• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.477-480
• /
• 2003

Packet losses in the Internet can dramatically degrade quality of multimedia streams. Forward Error Correction (FEC) is one of the best methods that can protect data from packet erasures by means of sending additional redundant information. Proposed control algorithm provides the possibility of receiving real-time multimedia streams of given quality wifth minimal traffic overhead. The traffic optimization is reached by adjusting packet size as well as block code parameters. Calculations and simulation results show that for non-bursty network conditions traffic optimization can lead to more than 50% bandwidth reduction.

• Korean Management Science Review
• /
• v.18 no.2
• /
• pp.1-10
• /
• 2001

Due to environmental change in market, delivery satisfaction to customer end redaction of LeadTime are critical In the Make-to-Order manufacturing system. This paper focuses on Order Feasibility Decision System Based on SNS System. We suggest BOP (Bill of Process) in which aggregated information is used When the load p1anning problem is solved while more detailed information is used when the scheduling problem is solved.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.85-88
• /
• 2002

Maintaining a proper level of cell lead, system throughput can be maximized by a transmission rate control over the uplink in DS/CDMA cellular system to support integrated services of real-time and delay-tolerant traffic. We find that the cell load-based rate control scheme can be further enhanced by taking the varying channel condition into account In conjunction with some fair scheduling algorithm. Our simulation results show that the proposed scheme outperforms the original cell load-based rate control with the round-robin sharing scheduling scheme.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.147-147
• /
• 2018

In this article, we use an open source software library: TensorFlow, developed for the purposes of conducting very complex machine learning and deep neural network applications. However, the system is general enough to be applicable in a wide variety of other domains as well. The proposed model based on a deep neural network model, LSTM (Long Short-Term Memory) to predict the river water level at Okcheon Station of the Guem River without utilization of rainfall - forecast information. For LSTM modeling, the input data is hourly water level data for 15 years from 2002 to 2016 at 4 stations includes 3 upstream stations (Sutong, Hotan, and Songcheon) and the forecasting-target station (Okcheon). The data are subdivided into three purposes: a training data set, a testing data set and a validation data set. The model was formulated to predict Okcheon Station water level for many cases from 3 hours to 12 hours of lead time. Although the model does not require many input data such as climate, geography, land-use for rainfall-runoff simulation, the prediction is very stable and reliable up to 9 hours of lead time with the Nash - Sutcliffe efficiency (NSE) is higher than 0.90 and the root mean square error (RMSE) is lower than 12cm. The result indicated that the method is able to produce the river water level time series and be applicable to the practical flood forecasting instead of hydrologic modeling approaches.

• 보존과학연구
• /
• s.30
• /
• pp.137-147
• /
• 2009

Mireuk temple site is located in Iksan, on the North Jeolla province in Korea, and confirmed tiles, potteries, metals, glasses and other materials that are remaining between Baekje Kingdom and Joseon period after excavations. It is also detected that production and supply of the materials in this era were started inside the country(domestic) at that time. This is important information for the understanding of the production and circulation systems. In this study, lead isotope ratios of 18 samples includedlead glass, crucibles and glazed rafter tiles excavated from Mireuk Temple Site of Baekje era were analyzed for the provenance study of raw glass material supply and distribution of glass products. The results of lead isotope ratio analysis have shown that all raw materials were located in the distribution area of Baekje region and also confirmed to be accord with the previous research results. As comparing the lead isotope ratios of glass and glass materials excavated from Mireuk Temple Site with Miyajidake tomb from Fukuoka Prefecture in Japan, it is found that the same raw materials were used for glass production. It means that there is the active connection between Mireuk temple site and Miyajidake and that these areas are sharing the same materials at the same period. It also shown that artifacts excavated from Miyajidake were strongly influenced from Baekje culture. And it is estimated that there is a possibility of the use ofsame materials whether the supplies of them are from a specific place of Baekje or not

• Korean Institute of Interior Design Journal
• /
• v.20 no.5
• /
• pp.96-104
• /
• 2011

Assuming that different spatial types involves the change of observation time to acquire the spatial information, this study intended to analyze the observation time by interior space types and derive the proper time for spatial evaluation. Coming to the study method, in order to analyze the characteristics of observation time in the image evaluation of interior space by types, it looked into the observation time chosen by the testees during evaluation. The findings of this study are as follows: First, the observation time differed by genders and spatial types: men's average time was longest for modern (93.3 sec.) and natural (89.4 sec.) spaces; women's average time was longest for classic space (110.7 sec.), which was the shortest for men. Second, the intensity of observation time zone differed by spatial types: this finding can imply that different design types require different establishment of observation time for evaluation even if the spatial elements are the same. Third, analyzing the distribution of time zones chosen by most testees showed that men's observation time zones were more intensely distributed than those of women. Fourthly, the observation lime for general space could be derived from the gender-based comparison that excluded the difference by types, but considering that different design types lead to different observation time, it could be seen as proper for evaluation of interior space to establish the difference of observation time by spatial types. Finally, Analysis showed the highest preference to the time '(3)'. However, obtaining information presented is the most highly effective time is '(6). Thus, the preferred time zone is different and effective, according to the results of the analysis.

• Journal of Korea Spatial Information System Society
• /
• v.10 no.4
• /
• pp.97-102
• /
• 2008

A wireless sensor network consists of many sensors that collect and transmit physical or environmental conditions at different locations to a server continuously. Many researches mainly focus on processing continuous queries on real-time data stream. However, they do not concern the problem of storing the historical data, which is mandatory to the historical queries. In this paper, we propose two time-based storage methods to store the sensor data stream and reduce the managed tuples without any loss of information, which lead to the improvement of the accuracy of query results.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.11
• /
• pp.2987-3002
• /
• 2023

In 2015, the number of senior citizens aged 65 and over in Korea was 6,662,400, accounting for 13.1% of the total population. Along with these social phenomena, risk information related to the elderly is increasing every year. In particular, a fall accident caused by a fall can cause serious injury to an elderly person, so special attention is required. Therefore, in this paper, we implemented a system that monitors fall accidents and informs them in real time to minimize damage caused by falls. To this end, beacon-based indoor location positioning was performed and biometric information based on an integrated module was collected using various sensors. In other words, a multi-functional sensor integration module was designed based on Arduino to collect and monitor user's temperature, heart rate, and motion data in real time. Finally, through the analysis and prediction of measurement signals from the integrated module, damage from fall accidents can be reduced and rapid emergency treatment is possible. Through this, it is possible to reduce the damage caused by a fall accident, and rapid emergency treatment will be possible. In addition, it is expected to lead a new paradigm of safety systems through expansion and application to socially vulnerable groups.

• Journal of Distribution Research
• /
• v.1 no.2
• /
• pp.141-172
• /
• 1996

This study is to investigate global logistics strategies of Korean electronics companies. in terms of service parts. According to the survey, Korean electronics companies were pursuing multi-level global logistics network such as global, continental, national, regional and service center echelon for improving the efficiency of service parts global logistics. Especially there was a tendency of developing new continental distribution centers. And the companies were exploiting efficiency through inventory control by multi-level echelon, demand forecasting by the product life cycle and supply and service lead time management. But there were some insufficient factors for the efficiency of global logistics operation at the construction of worldwide real time logistics information system and pursuit of the efficiency on the whole network including subcontractors. For the future competitive advantage of the Korean electronics companies, the following are suggested: 1) the establishment of arranged logistics channel adjusting each company's global strategy, 2) the construction of worldwide real time logistics information system, 3) the reengineering of all logistics procedures such as order processing, shipping, inventory control, etc., 4) the enhancement of the ratio of the supply from the external companies and the internal manufacturing subsidiaries at each continent, 5) and the pursuit of operational internalization of external subcontractors.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.8
• /
• pp.23-28
• /
• 2015

TPSN(Timing-sync Protocol for Sensor Networks), the representative of time synchronization protocol for WSN(wireless sensor networks), was developed to provide higher synchronization accuracy and energy efficiency. So, TPSN's approach has been referenced by so many other WSN synchronization schemes till now. However, TPSN has a collision problem due to simultaneous transmission among competing nodes, which causes more network convergence delay for a network-wide synchronization. A Polling-based scheme for TPSN is proposed in this paper. The proposed scheme not only shortens network-wide synchronization time of TPSN, but also reduce collision traffic which lead to needless power consumption. The proposed scheme's performance has been evaluated and compared with an original scheme by simulation. The results are shown to be better than the original algorithm used in TPSN.