively, each in turn is amplified and forwarded to the destination node. This transmission scheme represents a new distributed Alamouti space-time block code that can be constructed at the relay-destination channel. Through an equivalent matrix expression of symbols, we analyze the performance of this proposed space-time block code in terms of the chernoff upper bound pairwise error probability (PEP). In addition, we evaluate the effect of the coefficient $\alpha$ ($0{\leq}{\alpha}{\leq}1$) determined by power allocation between the two antennas at the source on the received signal performance. Through computer simulation, we show that the received signals at the three relays have same variance only when the value of $\alpha$ is equal to $\frac{2}{3}$, as a consequence, a better performance is obtained at the destination. These analysis results show that the proposed scheme outperforms conventional proposed schemes in terms of diversity gain, PEP and the complexity of relay nodes.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.5
• /
• pp.95-103
• /
• 2009

An efficient symbol time synchronization scheme for IEEE 802.11n MIMO-OFDM based WLAN systems using cyclic shift diversity (CSD) preamble is proposed. CSD is used to prevent unintentional beamforming when the same preamble signal is transmitted through transmit antennas. However, it is difficult to find a proper starting-point of the OFDM symbol with the conventional algorithms because of time offset by multi-peaks which are result from cross-correlation of received CSD preamble with a known short training symbol. In addition, the performance of symbol time sync. is affected by AGC and packet detection position. In this paper, an optimal symbol time synch. algorithm which is composed of the boundary detection scheme between LTS and OFDM symbols, the verification scheme for enhancement of boundary detection accuracy, and the SNR-varying threshold estimation scheme is proposed. Simulation result show that the proposed algorithm has performance gains of 4.3dB in SNR compared to the conventional algorithms at the rate of 1% sync. failure probability for $2{\times}2$ MIMO-OFDM system and 18dB at 0.1% when maximum frequency offset exists. It also can be applied to $4{\times}4$ MIMO-OFDM system without any modification. Hence, it is very suitable for MIMO-OFDM WLAN systems using CSD preamble.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.2
• /
• pp.9-17
• /
• 2010

Recently, there has been much interest in orthogonal frequency division multiplexing (OFDM) for next generation wireless wideband communication systems. OFDM is a special case of multicarrier transmission, where a single data stream is transmitted over a number of lower-rate subcarriers. One of the main reasons to use OFDM is to increase robustness against frequency-selective fading or narrowband interference. However, in the radio systems it is also important to distortion introduced by high power amplifiers (HPA's) such as solid state power amplifier (SSPA) considered in this paper. Since the signal amplitude of the OFDM system is Rayleigh-distributed, the performance of the OFDM system is significantly degraded by the nonlinearity of the HPA in the OFDM transmitter. In this paper, we propose a canonical piecewise-linear (PWL) model based digital predistorter to prevent signal distortion and spectral re-growth due to the high peak-to-average power ratio (PAPR) of OFDM signal and the nonlinearity of HPA's. Computer simulation on an OFDM system under additive white Gaussian noise (AWGN) channels with QPSK, 16-QAM and 64-QAM modulation schemes and modulator/demodulator implemented with 1024-point FFT/IFFT, demonstrate that the proposed predistorter achieves significant performance improvement by effectively compensating for the nonlinearity introduced by the SSPA.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.8 s.350
• /
• pp.35-46
• /
• 2006

When an RFID reader attempts to read the tags, interference might occur if the neighboring readers also attempt to communicate with the same tag at the same time or the neighboring readers use the same frequency simultaneously. These interferences cause the RFID reader collision. When the RFID reader collision occurs, either the command from the reader cannot be transmitted to the tags or the response of the tags cannot receive to the reader correctly, Therefore, the international standard for RFID and some papers proposed the methods to reduce the reader collision. Among those, Colorwave and Enhanced Colorwave is the reader anti-collision algorithm using the frame slotted ALOHA based a TDM(Time Division Multiplex) and are able to reduce the reader collision because theses change the frame size according to a collision probability. However, these can generate the reader collisions or interrupt the tag reading of other readers because the reader that collides with another reader randomly chooses a new slot in the frame. In this paper, we propose a new RFID reader anti-collision algorithm that each reader monitors the slots in the frame and chooses the slot having the minimum occupation probability when the reader collision occurs. Then we analyze the performance of the proposed algorithm using simulation tool.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.2
• /
• pp.171-178
• /
• 2016

An aircraft in flight and ATC(: Air Traffic Controllers) working in the Ground Control Center carry out a voice communication using the radio. Voice signal to be transmitted from the aircraft is received to a plurality of terrestrial sites around the country at the same time. The ATC receives the various quality of voice signal from the aircraft depending on the distance, speed, weather conditions and adjusted condition of the antenna and the radio. The ATC carries out a voice communication with aircraft in the optimal conditions finding the best voice signal. However, the present system chooses the values of the CD(: Carrier Dectect) which is determined to be superior to, based on the input voice level, as optimal channel. Thus this system can not be seen to select the optimal channel because it doesn't consider the effect of the noise which influences on the communication quality. In this paper, after removing the noise in the voice signal, we could give the digitized information and an improved voice signal quality, so that users can select an optimal channel. By using it, when operating the training eavesdropping system or the aircraft control, we can expect prevention accident and improvement of training performance by selecting the improved quality channel.

• Korean Journal of Biological Psychiatry
• /
• v.16 no.1
• /
• pp.25-36
• /
• 2009

Objectives : The aim of this study was to investigate the association between Korean ADHD patients and the l/s polymorphism of serotonin transporter(5-HTTLPR). Methods : The study sample consisted of 189 Korean ADHD children diagnosed by Kiddie-Schedule for Affective Disorders and Schizophrenia-Present and Lifetime Version-Korean Version(K-SADS-PL), both parents of ADHD children, and 150 normal children. DNA were extracted from the blood of all samples, and genotyping was done. Based on the allele and genotype information, not only the case-control analysis between ADHD and normal children but also the family-based association test among ADHD children and their parents. Transmission disequilibrium test(TDT) were performed for family-based associated test(number of trio=113). The results of the clinical rating and neuropsychological tests were compared according to the l/s genotype of ADHD children. Results : In case-control analysis, there were no statistically significant difference of l/s gene polymorphism between ADHD and normal children in various kinds of analysis condition. In family-based association study, TDT failed to detect linkage disequilibrium between l/s gene polymorphism and ADHD in whole ADHD families. However, in the families of ADHD inattentive type only(number of trio=23), I allele was transmitted more preferentially in the proband with ADHD even if the number of families was small(${\chi}^2$=4.57, p=.032). In the analysis of the results from the clinical scales and neuropsychological tests in ADHD children, the score of the Novelty- Seeking of ADHD children with l/l genotype was significantly lower than with the other genotypes(F=3.15, p=.047), and that of Self Transcendence was significantly higher(F=4.25, p=.017). Conclusion : The results of this study suggest there were no significant genetic association between the 5- HTTLPR gene polymorphism and Korean ADHD.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.1
• /
• pp.171-184
• /
• 2010

In this work, we develop a novel channel power allocation method for the real-time multimedia over the wireless network environment. Since each frame has different effect on the user perceivable QoS, improving packet loss does not necessarily coincide with perceivable improvements in QoS. A new channel power control scheme is suggested based on the quantified importance of each frame in terms of user perceivable QoS. Dynamic programming formulation is used to obtain optimal transmit power which minimizes power consumption and maximizes user perceivable QoS simultaneously. The experiment is performed by using publicly available video clips. The performance is evaluated using network simulator version 2 (NS 2) and decoding engine is embedded at the client node, and calculated PSNR over the every frame transmitted. Through the semantics aware power allocation (SAPA) scheme, significant improvement on the QoS has been verified, which is the result of unequal protection to more important packets. SAPA scheme reduced the loss of I frame by upto 27% and reduced power consumption by upto 19% without degradation on the user perceivable QoS.

• Journal of Digital Contents Society
• /
• v.9 no.4
• /
• pp.661-667
• /
• 2008

The dynamics of business cycles has been changed by the macroscopic economic forces because of the introduction of new technical know-how each year. These the dynamics of business has a significant influence on the investment of enterprise in the information communication field. Today, the most important goal of the IT investment is simply not to lower the production cost any more, but to improve the usefulness for the customers and partners in order to obtain the optimized mass products. Therefore, the enterprises have been concentrating their all abilities on the automation, integration, and optimization of business process using BPM. In addition, they are concentrating their efforts on the business expansion by approaching the technical aspect using RFID application system. However, in order to accomplish a successful enterprise ability, the technical view, business process view, and organization view must be considered together. We suggested the method considering organization view, via the technical element, i.e., RFID system for approaching the business process. Furthermore, we tried the optimization of assignment using Context Analysis methodology and proposed the method to reduce the element with respect to the time, human, and expense by applying the Case Study method that minimizes the iteration times through the transmitted processing procedure and type. The proposed method gave us the expectation that it will bring out the innovative improvement with respect to the time, expense, quality, and customer's satisfaction in the process from the analysis of business process to the analysis and design of system.