• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.208-212
• /
• 2003

2.4GHz wireless LAN has come into wide use at present according as the use of wireless LAN limited to special fields like network of enterprises or universities has been made gradual popularization and the need for it is gathering strength. Therefore, in this paper, transmission devices and structures of it is investigated and optimum transmission level of signals is researched through experiment about characteristics and rate of transmission of Packet signals in various User environments.

• Journal of information and communication convergence engineering
• /
• v.10 no.1
• /
• pp.21-26
• /
• 2012

As the new requirements for wireless sensor networks are emerging, real-time communications is becoming a major research challenge because resource-constrained sensor nodes are not powerful enough to accommodate the complexity of the protocol. In addition, an efficient energy management scheme has naturally been a concern in wireless sensor networks for a long time. However, the existing schemes are limited to meeting one of these two requirements. To address the two factors together, we propose real-time communications with two approaches, a protocol for satisfied conditions and one for unsatisfied. Under the satisfied requirement, existing real-time protocol is employed. On the other hand, for the unsatisfied requirement, the newly developed scheme replaces the existing scheme by adjusting the transmission range of some surplus nodes. By expanding the transmission range, the end-to-end delay is shortened because the number of intermediate nodes decreases. These nodes conserve their energy for real-time communications by avoiding other activities such as sensing, forwarding, and computing. Finally, simulation results are given to demonstrate the feasibility of the proposed scheme in high traffic environments.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.5
• /
• pp.1071-1076
• /
• 2015

This paper proposed an efficient algorithm for tension sensing smart fence system with wireless sensor transmission module installation and alarming services. The wired transmission system demonstrates high accuracy and low latency, but the cost is expensive and transmission error may occur. For these reasons, this paper presented to use wireless transmission communication using Zigbee module technology in order to decrease delay and latency and solve the battery issues.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.05
• /
• pp.171-175
• /
• 1997

We have developed a remote diagnosis system using the LAN and MODEM which enables a routine check for a patient remotely. We used $LabVIEW^{TM}$ as the programing development tool and DAQ (Data Aquisition) board from National Instrument for data aquisition. The LAN card and MODEM are used for the transmission of patient's data. A patient data are aquired by DAQ board and signal processing is done by $LabVIEW^{TM}$, which is a graphical prgamming language. Two methods for the data of transmission. One is the Client-Server model using TCP/IP (Transmission Control Protocol / Internet Address) in the LAN (Local Area Network) Another is using MODEM to transmit the measured data from a patient. In this case, the data transmission is accomplished by the FTP (File Transfer Protocol).

• Journal of information and communication convergence engineering
• /
• v.1 no.4
• /
• pp.194-198
• /
• 2003

Recently, the use of TCP/IP protocols over wireless LANs poses significant problems. In this paper, we have analyzed transmission control protocol (TCP) packet transmission time for mobile IP over wireless local area networks (LANs) using a proposed a new random backoff scheme. We call it as a proxy backoff scheme. It is considered the transmission time of TCP packet on the orthogonal frequency division multiplexing (OFDM) in additive white gaussian noise (AWGN) channel. From the results, a proposed proxy backoff scheme produces a better performance than an original random backoff in mobile IP over wireless LANs environment. Also, in OFDM/quadrature phase shift keying (QPSK) medium access control (MAC), we have obtained that the transmission time in wireless channel decreases as the TCP packet size increases.

• Journal of information and communication convergence engineering
• /
• v.5 no.4
• /
• pp.377-381
• /
• 2007

Nonlinear effects and chromatic dispersion are the main causes of pulse degradation in high bit-rate WDM transmission systems and several architectures have been proposed to compensate them by means of optical phase conjugation. In this paper, a new method to exploit an optical phase conjugator (OPC) for nonlinearity and dispersion cancellation is disclosed. The proposed method is using optimal total dispersion of each fiber sections and it is simpler than those previously described in literature. Power penalty between WDM channels and the maximum launch power in $28{\times}40$ Gbps WDM transmission system designed by optimal total dispersion are more decreased and more increased than those in the conventional WDM transmission system with OPC, respectively. Furthermore, optimal total dispersion proposed in this research should provide the flexible design of WDM system, which less depends on OPC position.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.8A
• /
• pp.735-744
• /
• 2006

In this paper, the optimum pump light powers of optical phase conjugator(OPC) are numerically investigated as a function of amplifier spacing in 1,200 km $8{\times}40$ Gbps WDM systems with 0.1, 0.4, 0.8, or 1.6 ps/nm/km dispersion coefficient. It is confirmed that the variation of optimal pump light power dependence on amplifier spacing for NRZ transmission system is smaller than that for RZ transmission system through the evaluations and analysis of eye opening penalty(EOP) characteristics. And, in both cases of NRZ and RZ transmission, the variation of optimal pump light power is more increased as amplifier spacing becomes longer. Additionally, it is confirmed that the best amplifier spacing in NRZ and RZ transmission system is 50 km.

• Journal of Communications and Networks
• /
• v.15 no.5
• /
• pp.486-495
• /
• 2013

In this article, we suggest a two-dimensional genetic algorithm (GA) method that applies a cognitive radio (CR) decision engine which determines the optimal transmission parameters for multicarrier communication systems. Because a CR is capable of sensing the previous environmental communication information, CR decision engine plays the role of optimizing the individual transmission parameters. In order to obtain the allowable transmission power of multicarrier based CR system demands interference analysis a priori, for the sake of efficient optimization, a two-dimensionalGA structure is proposed in this paper which enhances the computational complexity. Combined with the fitness objective evaluation standard, we focus on two multi-objective optimization methods: The conventional GA applied with the multi-objective fitness approach and the non-dominated sorting GA with Pareto-optimal sorting fronts. After comparing the convergence performance of these algorithms, the transmission power of each subcarrier is proposed as non-interference emission with its optimal values in multicarrier based CR system.

• Proceedings of the KIEE Conference
• /
• 1999.07c
• /
• pp.1376-1378
• /
• 1999

Most conventional protection relays are based on processing information in the spectrum that is close to or at power frequency. It is, however, widely known that faults on transmission lines produce frequency components of a wide range In this respect, this paper describes the basis of a Protection technique for transmission lines which utilises high-frequency components. Fault-generated signals caused by post-fault and the signal derived from stack tuner is connected to the coupling capacitor of CVT. Digital signal processing is then applied to the captured information to determine whether the fault is inside or outside the Protected zone, and to discriminate the fault type on transmission line.

• Journal of information and communication convergence engineering
• /
• v.7 no.3
• /
• pp.372-376
• /
• 2009

In this paper, new and simple optical transmission link with fixed dispersion management (DM) scheme, i.e., pre(post) compensation and residual dispersion per span (RDPS) are fixed to net residual dispersion (NRD) = 0 ps/nm, and optical phase conjugator (OPC) having optimal position depending on launch power in WDM transmission system is proposed. Also, effective launch power range of WDM channels resulting 1 dB eye opening penalty (EOP) is induced as a function of OPC position. First, it is confirmed that, for applying DM into WDM transmission link fixed pre(post)compensation and RDPS, which are independence on exact system parameters except launch power, sufficiently are used in WDM links, but OPC with optimal position is needed for effective compensating impairments of WDM channels. And, it is confirmed that effective launch power is broader in case of RDPS = 100 ps/nm than in RDPS = 50 ps/nm. But, it is shown that the best OPC position offset is -0.6 km from a point of view of power window, which is defined as difference between maximum and minimum effective launch power.