• Journal of Korean Society for Atmospheric Environment
• /
• v.30 no.1
• /
• pp.26-36
• /
• 2014

The uncertainty assessment is important to improve the reliability of emission inventory data. The DARS (Data Attribute Rating System) have recommended as the uncertainty assessment technic of emission inventory by U.S. EPA (Environmental Protection Agency) EIIP (Emission Inventory Improvement Program). The DARS score is based on the perceived quality of the emission factor and activity data. Scores are assigned to four attributes; measurement/method, source specificity, spatial congruity and temporal congruity. The resulting emission factor and activity rate scores are combined to arrive at an overall confidence rating for the inventory. So DARS is believed to be a useful tool and may provide more information about inventories than the usual qualitative grading procedures (e.g. A through E). In this study, the uncertainty assessment for 2009 CAPSS (Clean Air Policy Support System) emission inventory is conducted by DARS. According to the result of this uncertainty assessment, the uncertainty for fugitive dust emission data is higher than other sources, the uncertainty of emission factor for surface coating is the highest value, and the uncertainty of activity data for motor cycle is the highest value. Also it is analysed that the improvement of uncertainty for activity data is as much important as the improvement for emission factor to upgrade the reliability of CAPSS emission inventory.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.5
• /
• pp.97-106
• /
• 2009

An objective of this study is to give practical information that could be used for calculating pollutant emission factors and fuel economy from Korean Inspection & Maintenance program, which has been using steady state acceleration simulation mode. Concentration results from I/M test is adequately converted to mass emission factors and fuel efficiency data, which have unit of g/km and km/L, respectively. Exhaust volume flow(EVF), which is for converting emission result from concentration to mass, is measured by tracer method in various vehicle speed - power condition. It is found that there is an apparent second order relationship between EVF and vehicle inertia weight. EVF is expressed in function of vehicle inertia weight in order to estimate EVF in I/M site without measuring device. Converted mass emission results from measured EVF and raw emission analyzer show a satisfactory agreement with those from conventional CVS-bag type measurement system. Mass emission factors and fuel efficiency from measured EVF and estimated EVF also show good agreement to each other. Considering that an I/M program has great advantages to recruit-based emission test in terms of the number of test vehicle, the information in this study can be used for developing an alternative procedure to collect more various data to establish national database of mobile emission factors and fuel economy, even though the driving cycle in I/M program is steady state cycle rather than transient cycle.

• Management & Information Systems Review
• /
• v.33 no.3
• /
• pp.93-104
• /
• 2014

This study investigates price discovery between BlueNext spot and futures in EU ETS carbon emission markets using vector error correction model, GG and Hasbruck information ratio. Especially EUA is European Union Allowances traded on the Emissions Trading Scheme. This emission asset attracts and increasing attention among operators, investors and brokers on emission markets. In this study, we found BlueNext spot and EUA futures market are cointegrated. Following the preceding studies, we judged that EUA futures market contribute to the price discovery process than BlueNext spot market when this GG and Hasbrouck information ratio for BlueNext market are larger than 0.5. In other words, the futures market of EUA plays a more dominant role in price discovery than the spot market.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.10
• /
• pp.4988-5012
• /
• 2019

As a subset of the Internet of Things, the Internet of Energy (IoE) is expected to tackle the problems faced by the current smart grid framework. Notably, the conventional day-ahead power scheduling of the smart grid should be redesigned in the IoE architecture to take into consideration the intermittence of scattered renewable generations, large amounts of power consumption data, and the uncertainty of the arrival time of electric vehicles (EVs). Accordingly, a day-ahead power scheduling system for the future IoE is proposed in this research to maximize the usage of distributed renewables and reduce carbon emission caused by the traditional power generation. Meanwhile, flexible charging mechanism of EVs is employed to provide preferred charging options for moving EVs and flatten the load profile simultaneously. The simulation results revealed that the proposed power scheduling mechanism not only achieves emission reduction and balances power load and supply effectively, but also fits each individual EV user's preference.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.2
• /
• pp.252-259
• /
• 2017

In this paper, we propose a novel method for extracting an accurate depth of a trap that causes RTS(Random Telegraph Signal) noise. The error rates of the trap depth rely on the mean time constants and its ratio. Here, we determined how many data of the capture and emission time constant are necessary in order to reduce the trap depth error caused by an inaccurate mean time constant. We measured the capture and emission time constants up to 100,000 times in order to ensure that the samples had statistical meaning. As a result, we demonstrated that at least 1,000 samples are necessary to satisfy less than 10% error for trap depth. This result could be used to improve the accuracy of RTS noise analysis.

• Journal of Information Display
• /
• v.10 no.3
• /
• pp.107-110
• /
• 2009

Efficient deep-blue organic light-emitting diodes were demonstrated using 4,4'-bis(9-ethyl-3-carbazovinylene)-1,1'-biphenyl doped in double-emission layers (D-EMLs). The D-EML system, which consists of 2-methyl-9,10-di(2-naphthyl)anthracene and 1,4-(dinaphthalen-2-yl)-naphthalene as blue hosts, was employed to broaden the recombination zone and to ensure the good confinement of the holes and electrons. The optimized device showed a peak current efficiency of 4.47 cd/A, a peak external quantum efficiency of 4.09%, and Commission Internationale de L'Eclairage coordinates of (0.16, 0.10).

• Journal of the Korean Vacuum Society
• /
• v.14 no.4
• /
• pp.258-262
• /
• 2005

We report on the field emission properties from vertically aligned carbon nanotubes (CNTs) produced by a triode PECVD with a SiNx capping layer on metal catalyst. It is found that the CNTs density can be controlled by the capping layer thickness and decreases with increasing SiNx thickness. The CNT density of $\~$ 104/$cm^{2}$ exhibited highest electron emission characteristics, the threshold field of 1.2 V/$\mu$m and the current density of 0.17 mA/$cm^{2}$ at 3.6 V/$\mu$m. We have carried out investigation of electron emission stability under ambient gas of N2. The electron emission stability was improved with decreasing CNT density. Under $1\times$$10^{-5}$ Torr ambient pressure, the CNTs in 5 $\mu$m hole show electron emission current higher than $1\times$$10^{-4}$ A/cm2 and it's electron emission uniformity has $2\%$.

• Journal of Korean Society of Rural Planning
• /
• v.27 no.4
• /
• pp.33-41
• /
• 2021

Ammonia emission from the agricultural sector contributes almost 78% of total ammonia emission in Korea. The current ammonia emission estimation method from fertilizer application has high uncertainty and needs to be improved. In this study, we propose an improvement method for estimating the amount of ammonia emission from agricultural land with improved spatiotemporal resolution using Farm Manager Registration Information System and criteria for the fertilizer. We calculated ammonia emissions by utilizing the 2020 cultivation area provided by Farm Manager Registration Information System for 55 kinds of upland crops cultivated in the field area of the farmland. As a result, soybeans were the most cultivated field crop in 2020, and the area of cultivated land was surveyed at about 77,021 ha, followed by sweet potatoes 22,057 ha, garlic 20004 ha, potatoes 17,512 ha, and corn 16,636 ha. The month with the highest ammonia emissions throughout the year was calculated by emitting 590.01 ton yr-1 in May, followed by 486.55 ton yr-1 in March. Hallim-eup in Jeju showed the highest ammonia emission at 117.50 ton yr-1.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1545-1546
• /
• 2007

Zinc gallate-based RGB phosphors and vertically aligned carbon nanotube emitters are prepared for flat field-emission lamp. The blend phosphors of blue $ZnGa_2O_4$, green $ZnGa_2O_4:Mn^{2+}$ and red $ZnGa_2O_4:Cr^{3+}$ are coated on the front glass, and the carbon nanotubes are chemically bonded on the rear ITO glass as a cathode.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.5 no.1
• /
• pp.43-50
• /
• 1996

From a manufacturing standpoint it would be desirable to monitor the degradation of drawing die, that is essential for the maintenance of die quality, the evaluation of product integrity and the reducing scrap. Acoustic emission is powerful method in monitoring fine wire drawing process, especially in detecting the die fracture at early stage. Experiments also suggested that acoustic emission sigals contained valuable information regarding the stage of a drawing process such as the surface appearance of products and the condition of lubrication. These informations are AE monitoring techniques a possible tool in monitoring the drawing process operation. In order to approach this, this paper discusses the nature of acoustic emission signal presented which illustrate the effects of wire and die material, lubricants, and drawing speed on the generation and the mean voltage level of acoustic emission signal. From these experimental, results, we understanded controlling factors of acoustic emission generation.