• Transactions of the Society of Information Storage Systems
• /
• v.8 no.1
• /
• pp.16-21
• /
• 2012

SAW device is widely used as filters, sensors, actuators in various technologies. And capacitive sensor is tremendously used to measure pressure, gap, etc. The application of SAW device as signal conditioner of capacitive sensor reduces noise level and enables high precision measurement. The response increase of SAW based capacitive sensor is produced just before the two capacitive electrode contacts by the existence of parasitic resistance of capacitive electrode. In this paper, we analyze the effects of parasitic resistance and propose the calibrating method using lumped component and execute the high precision gap measurement using calibrated system. And xx nm resolution and yy ${\mu}m$ stroke was attained.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.1
• /
• pp.29-38
• /
• 2014

EDMS systems have been a main alternative for enterprise content management (ECM), which provide valuable functions for the effective control and management of organization-level digital contents. However, it has not been effective frequently for the purpose of integrative control of overall contents in an organization. One of reasons for this problem is that individuals usually create and store files with their own personal computers and do not move them to the central storage and control device, EDMS. Many occasions show that this situation can cause undesirable results for better management of enterprise contents. This paper introduced an approach of virtual folder which can directly connect individual computers and EDMS storage device without users' inconvenience. Adding the capacity of restricting usage of individual computer, users unavoidably and conveniently store and retrieve digital contents using EDMS server system. Several modules and implementing architecture for the virtual folder system are shown and the results of utilizing the system are explained with a case of application.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.8 no.1
• /
• pp.11-20
• /
• 2008

The structure of 2-bit/cell flash memory device was characterized for sub-50 nm non-volatile memory (NVM) technology. The memory cell has spacer-type storage nodes on both sidewalls in a recessed channel region, and is erased (or programmed) by using band-to-band tunneling hot-hole injection (or channel hot-electron injection). It was shown that counter channel doping near the bottom of the recessed channel is very important and can improve the $V_{th}$ margin for 2-bit/cell operation by ${\sim}2.5$ times. By controlling doping profiles of the channel doping and the counter channel doping in the recessed channel region, we could obtain the $V_{th}$ margin more than ${\sim}1.5V$. For a bit-programmed cell, reasonable bit-erasing characteristics were shown with the bias and stress pulse time condition for 2-bit/cell operation. The length effect of the spacer-type storage node is also characterized. Device which has the charge storage length of 40 nm shown better ${\Delta}V_{th}$ and $V_{th}$ margin for 2-bit/cell than those of the device with the length of 84 nm at a fixed recess depth of 100 nm. It was shown that peak of trapped charge density was observed near ${\sim}10nm$ below the source/drain junction.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.932-935
• /
• 2002

In this paper, we introduce new FTL(Flash Translation Layer) driver algorithm that tolerate the power off errors. FTL driver is the software that provide the block device interface to the upper layer software such as file systems or application programs that using the flash memory as a block device interfaced storage. Usually, the flash memory is used as the storage devices of the mobile system due to its low power consumption and small form factor. In mobile system, the state of the power supplement is not stable, because it using the small sized battery that has limited capacity. So, a sudden power off failure can be occurred when we read or write the data on the flash memory. During the write operation, power off failure may introduce the incomplete write operation. Incomplete write operation denotes the inconsistency of the data in flash memory. To provide the stable storage facility with flash memory in mobile system, FTL should provide the fault tolerance against the power off failure. SSR (Simple Sector Remapper) is a fault tolerant FTL driver that provides block device interface and also provides tolerance against power off errors.

• International journal of advanced smart convergence
• /
• v.8 no.2
• /
• pp.77-87
• /
• 2019

One of important concerns in information security is to control information flow. It is whether to protect confidential information from being leaked, or to protect trusted information from being tainted. In this paper, we present Piosk (Physical blockage of Information flow Kiosk) that addresses both the problems practically. Piosk can forestall and prevent the leakage of information, and defend inner tangible assets against a variety of malwares as well. When a visitor who carries a re-writable portable storage device, must insert the device into Piosk installed next to the security gate. Then, Piosk scans the device at the very moment, and detects & repairs malicious codes that might be exist. After that, Piosk writes the contents (including sanitized ones) on a new read-only portable device such as a compact disk. By doing so, the leakage of internal information through both insiders and outsiders can be prevented physically. We have designed and prototyped Piosk. The experimental verification of the Piosk prototype implementation reveals that, Piosk can accurately detect every malware at the same detection level as Virus Total and effectively prevent the leakage of internal information. In addition, we compare Piosk with the state-of-the-art methods and describe the special advantages of Piosk over existing methods.

• International Journal of Computer Science & Network Security
• /
• v.24 no.2
• /
• pp.124-128
• /
• 2024

Cloud computing is a technology for delivering information in which resources are retrieved from the internet through a web-based tools and applications, rather than a direct connection with the server. It is a new emerging computing based technology in which any individual or organization can remotely store or access the information. The structure of cloud computing allows to store and access various information as long as an electronic device has access to the web. Even though various merits are provided by the cloud from the cloud provides to cloud users, it suffers from various flaws in security. Due to these flaws, data integrity and confidentiality has become a challenging task for both the storage and retrieval process. This paper proposes a novel approach for data protection by an improved auditing based methodology in cloud computing especially in the process of cloud storage. The proposed methodology is proved to be more efficient in auditing the threats while storing data in the cloud computing architecture.

• Journal of the Optical Society of Korea
• /
• v.17 no.4
• /
• pp.336-343
• /
• 2013

Recently various types of driver assistance systems have been used for automobiles. In 2008, the U.S Congress passed a law which required that most cars be equipped with devices to warn objects behind the vehicle. Because of that, market of rear view cameras is expected to rise dramatically. Therefore many suppliers try to provide a wide angle camera for car makers. But a high distortion is caused by the wide angle might result in lower image quality. In order to improve the image quality, normally we use an algorithm to correct a distortion. Though we can improve the distorted image by correction algorithm, we must pay more cost to use it. In this paper, we propose a new optical system reducing a distortion in contrast to a conventional lens without cost. In other words, we can see only an area of interest. That is similar to reducing a field of view. Using a new optical system, we can get a less distorted image. In order to view an area of interest, we introduce an off axis optical system having refractive surfaces and reflective surfaces. In this paper, we describe the results of design and, evaluation of an off axis wide angle compact imaging system. In comparison to conventional wide angle lens, we can get the improvement of MTF, distortion, and lateral color aberrations. And we also can reduce a total cost because we don't need the outer apparatus or bracket to mount on the car.

• Journal of Internet Computing and Services
• /
• v.16 no.5
• /
• pp.29-38
• /
• 2015

The Energy Storage System stores electricity for later use. This system can store electricity from legacy electric power systems or renewable energy systems into a battery device when demand is low. When there is high electricity demand, it uses the electricity previously stored and enables efficient energy usage and stable operation of the electric power system. It increases the energy usage efficiency, stabilizes the power supply system, and increases the utilization of renewable energy. The recent increase in the global interest for efficient energy consumption has increased the need for an energy storage system that can satisfy both the consumers' demand for stable power supply and the suppliers' demand for power demand normalization. In general, an energy storage system consists of a Power Conditioning System, a Battery Management System, a battery cell and peripheral devices. The specifications of the subsystems that form the energy storage system are manufacturer dependent. Since the core component interfaces are not standardized, there are difficulties in forming and operating the energy storage system. In this paper, the design of the profile structure for energy storage system and realization of private profiling system for energy storage system is presented. The profiling system accommodates diverse component settings that are manufacturer dependent and information needed for effective operation. The settings and operation information of various PCSs, BMSs, battery cells, and other peripheral device are analyzed to define profile specification and structure. A profile adapter software that can be applied to energy storage system is designed and implemented. The profiles for energy storage system generated by the profile authoring tool consist of a settings profile and operation profile. Setting profile consists of configuration information for energy device what composes energy saving system. To be more specific, setting profile has three parts of category as information for electric control module, sub system, and interface for communication between electric devices. Operation profile includes information in relation to the method in which controls Energy Storage system. The profiles are based on standard XML specification to accommodate future extensions. The profile system has been verified by applying it to an energy storage system and testing charge and discharge operations.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.811-814
• /
• 2007

Mobile device will be able to use the various contents from the advancement of the wireless Internet and mobile device manufacture technique. Each devices HTTP headers about under using provides terminal information to contents provider which is provided the contents which is suitable in device. But there is not a standard for a terminal information proηsion and when using the contents of service network outside, interoperability problems mobile communication it will provides terminal information in different method. International Organization for Standard OMA UAProf about under using it solved interoperability problems from outside. But about under using it provides terminal information, MMS support and Smart Card support, against an external storage space supporting information it is not seen clearly UAProf not to be, it will not be able to provide terminal information which is complete. This paper hereupon it designed UAProf in base which provides the contents which has become optimize to the mobile device of domestic environment the mobile device description language which expresses device information which is necessary.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.382-385
• /
• 2003

Introduction of digital broadcasting service does not only mean the change of information transmission method but also the change of total broadcasting system. In past day, Television was only received one-sided information from broadcasting station, but digital broadcasting means that digital television becomes the most important means of information transmission by the introduction of new programming, lots of channels, data service, multi communication. In the age of the digital broadcasting, the recording and replay medium's interest is getting higher. The medium is able to record more than 24 hours' digital broadcasting programs without additional tapes. In this paper the recording and replay device using HDD was implemented and device driver based on linux was programmed. It has Intel PXA250 processor and hard disk is used as storage equipment. And transport Stream is saved on hard disk through PXA250's data bus. FIFO is added to solve the different saving speed and FPGA is also added to display the saved data.