• The Academic Congress of Korean Shoulder and Elbow Society
• /
• 2004.11a
• /
• pp.129-135
• /
• 2004

만약 Glenoid side를 해부학적으로 정확하게 치환하고, 상완골측의 prosthesis를 삽입할 때 실제 골두의 크기와 같은 prosthetic head를 쓰고, humeral stem의 위치 및 높이를 정확하게 맞추어 삽입하여, humeral head component의 center와 glenoid component의 center가 일치되고 lateral glenohumeral offset이 정상에 가깝게 수술을 시행하면 인공 치환물로 대치된 glenohumeral joint가 정상에 가장 가까운 kinematics를 가질 수 있다 (당연한 얘기지만 이렇게 수술하려면 많은 경험이 필요). 따라서 Glenohumeral joint의 인공 관절 치환술은 항상 technique-dependant 수술이며, 아무리 좋은 치환물도 훌륭한 수술 기법보다 더 중요할 수는 없다.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.10
• /
• pp.20-26
• /
• 1993

The base-collector capacitance of an npn bipolar transistor in bipolar or BiCMOS technology has significant influence on the switching performances, and comprises pnjunction component and MOS component. Both components have complicated dependences on the isolation oxide structure, epitaxial doping density, and bias voltage. Analytical/empirical formulas for both components are derived in this paper for a generic isolation structure as a function of epitaxial doping density and bias voltage based on some theoretical understanding and two-dimensional device simulations. These formulas are useful in estimating the effect of device isoation schemes on the switching speed of bipolar transistors.

• Wind and Structures
• /
• v.34 no.2
• /
• pp.185-197
• /
• 2022

This study aimed to analyze the wind-induced mechanical energy (WME) of a proposed super high-rise and long-span transmission tower-line system (SHLTTS), which, in 2021, is the tallest tower-line system with the longest span. Anew index - the WME, accounting for the wind-induced vibration behavior of the whole system rather than the local part, was first proposed. The occurrence of the maximum WME for a transmission tower, with or without conductors, under synoptic winds, was analyzed, and the corresponding formulae were derived based on stochastic vibration theory. Some calculation data, such as the drag coefficient, dynamic parameters, windshielding areas, mass, calculation point coordinates, mode shape and influence function, derived from wind tunnel testing on reducedscale models and finite element software were used in calculating the maximum WME of the transmission tower under three cases. Then, the influence of conductors, wind speed, gradient wind height and wind yaw angle on WME components and the energy transfer relationship between substructures (transmission tower and conductor) were analyzed. The study showed that the presence of conductors increases the WME of transmission towers and changes the proportion of the mean component (MC), background component (BC) and resonant component (RC) for WME; The RC of WME is more susceptible to the wind speed change. Affected by the gradient wind height, the WME components decrease. With the RC decreasing the fastest and the MC decreasing the slowest; The WME reaches the its maximum value at the wind yaw angle of 30°. Due to the influence of three factors, namely: the long span of the conductors, the gradient wind height and the complex geometrical profile, it is important that the tower-line coupling effect, the potential for fatigue damage and the most unfavorable wind yaw angle should be given particular attention in the wind-resistant design of SHLTTSs

• Earthquakes and Structures
• /
• v.25 no.2
• /
• pp.89-97
• /
• 2023

In order to obtain the impact of socket connection interface forms and socket gap sizes on the seismic performance of reinforced concrete (RC) socket prefabricated bridge piers, quasi-static tests for three socket prefabricated piers with different column-foundation connection interface forms and reserved socket gap sizes, as well as to the corresponding cast-in-situ reinforced concrete piers, were carried out. The influence of socket connection structure on various seismic performance indexes of socket prefabricated piers was studied by comparing and analyzing the hysteresis curve and skeleton curve obtained through the experiment. Results showed that the ultimate failure mode of the socket prefabricated pier with circumferential corrugated treatment at the connection interface was the closest to that of the monolithic pier, the maximum bearing capacity was slightly less than that of the cast-in-situ pier but larger than that of the socket pier with roughened connection interface, and the displacement ductility and accumulated energy consumption capacity were smaller than those of socket piers with roughened connection interface. The connection interface treatment form had less influence on the residual deformation of socket prefabricated bridge piers. With the increase in the reserved socket gap size between the precast pier column and the precast foundation, the bearing capacity of the prefabricated socket bridge pier component, as well as the ductility and residual displacement of the component, would be reduced and had unfavorable effect on the energy dissipation property of the bridge pier component.

• KIPS Transactions on Software and Data Engineering
• /
• v.10 no.3
• /
• pp.79-84
• /
• 2021

A feature extraction method capable of reflecting features well while mainaining the properties of data is required in order to process high-dimensional data. The principal component analysis method that converts high-level data into low-dimensional data and express high-dimensional data with fewer variables than the original data is a representative method for feature extraction of data. In this study, we propose a principal component analysis method based on adaptive correlation when selecting principal component variables in principal component analysis for data feature extraction when the data is high-dimensional. The proposed method analyzes the principal components of the data by adaptively reflecting the correlation based on the correlation between the input data. I want to exclude them from the candidate list. It is intended to analyze the principal component hierarchy by the eigen-vector coefficient value, to prevent the selection of the principal component with a low hierarchy, and to minimize the occurrence of data duplication inducing data bias through correlation analysis. Through this, we propose a method of selecting a well-presented principal component variable that represents the characteristics of actual data by reducing the influence of data bias when selecting the principal component variable.

• Journal of Forest and Environmental Science
• /
• v.18 no.1
• /
• pp.87-96
• /
• 2001

In order to investigate the influence of increased seed production of Korean white pine(Pinus koraiensis S. et Z.), component of seeds, produced from trees in the thinned stand and the stem-pruned trees in the seed orchard, were analyzed. The results obtained were as follows: 1. General component analysis of seed There is no significant influence of thinning on the seed component in moisture content (thinned- 4.10%, unthinned- 3.74% ), ash (thinned- 2.95%, unthinned- 2.94%), crude lipid (thinned- 67.62%, unthinned- 71.94%), and crude protein (thinned- 17.27%, unthinned- 17.50%). There is no significant influence of stem-pruning on the seed component in moisture content (unpruned- 4.26%, 1m stem-pruned- 4.10%, and 2m stem-pruned- 3.99%), ash (unpruned- 2.08%, 1m stem-pruned- 2.09%, and 2m stem-pruned- 2.15%) crude lipid(unpruned- 68.59%, 1m stem-pruned- 69.52%, and 2m stem-pruned- 72.53%), and crude protein (unpruned- 18.13%, 1m stem-pruned- 17.96%, and 2m stem-pruned- 17.56%) 2. Fatty acid analysis Seeds of tree from thinned and unthinned stands contained two essential fatty acids, i.e., linoleic acid (18:2) (thinned- 54.92%, unthinned- 55.40%) and linolenic acid (18:3) (thinned- 0.19%, and unthinned- 0.23%). Over 94% of fatty acids consisted of linoleic acid (18:2)(55%), oleic acid (18:1) (32%), and palmitic acid (16:0)(7%). T-test showed difference of content at 1% significance level for palmitoleic acid (16:1), stearic acid (18:0) and 8.11, 14-eicosatrienoic acid (20:3) and at 5% for linolenic acid (18:3), but no significant difference for three major fatty acids mentioned above, between two types of trees. Thus thinning may give no influence in fatty acid content. Seeds of three types of trees contained two essential fatty acids, i.e., linoleic acid (18:2)(unpruned- 55.25%, 1m stem-pruned- 54.74%, and 2m stem-pruned- 55.00%), and linolenic acid (18:3)(0.21% for three kinds of trees). Linoleic acid (18:2)(55%), oleic acid (18:1) (32%), and palmitic acid (16:0)(6%) consisted of more than 93% of all fatty acid content. At 5% significance level in F-test, difference was observed in the content of palmitoleic acid (16:1) and 8.11, 14-eicosatrienoic acid (20:3), but not in three major types of fatty acids above mentioned. It is observed that stem-pruning gave no significant influence in fatty acid content in general.

• The Korean Journal of Applied Statistics
• /
• v.7 no.1
• /
• pp.69-74
• /
• 1994

Kim (1992) derived influence functions of rows and columns on the eigenvalues obtained in correspondence analysis (CA) of two-way contingency tables. As in principal component analysis, the eigenvalues are of great importance in CA. The goodness of a two dimensional correspondence plot is determined by the ratio of the sum of the two largest eigenvalues to the sum of all the eigenvalues. By investigating those rows and columns with high influence, a correspondence plot may be improved. In this paper, we extend the influence functions of CA to multiple correspondence analysis (MCA), which is a CA of multi-way contigency tables. An explicit formula of the influence function is given.

• Structural Engineering and Mechanics
• /
• v.70 no.2
• /
• pp.169-178
• /
• 2019

The replacement of damaged components is an important task for long-span bridges. Conventional strategy for component replacement is to close the bridge to traffic, so that the influence of the surrounding environment is reduced to a minimum extent. However, complete traffic interruption would bring substantial economic losses and negative social influence nowadays. This paper investigates traffic control technologies without interruption for component replacement of long-span bridges. A numerical procedure of traffic control technologies is proposed incorporating traffic microsimulation and site-specific data, which is then implemented through a case study of cable replacement of a long-span cable-stayed bridge. Results indicate traffic load effects on the bridge are lower than the design values under current low daily traffic volume, and therefore cable replacement could be conducted without traffic control. However, considering a possible medium or high level of daily traffic volume, traffic load effects of girder bending moment and cable force nearest to the replaced cable become larger than the design level. This indicates a potential risk of failure, and traffic control should be implemented. Parametric studies show that speed control does not decrease but increase the load effects, and flow control using lane closure is not effectual. However, weight control and gap control are very effective to mitigate traffic load effects, and it is recommended to employ a weight control with gross vehicle weight no more than 65 t or/and a gap control with minimum vehicle gap no less than 40 m for the cable replacement of the case bridge.

• Journal of Sericultural and Entomological Science
• /
• v.6
• /
• pp.34-38
• /
• 1966

This experiment was to find out the exact amount of iron component in filature water affecting or the coloring and iron component content in the raw silk after the quantitative analysis of iron component in the filature water, cocoon bave and raw silk. 1. In Korea the extent of iron component in filature water is 0.01-0.77 PPM, and the average amount is 0.23 PPM. 2. The sample water from wells contains more than twice as much iron component as the river water. 3. The iron component content in the cocoon bave (Fe$_2$O$_3$ 0.0096%) and that in the raw silk (Fe$_2$O$_3$ 0.0084%) are similar. But it should be noticed that while the ash content in cocoon bave is twice as much as raw silk, the same amount of ash in raw silk has twice as much iron component as the cocoon bave. 4. The amount of iron component in filature water has great effect on the resolution and absorption of iron component contained in the raw silk during cooking and reeling. That is, when the amount of iron component is small, the rate of iron component resolution from the cocoon bave increases and finally the raw silk comes to contain much less iron component than the cocoon bave, but when the iron component amount is over 0.40 PPM, the raw silk happens to contain more iron component than the cocoon bave. 5. The iron component in filature water makes the raw silk grayish and the more the iron component, the grayer the raw silk. 6. While even very small amount of iron component can affect the depth of raw silk, relatively large amount of Mn component does not have so much influence on the coloring.

• Journal of environmental and Sanitary engineering
• /
• v.8 no.2
• /
• pp.155-168
• /
• 1993

The chemical components of rain water and aerosol in Bulkwang of Seoul and Yang-Paying of Kyunggi-do were compared in order to investigate that pollutants at urban area influences rain water and aerosol component. The following is the result of this study. 1) The pH of rain water was shown 4.82 at urban area and 5.69 at suburban area. 2) The mean concentration of $SO_4^{2-}$ within rain water at suburban was nearly the same at urban area but the mean concentration of $Na^{+},Ca^{2+},Mg^{2+}$ and $NH_4^{2+}$ at suburban area was higher than the corresponding levels at urban area. 3) The ion component of aerosol at suburban was shown 68% of that at urban area. This study proved that the concentration of rain water and aerosol component was under the influence of movement of air current.