• Korean Journal of Ecology and Environment
• /
• v.46 no.1
• /
• pp.94-102
• /
• 2013

This study was carried out to determine the variation of the water level and crosssection area for investigating changes of stream foreland, and to determine the correlation between the average flow velocity and cross-section area so as to understand the hydrological characteristics of the stream. The slope of the cross-sectional area was changed in water levels of 0.6~1.0 m and 1.8~2.0 m. The first change occurred in the low-water level season, and the second change occurred in the high-water level seasons. It is assumed that the changes occurred due to the geological transfigure. The correlation between the cross-sectional area and the average flow velocity was 0.22~0.86 in the exponential equation and 0.20~0.87 in the linear equation. The low water level had a higher correlation than the high water level, and free weirs in the upper stream showed a very low correlation. Therefore, this study provides novel information for the management of water quality in the riverside, using correlation equations of the water level and flow velocity with the cross section area.

• Journal of Animal Environmental Science
• /
• v.17 no.1
• /
• pp.39-48
• /
• 2011

The present survey was conducted to provide basic information on automatic milking system (AMS) in relation to purchase motive, milk yield and quality, customer satisfaction, difficulties of operation and customer suggestions, etc. Purchase motives of AMS were insufficient labor (44%), planning of dairy experience farm (25%), better performance of high yield cows (19%) and others (6%), respectively. Average cow performance after using AMS was 30.9l/d for milk yield, 3.9% for milk fat, 9,100/ml for bacterial counts. Sixty-eight percentage of respondents were very positive in response to AMS use for their successors but 18% were negative. The AMS operators were owner (44%), successor (44%), wife (6%) and company worker (6%), respectively. The most difficulty (31%) in using AMS was operating the system and complicated program manual. The rate of response to system error and breakdown was 25%. The reasons for culling cow after using AMS were mastitis (28%), reproduction failure (19%), incorrect teat placement (12%), metabolic disease (7%) and others (14%), respectively. Fifty-six percentages of the respondents made AMS maintenance contract and 44% did not. Average annual cost of the maintenance contract was 6,580,000 won. Average score for AMS satisfaction measurement (1 to 5 range) was 3.2 with decrease of labor cost 3.7, company A/S 3.6, increase of milk yield 3.2 and decrease of somatic cell count 2.8, respectively. Suggestions for the higher efficiency in using AMS were selecting cows with correct udder shape and teat placement, proper environment, capital and land, and attitude for continuous observation. Systematic consulting was highly required for AMS companies followed by low cost for AMS setup and systematization of A/S.

• Korean Journal of Environmental Agriculture
• /
• v.16 no.3
• /
• pp.259-263
• /
• 1997

To investigate chemical changes of agricultural water in Nam river used for the basic information. Samples were collected from seven sites along the Nam river and were analyzed for inorganic content from April to September in $1994{\sim}1995$. Average value of analyzed inorganic concentrations at seven sampling sites were pH 7.9, COD 7.3mg/l, $NO_3-N$ 1.2mg/l, $Na^+$ 6.2mg/l, $Cl^-$ 14.8mg/l, EC 0.13dS/m, $PO_4\;^{3-}$ 0.21mg/l, $K^+$ 2.6mg/l, $Ca^{2+}$ 10.8mg/l,$Mg^{2+}$ 2.9mg/l, $SO_4\;^{2-}$ 10.5mg/l, $Fe^{3+}$ and $Zn^{2+}$ 0.02mg/l. The monthly average value of COD, $NO_3-N$, $Na^+$ and $Cl^-$ showed highest peak in July $8.4{\sim}11.6$, $1.1{\sim}1.7$, $5.4{\sim}13.1$ $18.9{\sim}27.9mg/l$. The highest region of average COD, $NO_3-N$, $Na^+$ and $Cl^-$ were Weola pumping station, $8.8{\sim}11.3$, $1.6{\sim}2.4$, $9.0{\sim}10.2$ and $21.7{\sim}23.0mg/l.$ The ionic $copmposition({\Sigma}A/{\Sigma}C)$ : ratio between total equivalant of anions and canon) of Nam river was higher at Weola pumping station than other topography. The EC was positively correlated with $K^+$, $Ca^{2+}$, $Mg^{2+}$, $Na^+$, $Cl^-$ and $SO_4\;^{2-}$.

• Korean Journal of Clinical Laboratory Science
• /
• v.36 no.1
• /
• pp.13-18
• /
• 2004

This study was designed to establish working range for reoportable range in own laboratory in order to cover the upper and lower limits of the range in test method. We experimented ten times during 10 days for setting of reportable range with between run for method evaluation. It is generally assumed that the analytical method produces a linear response and that the test results between those upper and lower limits are then reportable. CLIA recommends that laboratories verify the reportable range of all moderate and high complexity tests. The Clinical Laboratory Improvement Amendments(CLIA) and Laboratory Accreditation Program of the Korean Society for Laboratory Medicine states reportable range is only required for "modified" moderately complex tests. Linearity requirements have been eliminated from the CLIA regulations and from others accreditation agencies, many inspectors continue to feel that linearity studies are a part of good lab practice and should be encouraged. It is important to assess the useful reportable range of a laboratory method, i.e., the lowest and highest test results that are reliable and can be reported. Manufacturers make claims for the reportable range of their methods by stating the upper and lower limits of the range. Instrument manufacturers state an operating range and a reportable range. The commercial linearity material can be used to verify this range, if it adequately covers the stated linear interval. CLIA requirements for quality control, must demonstrate that, prior to reporting patient test results, it can obtain the performance specifications for accuracy, precision, and reportable range of patient test results, comparable to those established by the manufacturer. If applicable, the laboratory must also verify the reportable range of patient test results. The reportable range of patient test results is the range of test result values over which the laboratory can establish or verify the accuracy of the instrument, kit or test system measurement response. We need to define the usable reportable range of the method so that the experiments can be properly planned and valid data can be collected. The reportable range is usually defined as the range where the analytical response of the method is linear with respect to the concentration of the analyte being measured. In conclusion, experimental results on reportable range using concentrated control sample and zero calibrators covering from highest to lowest range were salicylate $8.8{\mu}g/dL$, phenytoin $0.67{\mu}g/dL$, phenobarbital $1.53{\mu}g/dL$, primidone $0.16{\mu}g/dL$, theophylline $0.2{\mu}g/dL$, vancomycine $1.3{\mu}g/dL$, valproic acid $3.2{\mu}g/dL$, digitoxin 0.17ng/dL, carbamazepine $0.36{\mu}g/dL$ and acetaminophen $0.7{\mu}g/dL$ at minimum level and salicylate $969.9{\mu}g/dL$, phenytoin $38.1{\mu}g/dL$, phenobarbital $60.4{\mu}g/dL$, primidone $24.57{\mu}g/dL$, theophylline $39.2{\mu}g/dL$, vancomycine $83.65{\mu}g/dL$, valproic acid $147.96{\mu}g/dL$, digitoxin 5.04ng/dL, carbamazepine $19.76{\mu}g/dL$, acetaminophen $300.92{\mu}g/dL$ at maximum level.

• KIPS Transactions on Software and Data Engineering
• /
• v.9 no.10
• /
• pp.303-308
• /
• 2020

The ReLU(Rectified Linear Unit) function has been dominantly used as a standard activation function in most deep artificial neural network models since it was proposed. Later, Leaky ReLU, Swish, and Mish activation functions were presented to replace ReLU, which showed improved performance over existing ReLU function in image classification task. Therefore, we recognized the need to experiment with whether performance improvements could be achieved by replacing the RELU with other activation functions in the super resolution task. In this paper, the performance was compared by changing the activation functions in EDSR model, which showed stable performance in the super resolution task. As a result, in experiments conducted with changing the activation function of EDSR, when the resolution was converted to double, the existing activation function, ReLU, showed similar or higher performance than the other activation functions used in the experiment. When the resolution was converted to four times, Leaky ReLU and Swish function showed slightly improved performance over ReLU. PSNR and SSIM, which can quantitatively evaluate the quality of images, were able to identify average performance improvements of 0.06%, 0.05% when using Leaky ReLU, and average performance improvements of 0.06% and 0.03% when using Swish. When the resolution is converted to eight times, the Mish function shows a slight average performance improvement over the ReLU. Using Mish, PSNR and SSIM were able to identify an average of 0.06% and 0.02% performance improvement over the RELU. In conclusion, Leaky ReLU and Swish showed improved performance compared to ReLU for super resolution that converts resolution four times and Mish showed improved performance compared to ReLU for super resolution that converts resolution eight times. In future study, we should conduct comparative experiments to replace activation functions with Leaky ReLU, Swish and Mish to improve performance in other super resolution models.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.12
• /
• pp.45-52
• /
• 2015

With the rising interest in the environment, more attention on ecological restoration for damaged slope surface to restore its original state has been drawn. Generally, the most useful method is vegetation based spray work. This method uses green soil including sewage sludge, sawdust, paper sludge, and weathered granite soil. However, because there are neither accurate information nor test values about green soil, green soil is often lost by environmental factors such as rainfalls and strong winds. To solve the problem of green soil, it is necessary to prepare design standards about green soil, and conduct studies to deal with green soil loss in consideration of various variables including basic material property, soil quality of slope surface, and weather. This study was conducted in the mixture of green soil and eco-friendly soil stabilizer. With green soil, basic material property test and compaction test were conducted for the analysis on the basic characteristics of green soil. In the mixture with soil stabilizer at a certain ratio, we conducted shear strength test depending on the ratio in order to analyze the maximum shear strength, cohesion and the change in internal friction angles. Furthermore, in the mixture ratio of green soil and soil stabilizer, which is the same as the ratio in the shear strength test, an inclination of slope surface was made in laboratory for the analysis on erosion and germination rate. Finally, this study evaluated the most effective and economic mixing ratio of soil stabilizer to cope with neighboring environmental factors. According to the test, the shear strength of green soil increased up to 51% rely onto the mixing ratio of and a curing period, and its cohesion and internal friction angle also gradually increases. It is judged that the mixture of soil stabilizer was effective in improving shear strength and thereby increased the stability of green soil.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.1
• /
• pp.13-22
• /
• 2009

The composite resin, due to its esthetic quality, is considered the material of choice for restoration of anterior teeth. To get a satisfactory result in the composite resin restorations, it is necessary to choose right shade. At present, most of the commercial composite resins are based on the Vita Lumin shade guides or shade guides that are provided by their company, but color differences among them might be expected even using the same shade in various materials. This study is to measure color differences between various light-cured composite resins and shade guides and to provide the clinicians with information which may aid in improved color match of esthetic restoration. Four kinds of light-cured composite resins (Gradia Direct (GD), Z250 (Z250), Clearfil AP-X (AP-X), Esthet X (E X)) and shade guides with A2 and A3 shade were used. Three specimens of each material and one specimen of each shade guide were made. Each composite resin was filled into the Teflon mold (1.35 mm depth, 8 mm diameter), followed by compression, polymerization and polishing with wet sandpaper. Shade guides were grinded with polishing stones and rubber points to a thickness of approximately 1.35 mm. Color characteristics were performed with a spectrophotometer(color i5, GretagMacbeth, USA). A computer-controlled spectrophotometer was used to determine CIELAB coordinates ($L^*$, $a^*$, $b^*$) of each specimen and shade guide. The CIELAB measurements made it possible to evaluate the amount of the color difference values (${\Delta}E^*ab$) between composite resins and shade guides. CIE standard D65 was used as the light source. The results were as follows : 1. Among the $L^*$, $a^*$, $b^*$ values of most of 4 kinds of composite resin specimens which are produced by same shade, there were significant differences(p<0.05). 2. Among all 4 kinds of composite resin specimens which are produced by same shade, there were color differences that is perceptible to human eye(${\Delta}E^*>3.3$). 3. Between most of composite resin specimens investigated and their corresponding shade guides, there were color differences that is perceptible to human eye(${\Delta}E^*>3.3$). 4. In the clinical environment, it is recommended that custom shade guides be made from resin material itself for better color matching. Shade guides supplied by manufacturers or Vita Lumin shade guide may not provide clinicians a accurate standard in matching color of composite resins, and there are perceptible color differences in most of products. Therefore, it is recommended that custom shade guides be made from resin material itself and used for better color matching.

• Clinical and Experimental Reproductive Medicine
• /
• v.37 no.4
• /
• pp.349-359
• /
• 2010

Objective: This study was performed to compare the clinical outcome of elective single embryo transfer (eSET) performed at the cleavage stage to that of elective double embryo transfer (eDET). Methods: Of the women less than 36 years old who visited Daegu Maria from January 2008 to April 2009, the only women (n=330) with more than 8 mm of endometrial thickness and at least one good quality embryo, who were treated with GnRH agonist long protocol, were included in this study. After information about complications that can arise by multiple embryo transfer, either eSET or eDET was conducted by their request (167 and 163, respectively).Results: The implantation rate of eSET group was significantly higher than that of eDET group (53.9% vs. 40.2%, p<0.01). The twin pregnancy rate of eSET group was significantly lower than that of eDET group (1.1% vs. 32.3%, p<0.001). However, there were no significant differences between two groups in the clinical pregnancy (53.3% vs. 60.7%, p=0.172), ongoing pregnancy (47.3% vs. 54.6%, p=0.185) and live birth rates (44.9% vs. 50.9%, p=0.275). The number of the surplus embryos which developed to the blastocyst stage and cryopreserved at that stage was significantly higher in eSET group than that of eDET group ($3.2{\pm}2.6$ vs. $2.1{\pm}2.4$, p<0.001). Conclusion: These results suggest that eSET should reduce significantly the multiple baby pregnancy without decreasing the whole pregnancy rate in women with less than 36 years old.

• Korea journal of population studies
• /
• v.26 no.2
• /
• pp.1-32
• /
• 2003

An analysis on cause-specific mortality at the provincial level provides essential information for policy formulation and makes it possible to draw hypotheses regarding various diseases and causes of death. Although the mortality level and causes of death at the provincial level are determined by the multiple effects of socioeconomic, cultural, medical and ecological factors, this study primarily intends to examine similarities and differences of cause-specific mortality at the provincial level. Utilizing the registered death and the registered population as of 1998, the delayed death registration and unreported infant deaths were supplemented at the provincial level and age-standardized death rates and life tables were calculated. Regarding the mortality level due to all causes, major findings were as follow: (1) For both sexes as a whole, Seoul showed the lowest mortality level, and Jeonnam showed the highest mortality level; and (2) The differences of the mortality level among provinces were greater for males than females and for those less than 65 years than those 65 years and over. Regarding the cause-specific mortality level revealed in all indicators (cause-specific age-standardized mortality rates and the probability of dying at birth due to a specific cause for males, females, and both sexes combined respectively), the major findings were as follow: (1) The mortality level due to heart diseases was the highest in Busan and the lowest in Gangweon; (2) The mortality level due to liver diseases was the highest in Chonnam; and (3) The mortality level due to traffic accidents was the highest in Chungnam and the lowest in Inchon. As the mortality differentials at the provincial level are related to various factors, exploratory statistical analysis is attempted for the 25 explanatory variables including socioeconomic variables and 90 mortality variables. Mortality due to all causes are related to socioeconomic variables. Among cause-specific mortality, mortality due to liver diseases and traffic accidents is related to socioeconomic variables. Finally, the need to improve the quality of death certificate is discussed.

• Journal of Korean Ophthalmic Optics Society
• /
• v.5 no.2
• /
• pp.27-31
• /
• 2000

As the functional test of cornea. The clinical value of keratometric information was important for assessment the curvature of the cornea, the quality of the corneal surface, the stability of the corneal curvature, and the direction of the corneal astigmatism. This study was performed the comparative analysis of male and female of adult on the base curve, power and astigmatism of the Cornea. On the corneal base curve, the male right eye was 7.656 mm in vertical and 7.966 mm in horizontal. But, the male left cornea was 7.714 mm in vertical base curve and 8.026 mm in horizontal base curve. On the other hand, the female right eye cornea was 7.559 mm in vertical base curve and 7.695 mm in horizontal base curve. But, the female left eye cornea was 7.444 mm in vertical base curve and 7.742 mm in horizontal base curve. On the corneal diopter power, the male right eye was 44.063 diopter in vertical and 43.738 diopter in horizontal. But the male left eye was 44.046 diopter in vertical and 42.304 diopter in horizontal. On the other hand, the female right eye was 44.082 diopter in vertical and 43.77 diopter in horizontal. But, the female left eye was 44.347 diopter in vertical and 43.495 diopter in horizontal. According to the corneal astigmatism axis. The male right eye have 89.9% positive for with the - rule astigmatism, and 8.1 % positive for against - the - rule astigmatism. But, he male left eye have 91.89% positive for with - the - rule astigmatism, and 8.11 % positive for against - the - rule astigmatism. On the other hand, The female right eye have 76.92% positive for with - the - rule astigmatism, and 23.08 % positive for against - the - rule astigmatism. But, the female left have 80.76 % positive for with - the - rule astigmatism, and 17.31 % positive for against - the - rule as tigmatism. The diopter power of corneal astigmatism have 25.57% positive for behind 1 diopter, 44.89% positive for 1 diopter, 18.18% positive for 2 diopter, 5.11% positive for 3 diopter and 6.25% positive for over 4 diopter.