• 제목/요약/키워드: Influence Zone

검색결과 882건 처리시간 0.028초

천해역에 위치한 바지형 부유체의 계류시스템 설계 (The Design Development on the Mooring System of a Floating Barge Positioned in the Shallow Water Zone)

  • 김영복
    • 한국해안·해양공학회논문집
    • /
    • 제27권5호
    • /
    • pp.364-371
    • /
    • 2015
  • 본 연구는 험한 해양환경하에서 천해역에 떠 있는 부유체 해양양식장의 동적 거동 해석기법을 연구하기 위해 시도되었다. 본 연구의 내용은 양식장의 설치 위치를 연안이 아닌 근해지역으로 옮겼을 때 파도의 영향과 함께 계류라인이 해저면에 설치된 영향, 즉 해저면의 영향이 많은 영향을 미칠 것이라는 타 논문에서 발표된 사실을 밝히기 위해 수치해석 프로그램을 개발한 내용이며, 이를 통해 천해역에 설치된 계류라인과 해양 양식장을 모형화한 부유체 바지의 연성된 동적 응답해석을 수행할 때 해저면의 강성을 고려할 수 있는 프로그램을 확보하게 되었다.

Al5083-O GMA 용접시 불활성가스 혼합비가 용접부의 인성에 미치는 영향에 관한 연구 (The Influence of Shield Gas Ratio on the Toughness of Al5083-O GMA Welding Zone)

  • 이동길;조상곤;김건호
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제26권6호
    • /
    • pp.653-660
    • /
    • 2002
  • In this study, the toughness was evaluated by using the instrumented Charpy impact testing procedures for A15083-O aluminum alloy used in the LNG carrying and storing tank. The specimens were GMAW welded with four different mixing shield gas ratios (Ar100%+He0%, Ar67%+He33%, Ar50%+He50%, and Ar33%+He67%), and tested at four different temperatures(+25, -30, -85, and $-196^{\circ}C$) in order to investigate the influence of the mixing shield gas ratio and the low temperature. The specimens were divided into base metal, weld metal, fusion line, and HAZ specimen according to the worked notch position. From experiment, the maximum load increased a little up to -$85^{\circ}C$ , and the maximum load and maximum displacement were shown the highest and the lowest at -$196^{\circ}C$ than the other test temperatures. The absorption energy of weld metal notched specimens was not nearly depends on test temperature and mixing shield gas ratio because the casting structure was formed in weld metal zone. In the other hand, the other specimens were shown that the lower temperature, the higher absorption energy slightly up to $-85^{\circ}C$ but the energy was decreased so mush at $-196^{\circ}C$.

원자로 노심용융물의 성분비 변화가 증기폭발에 미치는 영향 (An Influence of Corium Composition Variations on a Spontaneous Steam Explosion in Severe Accidents in a Nuclear Reactor)

  • 김종환;박익규;홍성완;민병태;송진호;김희동
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2004년도 춘계학술대회
    • /
    • pp.2041-2046
    • /
    • 2004
  • Recently series of steam explosion experiments have been performed in the TROI facility to identify the influence of corium compositions on the occurrence of a spontaneous steam explosion varying corium melt composition. The compositions of the corium were 0 : 100, 50 : 50, 70 : 30, 80 : 20 and 87 : 13 at weight percent of $UO_2$ to $ZrO_2$, and the mass of the corium was about 10kg. Corium melt at 0 : 100 weight percent (pure zirconia) caused a strong spontaneous steam explosion, and melt at 70 : 30 weight percent(eutectic corium) led to a weak steam spike, while melts at other compositions did not result in spontaneous steam explosions, when they came into contact with 67cm deep water pool at room temperature. It seems that the explosivity of pure zirconia is stronger than that of corium at other compositions and a steam explosion is not likely to occur with corium melts at non-eutectic compositions which are included in mushy zone region.

  • PDF

터널 3차원 절대변위 해석기법을 이용한 막장전방지반 예측 (Prediction of Ground Condition Changes Ahead of Tunnel Face Using Three-Dimensional Absolute Displacement Analysis)

  • 방준호;한일영
    • 한국터널지하공간학회 논문집
    • /
    • 제8권2호
    • /
    • pp.101-113
    • /
    • 2006
  • 안정된 암반에 터널을 굴착하는 경우 아칭효과에 의해 막장주변에 응력재배치가 발생하고 터널 막장 전방에 연약대가 존재하는 경우 응력재배치가 충분히 이루어지지 않아 막장과 연약대 사이의 응력집중으로 인해 변위가 발생하게 된다. 만일 막장에 근접하여 측점에서 종방향, 횡방향, 연직방향의 3차원 절대좌표가 측정되는 경우 막장전방의 지반거동이 반영된 3차원 절대변위가 산정되고, 이러한 3차원 절대변위의 분석을 통해 막장전방의 지반조건을 예측할 수 있게 된다. 본 연구에서는 4개 현장에서 측정된 3차원 변위비의 경향선과 천단침하의 영향선/경향선 분석을 실시하여 연약대 위치를 추정하였고, 3차원 절대변위의 분석에 의해 추정된 연약대 위치를 동일한 구간에서의 TSP탐사로 추정된 연약대 위치와 비교함으로써 3차원 절대변위 해석기법의 현장 적용성을 검증하였다.

  • PDF

Influence of Residential Environment and Lifestyle on Multiple Primary Malignancies in Taiwan

  • Chang, Chih-Chun;Chung, Yi-Hua;Liou, Ching-Biau;Lee, Yi-Chen;Weng, Wei-Ling;Yu, Yun-Chieh;Yen, Tzung-Hai;Wu, Jiann-Ming
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제16권8호
    • /
    • pp.3533-3538
    • /
    • 2015
  • Background: Multiple primary malignancies (MPM) have become increasingly prevalent worldwide. This investigation was aimed at establishing the clinicopathological characteristics of MPM patients and evaluating the impact of the living environment on MPM in the Taiwanese population. Materials and Methods: From January 2009 to December 2013, a total of 8,268 cancer patients were identified in our institutional center. Of these, 125 were diagnosed as MPM and thus enrolled. Data for clinicopathological features and treatment approaches for these MPM patients living in urban or suburb zone were obtained. Findings for the air pollution status in Taiwan were also collected. Results: The most common cancer match of MPM was esophageal cancer with hypopharyngeal cancer (12.8%), followed by colorectal cancer with gastric cancer (6.4%) and colorectal cancer with breast cancer (5.6%). The air quality was significantly worse in the urban than in the suburban zone and there was a remarkably higher portion of MPM patients in the urban zone suffering from grade III and IV post-chemotherapeutic neutropenia (30.8% vs 15.1%, P=0.036). Conclusions: The tumor frequency and site distribution should be taken into the clinical evaluation because there is a relatively high risk of developing MPM. This study also highlighted the potential influence of environmental factors on post-chemotherapeutic neutropenia for patients with MPM.

지하처분연구시설에 대한 3차원 터널 안정성 해석 (Three-dimensional Stability Analysis for an Underground Disposal Research Tunnel)

  • 권상기;조원진
    • 터널과지하공간
    • /
    • 제14권3호
    • /
    • pp.188-202
    • /
    • 2004
  • 고준위폐기물의 처분개념 실증을 위해 원자력연구소부지 내에 지하연구시설을 건설하는 경우, 지표면지형의 변화, 두터운 풍화대의 존재가 예상된다. 본 연구에서는 부지 특성과 터널의 경사 및 터별의 크기에 따른 영향 분석과 함께 수백 m의 터널을 단계적으로 굴착하는데 따른 영향을 FLAC3D를 이용한 3차원 구조해석을 통해 분석하였다. 해석결과 굴착을 단계적으로 실시하는데 따르는 응력이나 변위분포에는 차이가 없는 것으로 나타났으며 이는 지하연구시설의 부근에서는 응력재분포에 의한 소성영역의 발생은 없기 때문이다. 최대 응력으은 5 ㎫로 압축응력이 작용할 것으로 예상된다. 최대응력은 터별의 끝 부분에서 20 m 전방으로 터별의 벽면에서 발생할 것으로 예상되며 터널 경사각이나 풍화대의 크기, 터널의 크기변화에 따른 터널에서의 응력과 변위분포 변화는 거의 없는 것으로 나타났다. 진입터널과 연구모듈의 교차지점에 대한 모델링 결과 응력비 K가 3인 경우 구조적으로 가장 취약한 지점에서의 안전계수가 3이상으로 나타난다. 본 연구를 통해 원자력연구소 내 예상 부지에 소규모 지하연구시설을 구조적으로 안전하게 건설하는 것이 가능함을 보일 수 있었다.

위성자료를 이용한 동해안 냉수대의 시공간적 변화 분석 연구 (Study on the temporal and spatial variation in cold water zone in the East Sea using satellite data)

  • 윤석;양현
    • 대한원격탐사학회지
    • /
    • 제32권6호
    • /
    • pp.703-719
    • /
    • 2016
  • 이 연구는 여름철 동해안 냉수대의 시공간적 이동에 따른 변화 분석에 관한 것이다. 2013년 여름에 위성 및 현장자료(바람, 기온, 수온)를 이용하여 다양한 환경 요인들에 기반을 둔 자료 분석을 시도하였다. 냉수대의 생성과 소멸의 영상을 분석하기 위해 AVISO 지형류 및 하루 동안의 천리안 해양관측위성(Geostationary Ocean Color Imager; GOCI) 엽력소 농도 자료를 사용하였다. 또한, 냉수대의 이동을 추적하기 위해 Advanced Very High Resolution Radiometer-Sea Surface Temperature (AVHRR-SST) 자료를 사용하였다. 초여름에 냉수대가 발현하여 늦여름에 소멸한다는 것과 이 기간 동안 냉수대의 생성과 소멸이 지속적으로 반복되었다는 것을 확인할 수 있었다. 추가적으로 냉수대의 후속 영향으로 인해 늦여름에 엽력소 농도가 증가되었다는 것을 확인할 수 있었다.

펄스 레이저 조사 후 알루미늄 합금의 표면상태에 대한 표면 거칠기의 영향 (Influence of Surface Roughness on Morphology of Aluminum Alloy After Pulsed-Laser Irradiation)

  • 최성호;김정석;장경영;신완순
    • 대한기계학회논문집A
    • /
    • 제35권9호
    • /
    • pp.1105-1111
    • /
    • 2011
  • 본 연구의 목적은 Nd:YAG 펄스레이저 조사 후 알루미늄 합금 6061-T6 시편의 표면상태에 대한 표면 거칠기의 영향을 연구하는 것이다. 초기 표면 거칠기를 다르게 하기 위해 다아이몬드 입자($1{\mu}m$)와 연마지(#100, #220, #600, #2400)를 이용하여 표면을 가공하였다. 10 번의 펄스레이저를 조사한 후 주사전자현미경과 광학현미경 그리고 원자현미경을 이용하여 표면상태를 관찰하였다. 그 결과 표면 거칠기가 증가할수록 용융부의 지름이 증가하였는데, 이는 표면 거칠기에 따라 표면부에서 레이저 빔의 다중반사와 다중흡수가 일어나 레이저 빔의 흡수율이 변하기 때문이다. 이를 검증하기 위해 용융부의 지름으로부터 표면 거칠기에 의해 증가하는 상대적인 흡수율을 계산하였으며 평균 표면 거칠기가 증가함에 따라 상대적인 흡수율이 용융부의 지름과 유사한 형태로 증가하는 것을 보였다.

수정변형률 영향계수에 근거한 직사각형 및 복합 얕은기초 침하량 산정법 (Improved Strain Influence Diagram and Settlement Estimation for Rectangular and Multiple Footings in Sand)

  • 박동규;이준환
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2005년도 춘계 학술발표회 논문집
    • /
    • pp.633-640
    • /
    • 2005
  • Most existing methods for the footing settlement estimation are for either isolated or strip footings. No sufficient details are available for settlement calculation of footings with different shapes and multiple footing conditions, which are commonly adopted in actual construction projects. In this paper, estimation of footing settlements for various footing conditions of different shapes and multiple conditions is investigated based on Schmertmann's method with focus on values of the strain influence factor $I_z$. In order to examine the effect of multiple footing conditions, field plate load tests are performed in sands using single and double plates. 3D non-linear finite element analyses are also performed for various footing conditions with different footing shape and distance ratios. Results obtained in this study indicate that there are two significant components in the strain influence diagram that need to be taken into account for settlement estimation of rectangular and multiple footings: depth of $I_{zp}$ and depth of strain influence zone. Based on results from experimental and 3D non-linear finite element analyses, improved strain influence diagrams available for various footing conditions are proposed.

  • PDF

난적잠제 상부 사석의 안정에 관한 실험적 연구 (The Stability Riprap on Scattered Submerged Breakwater due to Physical Model)

  • 박상길;김우생;이재성;김성훈
    • 한국해양공학회지
    • /
    • 제24권1호
    • /
    • pp.106-115
    • /
    • 2010
  • This study described the stability of riprap, which was examined by a two-dimensional physical model of a scattered riprap submarine breakwater. Artificial reef structures made of scattered riprap are used like artificial intertidal zone structures as waterfront seaside structures. To prevent topography change in such an artificial intertidal zone the energy is reduced at the scattered riprap submarine breakwater by intercepting high waves. The breaking waves are converted into flow on the front surface slope of the submarine breakwater, which follows the upper part of the artificial intertidal zone. Because of this phenomenon of resisting water flow, it is very important to calculate the required weight of the riprap to maintain its stability. The results of a physical model can be abstracted as shown below. First, distribute the wave breaking types occurring on the front surface slope of the submarine breakwater and arrange it in relation to the movement of riprap. Second, using the hydraulic phenomenon that occurs at the depth of the scattered riprap submarine breakwater, propose a calculation formula for the velocity distribution showing the influence on the stability of the riprap. Third, propose and compare values, which can be obtained by experiments and calculations for riprap stability on the front surface of the artificial intertidal zone. Fourth, calculate the required weight for riprap stability.