• Journal of Navigation and Port Research
• /
• v.43 no.6
• /
• pp.429-436
• /
• 2019

The eLoran system is considered the best alternative because the vulnerability of satellite navigation systems cannot be resolved as perfect. Thus, South Korea is in the process of establishing a testbed of the eLoran system in the West Sea. To provide resilient navigation services to all waters, additional eLoran transmitters are required. However, it is difficult to establish eLoran transmitters because of various practical reasons. Instead, the positioning with NDGNSS/AIS source can expand the coverage and its algorithm with applying continuous waves is under development. Using the already operating NDGNSS reference station and the AIS base station, it is possible to operate the navigation system with higher accuracy than before. Thus, it is crucial to predict the performance when each system is integrated. In this paper, we have developed a simulation tool that can predict the performance of terrestrial integrated navigation system using the eLoran system, maritime NDGNSS station and the AIS station. The esitmated phase error of the received signal is calculated with the Cramer-Rao Lower Bound factoring the transmission power and the atmospheric noise according to the transmission frequency distributed by the ITU. Additionally, the simulation results are more accurate by estimating the annual mean atmospheric noise of the 300 kHz signal through the DGPS signal information collected from the maritime NDGNSS station. This approach can further increase the reliability of simulation results.

• Journal of the Korean Institute of Oriental Medical Informatics
• /
• v.20 no.1
• /
• pp.25-156
• /
• 2014

This thesis is consisted of studying of the medical literature about Five sense of organs. Five sense of organs are the eyes, tongue, mouth, nose and ears. Five sense of organs are performed human senses which external sensory information by accepting an important feature for maintaining the biological activity to be performed. The contents was compiled up to the Donguibogam to Chinese literature and documents encompass the Korea medical literature, Donguibogam related to the senses to identify the citation of each chapter, the actual quotation through doctrine and other publications revealed that the citation is to investigate how accurately identified through studying the analysis and observation. It is as following as I observed carefully the senses of Donguibogam quotations related to each other through doctrine and publishment institution follows in order of dynasties. There are four volumes of Han-dynasty, one volume of Weijinnanbei-Era, two volumes of Tang-dynasty, nineteen volumes of SongJinYuan-dynasty, seven volumes of Ming-dynasty as Chinese medical literature. There are four volumes of Chosun-dynasty as Korean medical literature. It is the most quotation publishment that the books of SongJinYuan-dynasty of above thirty-six-volume. It is the latest quotation book that is Gujinyigan in Chinese medical literature and Euirimchwalyo in Korean medical literature. It is very positive quotation considering even Donguibogam publishment year in 1613. The reference books are four volumes of Chosun-dynasty as Korean medical literature and thirty-two-volume of Chinese medical literature. By observing the quotation frequency, 157 times in Sheyideaiofang, 115 times in Yixuerumen, 74 times in Yixuegangmu, 39 times in Wanbinghuichun, 31 times in Euibangryuchwi, 30 times in Renzhezhizhifang and Gujinyigan, 28 times in Danxixinfafuyu, 23 times Hwangdineijing, 17 times in Nanshibizang and Yixuezhengchuan. Other else books have been cited less than 10 times. It might be made error that did not find the source of the books even though cited reference, also even though defining the source of reference it is only rare reference book. As mention above, there are a lot of discovering as the feature of reference Publications. Most of all we could find out the reference literature cited in Donguibogam, however we couldn't clarify other books in original books. Thus, we should remember that it did not coincide with cited marks when studying the Donguibogam.

• The KIPS Transactions:PartD
• /
• v.11D no.5
• /
• pp.1011-1020
• /
• 2004

A lot of work has been done to improve the I/O performance of such a system that store and manage a massive amount of data by distributing them across multiple disks and access them in parallel. Most of the previous work has focused on an efficient mapping from a grid ceil, which is determined bY the interval number of each dimension, to a disk number on the assumption that each dimension is split into disjoint intervals such that entire data space is GRID-like partitioned. However, they have ignored the effects of a GRID partitioning scheme on declustering performance. In this paper, we enhance the performance of mapping function based declustering algorithms by applying a good GRID par-titioning method. For this, we propose an estimation model to count the number of grid cells intersected by a range query and apply a GRID partitioning scheme which minimizes query result size among the possible schemes. While it is common to do binary partition for high-dimensional data, we choose less number of dimensions than needed for binary partition and split several times along that dimensions so that we can reduce the number of grid cells touched by a query. Several experimental results show that the proposed estimation model gives accuracy within 0.5% error ratio regardless of query size and dimension. We can also improve the performance of declustering algorithm based on mapping function, called Kronecker Sequence, which has been known to be the best among the mapping functions for high-dimensional data, up to 23 times by applying an efficient GRID partitioning scheme.

• The KIPS Transactions:PartB
• /
• v.14B no.7
• /
• pp.493-502
• /
• 2007

An on-line registration technique is presented to register multi-view range images for the 3D reconstruction of real objects. Using a range camera, we first acquire range images and photometric images continuously. In the range images, we divide object and background regions using a predefined threshold value. For the coarse registration of the range images, the centroid of the images are used. After refining the registration of range images using a projection-based technique, we use a modified KLT(Kanade-Lucas-Tomasi) tracker to match photometric features in the object images. Using the modified KLT tracker, we can track image features fast and accurately. If a range image fails to register, we acquire new range images and try to register them continuously until the registration process resumes. After enough range images are registered, they are integrated into a 3D model in offline step. Experimental results and error analysis show that the proposed method can be used to reconstruct 3D model very fast and accurately.

• The KIPS Transactions:PartA
• /
• v.16A no.3
• /
• pp.169-180
• /
• 2009

With fixed sinks, the network stability could be improved while the network life time could be decreased by the rapid energy dissipation around the fixed sink because of the concentrated network traffic from sensor nodes to the fixed sink in wireless sensor network. To address this problem, mobile sinks, which decentralize the network traffic, has received a lot of attention from many researchers recently. Since a mobile sink has a limited period to communicate with each sensor nodes, it is necessary for a scheduling algorithm to provide the fairness of data collection from each sensor nodes. In the paper, we propose the new scheduling algorithm, ASF(Availability based Scheduling scheme for Fair data collection), for the fair data collection by a mobile in the sensor networks. The ASF takes account of the distance between each sensor nodes and the mobile sink as scheduling metric, as well as the amount of collected data from each sensor nodes. Experiment results shows that the ASF improves the fairness of data collection among the sensor nodes, comparing to existing algorithm.

• Journal of the Korean Society for Railway
• /
• v.10 no.6
• /
• pp.685-691
• /
• 2007

In this paper through Honan high-speed railroad which is planned with the north and south axis, we will verify the feasibility of the coordinate conversion using railroad control points after regarding current planned-railroad as the linear central axises. From analysis, distortion of Y axis varies 21 cm to 40 cm diminishing to a gentle straight line, distortion of X axis varies 14 cm to 29 cm. Through a revision, the deviation value between the coordinates were 6 mm to 9 mm and it satisfied the allowable error of national geographic information institute which is following ITRF (International Terrestrial Reference Frame) and cadastral boundary survey (10 cm). consequently the coordinate conversion is possible using railroad control points as common control points.

• Journal of Cadastre & Land InformatiX
• /
• v.47 no.1
• /
• pp.143-160
• /
• 2017

Since officially assessed land price system was introduced, it has functioned as the criterion for establishing and implementing real estate policies. However, there is a controversial issue about the adequacy of the officially assessed land price system. The problem is that it is difficult to establish a statistical model due to too many land characteristics. Also, local economy, macroeconomic environments and development plans are not reflected in the land price evaluation model. Considering longitudinal and cross-sectional variables, a two-way error component panel model was used in this study. This analysis model includes variables reflecting land characteristics, macroeconomic volatility, and development project. The Paju LCD Industrial Complex was selected as a analysis area and an empirical analysis was performed. According to the analysis, the number of significant land characteristic variables were 14(31%) under 5% significance level. Macroeconomic volatility has had an influence on the land price and year variable reflecting development project has consistently been significant since the industrial complex was designated. Therefore, this study suggests that the land price evaluation model should be improved by simplifying land characteristic variables and including macroeconomic and regional economic variables.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.3 s.333
• /
• pp.25-34
• /
• 2005

In this paper, we analyzed and measured the electrical crosstalk characteristics of a triplex transceiver module for ethernet Passive optical networks(EPONS). And we improved the electrical crosstalk levels using Dummy ground lines with signal lines. The triplex transceiver module consists of a laser diode as a transmitter, a digital photodetector as a digital data receiver, and a analog photodetector as a community antenna television signal receiver. And there are integrated on silicon substrate. The digital receiver and analog receiver sensitivity have to meet -24 dBm at $BER=10^{-l2}$ and -7.7 dBm at 44 dB SNR. And the electrical crosstalk levels have to maintain less than -86 dB from DC to 3 GHz. From analysis and measurement results, the proposed silicon substrate structure that contains the Dummy ground line with $100\;{\mu}m$ space from signal lines and separates 4 mm among devices respectively, is satisfied the electrical crosstalk level compared to simple structure. This proposed structure can be easily implemented with design convenience and greatly reduced the silicon substrate size about $50\%$.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.11 no.1
• /
• pp.91-99
• /
• 2000

Objectives：Present study developed the computerized ADHD Diagnostic System(ADS) in order to diagnose ADHD and evaluate treatment effect of it, and conducted a standardization study for ADS. Methods：The normative group was composed of 847 children and adolescents between the age of 5 and 15(boy 429, girl 418) living in the areas of Seoul, Kyunggi-do, and Kangwon-do. 30 ADHD children with age ranged 7 to 9 years were participated present study to evaluate the validity of ADS. To establish the norms for diagnosing ADHD, the means and standard deviations of normative group were used to calculate T-scores for each age group. Results：The reliability coefficient of ADS(Cronbach's ${\alpha}$) was .85. There were significant differences in the measures of ADS except commission error between the normal and the ADHD groups. Three factors were extracted through factor analysis of ADS, which were labelled 'inattention', 'slow information processing' and 'impulsivity'. Discriminant analysis showed that ADS significantly discriminate the normal and the ADHD groups. Percentage of correct classification by ADS variables was 96.7%. Conclusion：These results put together strongly support the reliability and validity of ADS as a diagnostic instrument for ADHD.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.10 s.352
• /
• pp.80-89
• /
• 2006

The rapid development of process technology and the introduction of new materials not only make it difficult for process control but also as a result increase process variations. These process variations are barriers to successful implementation of design circuits because there are disparities between data on layout and that on wafer. This paper proposes a new design environment to determine the interconnect worstcase with accuracy and speed so that the interconnect effects due to process-induced variations can be applied to designs of $0.13{\mu}m$ and below. Common Geometry and Maximum Probability methods have been developed and integrated into the new worstcase optimization algorithm. The delay time of the 31-stage Ring Oscillator, manufactured in UMC $0.13{\mu}m$ Logic, was measured, and the results proved the accuracy of the algorithm. When the algorithm was used to optimize worstcase determination, the relative error was less than 1.00%, two times more accurate than the conventional methods. Furthermore, the new worstcase design environment improved optimization speed by 32.01% compared to that of conventional worstcase optimizers. Moreover, the new worstcitse design environment accurately predicted the worstcase of non-normal distribution which conventional methods cannot do well.