• 중소기업연구
• /
• 제31권2호
• /
• pp.103-120
• /
• 2009

창업보육센터는 창업을 준비하는 예비창업자 및 신규 창업자에게 사업을 영위하는데 필요한 자원 및 서비스를 제공하고, 사업을 수행하는 과정에서 발생되는 다양한 문제의 해결에 도움을 주고 있다. 그러나 이러한 지원은 상황에 따라 기업의 자생력을 높이기보다는 창업보육센터에 대한 의존도를 높이는 경향이 있다. 본 연구는 창업보육서비스를 제공형태에 따라 인프라 지원, 네트워크 연계 지원, 직접 지원으로 분류한 후에 이들 서비스의 제공이 입주기업의 창업보육센터 의존도에 미치는 영향관계를 살펴보고, 아울러 입주기간에 따른 조절효과를 살펴보았다. 연구결과 세 가지 보육서비스 모두 의존도에 영향을 미치는 것으로 파악되었으며, 입주기간에 따른 조절효과는 기간이 늘어날수록 네트워크 연계 지원서비스에 정의 효과가 있는 반면 직접 지원서비스는 부의 효과가 있는 것으로 파악되었다. 이러한 결과는 입주기간이 늘어감에 따라 직접 지원서비스의 경우에는 입주기업이 센터의 자원을 흡수하여 기업의 역량으로 만들어 가지만, 네트워크 연계 지원서비스는 기업의 센터에 대한 의존도를 높이고 있다는 것을 보여준다. 따라서 신생기업이 자생력을 갖기 위해서는 보육서비스를 보육기간에 따라 차별적으로 제공해야 한다는 시사점을 제시하고 있다.

• 대한치과교정학회지
• /
• 제36권5호
• /
• pp.339-348
• /
• 2006

교정용 미니 임플랜트 고정원을 이용한 교정 치료가 보편화되며, SWA와 이를 이용한 on masse sliding retraction 은 임상에서 흔히 사용하는 치료법이 되었다. 그러나 고정원을 성공적으로 보존하려는 노력에 비해, 발치 공간 폐쇄시 전치부 치축 조절에 관여하는 요인에 대한 보고는 아직까지 부족한 실정이다. 본 연구에서는 제1소구치를 제거한 상악 치아와 치주 인대 그리고 치조골에 대한 3차원 유한요소 기준모델을 제작하였고, 제1대구치와 제2소구치 사이 주호선 10 mm 상방에 식립된 교정용 미니 임플랜트를 고정원으로 사용할 경우, 측절치-견치 사이의 견인 훅의 높이를 변화시키며 후상방 견인력을 가하거나, 주호선에 보상 만곡을 부여하는 것이 전치부 치축 조절에 어떤 영향을 미치는지 시뮬레이션 하였다. 또한 전치부 치축이 설측 경사된 모델을 같은 실험 조건으로 시뮬레이션 하여 발치 공간 페쇄 시 설측 경사된 전치부 치축을 유지하거나 개선할 수 있는 요인을 검토하였고, 다음과 같은 연구 결과를 얻었다. 2 mm 높이의 견인 훅에 대하여 후상방으로 견인력을 가할 경우 발생하는 함입력으로 인하여 전치부 설측 경사가 더 감소되지는 않았다. 견인 훅의 높이가 5 mm인 경우 후상방 견인력을 가하면, 측절치의 치관 순측 및 치근 설측 이동이 일어나고, 견치의 비조절성 후방 경사 이동이 심화되었다. 4 mm의 보상 만곡은 측절치의 치관 순측 및 치근 설측 이동을 일으키고, 견치의 비조절성 후방 경사 이동을 감소시켰다. 또한 전치부가 설측 경사된 모델을 기준모델과 같은 실험 조건으로 시뮬레이션 한 경우 치근면의 응력 분포와 25000배 확대된 그래프 상에서의 치아 이동 양상은 매우 유사하였다 이상의 결과는 미니 임플랜트-SWA sliding 생역학을 구사 시 견인 훅의 위치와 와이어 상의 보상 만곡의 유무에 의해 전치부의 치축 조절이 달라지며 실제 임상에서 가이드라인으로 활용될 수 있을 것이다. 따라 수용자들의 적극적 인식도 심화되었다고 결론지을 수 있을 것이다. 신문이 일제의 지배방식에 순응해 독자들에게 내선일체와 전쟁협력을 강요했다는 역사적 평가를 듣게 만들었다.사되었으며 그 다음은 근 현대가 18편으로 26.47%, 중세 7편 10.3%, 선사시대 5편 7.35%, 상고시대가 1편으로 1.47%로 나타나 고대 중세, 근 현대 순으로 선호하는 것으로 나타났다.기인계 농약의 특징인 불안정성에 의해 광분해 및 미생물 분해를 통해 이미 분해가 진행 중이어서 본래의 유기인 화합물이 검출되지 않았을 가능성이 있다. 그리고 유기인계 농약이 완전히 분해되어 생성된 유기인계 농약 기원의 영양염류가 저수지 내로 많은 양이 유입된다면, 부영양화에 기여할 가능성이 있다. 따라서 농업용 저수지에서 유기인계 농약의 농도 분포는 물론이고 중간 생성물과 그 독성, 광분해 및 미생물 분해의 메커니즘, 그리고 최종 산물에 대한 연구가 필요하다.삭감율은 BOD의 경우 Scenario 1-1(처리용량 1,500 $m^3$ $day^{-1}$인 인공습지), scenario 1-2 (처리용량 1,000 $m^3$ $day^{-1}$인 인공습지), scenario 2(면적 4.2ha인 저류지)가 각각 연평균 6.9%, 4.8%, 7.1%의 감소를 보였다. TN은 4.7%, 3.4%, 13.4%의 삭감율을 나타내었으며, TP는 5.6%, 3.9%, 7.3%의 삭감율을 나타내었다. 본 연구에서는 적용하지 못하였으나, 인공습지와 저류지의 적절한 연계시스템을 적용한다면 저감시설 설치 부지면적과 비용의 감소뿐만 아니라 보다 효과적인 수질개선효과를 가져올 수 있으리라 판단된다.다. 이상과 같이 조선시대 주식류의 종류 및 조리방법에 대한 문헌적 고찰을 분석한 결과로 조선시대로부터 현재까지 주식류의 변천과정을 파악할 수 있었으며 새롭게 문헌으로라도 복원된 전통음식인

• 만화애니메이션 연구
• /
• 통권50호
• /
• pp.349-382
• /
• 2018

중국은 다양한 민족의 형성과 아울러 문화의 유구한 역사를 대변하는 문명대국이다.그 중에서도 전통 문화 콘텐츠인 길상 문양은 이데올로기가 격동했던 중국의 역사 변천 과정을 겪으면서 지금까지 중국인들의 민족감성을 자극하는 감성 키워드로 자리잡고 있다. 그 중 길상문양은 중국의 길고 긴 온고지신의 인내를 통해 풍부한 전통문화 콘텐츠의 기반이 되었고, 그러한 감성 문화 자원의 기반아래 하나의 전통 문화 콘텐츠의 중심이 되었다고 해도 과언이 아니다. 길상문양은 중국의 역사와 민족 감성을 대변하는 일종의 표현 수단으로 사람들의 생활관습과 정서, 문화배경에 대한 긴밀한 대변자 역할을 감당하는 키워드가 되었다. 또한, 길상문양은 일종의 마을의 토템신앙의 가치를 지니며 동시에 정보 전달의 기능도 포함하고 있다. 이러한 정보의 상징성은 결국 길상 문양의 형성에 기반이 되었으며, 길상문양이라는 개념적 키워드로 발현하고 있다. 길상문양의 종류는 너무나 다양하여 모든 문양을 연구하기에는 그 범위가 광범위하고 깊어 연구의 전문성에 한계를 가지고 있다. 그래서 본 연구는 길상문양 중에서도 어(魚)문양을 연구한다. 어(魚)문양은 중화민족이 창조한 최초의 길상 서금 문양(동물문:動物紋)이 되었고, 중국에서는 이미 육천년의 역사를 가지게 되었다. 어(魚)문양의 독특한 이미지와 길상의 의미가 중화민족에게는 특유의 고유한 문화 콘텐츠를 보여 주었으며, 중국전통문화를 구성하는 중요한 콘텐츠가 되었다. 전통 어(魚)문양에 대한 현대의 연구는 역사에 대한 상징성과 문양 이미지에 더 많은 의미를 부여하였고, 어(魚)문양의 상징적인 의미로서는 현대적 디자인과 결합시키는 데 신경을 많이 쓰지 않았다. 따라서 어(魚)문양의 길상적 의미와 이미지에 대한 연구를 통해 전통 어(魚)문양이 현대 기업 아이던티티 디자인에 어떠한 가치를 주는지에 대해 분석하고자 하는 것이 본 연구의 목적이다. 연구방법은 중국 전통 어(魚)문의 역사 및 길상이 함의하고 있는 상징성을 연구함으로써 어(魚)문양이 민족, 문화, 예술, 생활 등 각 측면에서 영향을 준 의의와 문화 콘텐츠를 분석하고, 전통 어(魚)문양을 응용한 기업 아이던티티 디자인 사례들을 분석하고자 한다. 또한 소비자의 브랜드 의식, 구매심리, 어(魚)문양의 심리적인 영향력 등에 대한 생각을 파악하고, 더욱 더 어(魚)문양이 기업 아이덴티티 디자인에 대한 영향력을 잘 설명하기 위하여 설문조사도 같이 진행하고자 한다. 조사 대상은 중국 20세 이상의 성인 연령층 총100명의 소비자들이다. 전통 어(魚)문양은 현대적 디자인에 영향을 미친 중요한 구심점이 될 수 있다. 따라서 본 연구는 전통 어(魚)문양을 기업 이미지로 표방한 사례를 통해 분석된 내용들은 대다수 중국인들에게 전통 길상 문양에 대한 긍정적 인식을 제고할 수 있으며, 신뢰성을 바탕으로 한 기업 호감지수에 어떠한 긍정적 영향을 미쳤는지에 대하여 고찰하고자 한다. 현대 중국 기업 아이덴티티 디자인에 있어 길상의 상서로운 이미지를 현대적으로 재해석함으로서 소비자들에게 민족적 감성 인지와 더불어 기업에 대한 이미지의 호감도를 극대화 시키는지에 대한 반응을 설문조사하고, 그 결론을 유추하여 전통컨셉의 활용에 대한 발전가능성을 예측하고자 한다.

• Asia pacific journal of information systems
• /
• 제22권4호
• /
• pp.101-123
• /
• 2012

Currently, Social Media, it has widely a renown keyword and its related social trends and businesses have been fastly applied into various contexts. Social media has become an important research area for scholars interested in online technologies and cyber space and their social impacts. Social media is not only including web-based services but also mobile-based application services that allow people to share various style information and knowledge through online connection. Social media users have tendency to common identity- and bond-attachment through interactions such as 'thumbs up', 'reply note', 'forwarding', which may have driven from various factors and may result in delivering information, sharing knowledge, and specific experiences et al. Even further, almost of all social media sites provide and connect unknown strangers depending on shared interests, political views, or enjoyable activities, and other stuffs incorporating the creation of contents, which provides benefits to users. As fast developing digital devices including smartphone, tablet PC, internet based blogging, and photo and video clips, scholars desperately have began to study regarding diverse issues connecting human beings' motivations and the behavioral results which may be articulated by the format of antecedents as well as consequences related to contents that people create via social media. Social media such as Facebook, Twitter, or Cyworld users are more and more getting close each other and build up their relationships by a different style. In this sense, people use social media as tools for maintain pre-existing network, creating new people socially, and at the same time, explicitly find some business opportunities using personal and unlimited public networks. In terms of theory in explaining this phenomenon, social capital is a concept that describes the benefits one receives from one's relationship with others. Thereby, social media use is closely related to the form and connected of people, which is a bridge that can be able to achieve informational benefits of a heterogeneous network of people and common identity- and bonding-attachment which emphasizes emotional benefits from community members or friend group. Social capital would be resources accumulated through the relationships among people, which can be considered as an investment in social relations with expected returns and may achieve benefits from the greater access to and use of resources embedded in social networks. Social media using for their social capital has vastly been adopted in a cyber world, however, there has been little explaining the phenomenon theoretically how people may take advantages or opportunities through interaction among people, why people may interactively give willingness to help or their answers. The individual consciously express themselves in an online space, so called, common identity- or bonding-attachments. Common-identity attachment is the focus of the weak ties, which are loose connections between individuals who may provide useful information or new perspectives for one another but typically not emotional support, whereas common-bonding attachment is explained that between individuals in tightly-knit, emotionally close relationship such as family and close friends. The common identify- and bonding-attachment are mainly studying on-offline setting, which individual convey an impression to others that are expressed to own interest to others. Thus, individuals expect to meet other people and are trying to behave self-presentation engaging in opposite partners accordingly. As developing social media, individuals are motivated to disclose self-disclosures of open and honest using diverse cues such as verbal and nonverbal and pictorial and video files to their friends as well as passing strangers. Social media context, common identity- and bond-attachment for self-presentation seems different compared with face-to-face context. In the realm of social media, social users look for self-impression by posting text messages, pictures, video files. Under the digital environments, people interact to work, shop, learn, entertain, and be played. Social media provides increasingly the kinds of intention and behavior in online. Typically, identity and bond social capital through self-presentation is the intentional and tangible component of identity. At social media, people try to engage in others via a desired impression, which can maintain through performing coherent and complementary communications including displaying signs, symbols, brands made of digital stuffs(information, interest, pictures, etc,). In marketing area, consumers traditionally show common-identity as they select clothes, hairstyles, automobiles, logos, and so on, to impress others in any given context in a shopping mall or opera. To examine these social capital and attachment, we combined a social capital theory with an attachment theory into our research model. Our research model focuses on the common identity- and bond-attachment how they are formulated through social capitals: cognitive capital, structural capital, relational capital, and individual characteristics. Thus, we examined that individual online kindness, self-rated expertise, and social relation influence to build common identity- and bond-attachment, and the attachment effects make an impact on both the willingness to help, however, common bond seems not to show directly impact on information sharing. As a result, we discover that the social capital and attachment theories are mainly applicable to the context of social media and usage in the individual networks. We collected sample data of 256 who are using social media such as Facebook, Twitter, and Cyworld and analyzed the suggested hypotheses through the Structural Equation Model by AMOS. This study analyzes the direct and indirect relationship between the social network service usage and outcomes. Antecedents of kindness, confidence of knowledge, social relations are significantly affected to the mediators common identity-and bond attachments, however, interestingly, network externality does not impact, which we assumed that a size of network was a negative because group members would not significantly contribute if the members do not intend to actively interact with each other. The mediating variables had a positive effect on toward willingness to help. Further, common identity attachment has stronger significant on shared information.

• 마케팅과학연구
• /
• 제18권1호
• /
• pp.1-31
• /
• 2008

신뢰는 인간관계에서 동서고금을 통해 언제나 주목을 받아온 주제였으며, 신뢰의 중요성은 경영학 분야는 물론 인간생활의 모든 분야에서 이미 오랜 전부터 인식되어 왔다. 그러나 대부분의 연구는 주로 개인 간의 신뢰인 종업원에 대한 신뢰에만 집중하는 단일 차원적 관점에서 연구되어 왔다. 본 연구는 이와 같이 지금까지 주로 단일차원으로 연구되어 온 신뢰 대상을 판매원, 제품/서비스, 그리고 기업의 3차원으로 다차원화하여 이들 신뢰 대상이 재구매 의도에 미치는 영향을 검증하였다. 서울, 대구 경북지역의 거주자로 백화점에서 구매 경험이 있는 남녀 고객을 대상으로 수집된 자료를 분석한 결과, 기존 연구들에서 주로 다루어진 판매원신뢰뿐만 아니라 기업신뢰와 제품/서비스신뢰 또한 고객신뢰의 중요한 대상으로 나타나, 신뢰 대상은 다차원적인 구성개념임이 밝혀졌다. 이들 3차원의 신뢰는 모두 재구매 의도에 유의한 영향을 미치는 것으로 나타났으며, 특히 기업신뢰가 판매원신뢰와 제품/서비스신뢰보다 재구매 의도에 더 영향을 미치는 것으로 나타났다. 판매원신뢰와 제품/서비스신뢰의 영향요인으로 역량과 선의를, 기업신뢰의 영향요인으로 기업 평판과 물리적 환경을 설정하여 검증한 결과 역량과 선의는 판매원신뢰와 제품/서비스신뢰 모두에 유의한 영향을 미치는 것으로 나타났다. 기업신뢰의 경우, 평판은 유의한 영향을 미치는 것으로 나타났으나, 물리적환경은 유의한 영향을 미치지 않은 것으로 나타났다.

• 한국해양학회지:바다
• /
• 제10권3호
• /
• pp.154-163
• /
• 2005

1988년에 완공하여 1994년 8월부터 수문을 작동한 금강 하구언으로 인해 금강 하구역 환경은 크게 변하였다. 수문을 통해 담수를 불규칙하게 방류하면, 극심한 염분 저하와 함께 수중 무기영양염 농도가 급변한다. 이와 같이 환경 스트레스가 큰 금강 하구 내측에서 춘계 식물플랑크톤 군집의 단주기 변동을 연구하기 위하여, 2004년 2월 중순부터 4개월 동안 2개의 고정점에서 약 2일 간격으로 고조 때에 현장조사와 시료채취를 실시하였다. 하구언에 근접한 정점에서는 정점2(도선장 부근 정점)에 비해 염분 측정치의 변동계수가 2배에 이르러, 정점1에서 시간에 따른 염분의 변동이 극심함을 반증하였다. 용존 무기영양염 가운데, 질소계 영양염($NO_3^-,\;NO_2^-$ 및 $NH_4^+$)의 농도가 정점2에 비해 정점1에서 뚜렷이 높게 나타나, 수문 작동에 따라 그 농도가 부정기적으로 급변할 수 있는 환경임을 확인하였다. 식물플랑크톤 군집을 구성하는 주요 분류군은 규조류로서 출현종의 수나 생물량 모두 최고치를 기록하였다. 이 가운데 단독성 중심 규조 Cyolotella meneghiniana와 사슬형 중심 규조 Skeletonema costatum은 조사기간 전반부에 차례대로 5-6주 동안씩(천이 구간 I 및 II)절대 우점하여, 수온 $10^{\circ}C$의 시점을 중심으로 뚜렷한 천이현상을 보여 주었다. 천이구간 III(4월 중순-5월 말)은 대량 방류된 담수와 함께 하구역에 유입된 담수 녹조종인 남세균 Aphanizomenon flos-aquae와 Phormidium sp. 등이 매우 높은 구성비를 나타낸 시기이다. 이 기간에는 극저염-고염의 극심한 변동으로 인하여 낮은 수준의 생물량을 기록한 규조 Cyclotella meneghiniana와 Skeletonema costatum 외에는 담수종들이 전적으로 우점하였다. 천이구간 IV에서는 수온이 $18^{\circ}C$ 이상으로 상승하면서, 규조 Guinardia delicatuia가 단일 시료 내 최고 우점도 $75^{\circ}C$를 기록하며 약 일주일간 우점하였다. 즉, 조사기간 중에는 수온 $18^{\circ}C$ 미만의 극심한 염분 변동기(천이구간 III)를 제외한, 전 기간 중에 규조가 절대 우점하며 춘계 식물플랑크톤 우점종의 천이를 주도하였다. 천이구간 III에서도, 만약 담수방류의 규모와 빈도를 적절히 조절하였더라면, 주요 우점종이 담수 남세균이 아닌 하구성 규조로 바뀔 수도 있었을 것이다. 본 연구에 적용한 격일간 현장조사는 불규칙한 담수방류가 불가피한 반일주조 하의 하구역 환경에서 식물플랑크톤 종의 천이현상을 규명하기 위한 최소한의 필요조건으로 판단된다.

• 마케팅과학연구
• /
• 제17권4호
• /
• pp.247-269
• /
• 2007

현대에 있어 동질적인 품질과 편익을 제공하는 제품을 가지고 다수의 기업들이 시장점유율 증대와 고객확보를 위하여 치열한 경쟁을 벌이고 있는 가운데 가격할인은 기업이 즐겨 사용하는 촉진수단이다. 가격할인은 단기적 매출향상, 소비자의 브랜드전환, 신제품의 시장침투 등의 목적을 달성하기 위하여 사용된다. 실제로 과거의 실증연구에 의하면 다양한 형태의 가격할인이 판매증대에 효과적이며 가격할인은 소비자의 지각가치를 증가시킨다고 하였다. 하지만 할인된 가격은 제품의 품질을 의심하게 하거나 낮게 평가하는 부정적인 효과가 있다는 사실이 밝혀졌으며, 모든 제품카테고리와 모든 구매상황에 대하여 가격할인이 소비자의 지각가치를 향상시킨다고 볼 수 없다. 이에 따라 본 연구에서는 브랜드애호도의 차이가 있는 제품을 대상으로 가격할인율에 따라 소비자의 지각가치에 어떠한 영향을 미치는지를 연구함으로서 브랜드애호도의 조절효과를 분석하였다. 브랜드애호도가 강한 제품에 대한 지각획득가치와 지각거래가치는 가격할인율이 낮을 때 보다 큰 경우에 증가할 것으로 예측하였으나 분석결과 유의적인 차이가 없는 것으로 나타났는데, 이것은 브랜드애호도가 강한 경우에는 가격할인에 의한 지각희생의 감소량이 크지 않았고 브랜드 자체에 대한 신뢰도와 속성에 대한 만족도가 높기 때문에 가격인하가 브랜드선택에 큰 영향을 미치지 않았다는 것을 의미한다고 할 수 있다. 반면 브랜드애호도가 약한 제품에 대한 지각획득가치와 지각거래가치는 가격할인율이 낮을 때 보다 큰 경우에 감소한 것으로 나타났다. 이는 브랜드애호도가 약한 경우에는 제품으로부터 획득하게 되는 편익에 대한 만족도와 신뢰도가 낮은데 이러한 특성을 고려해보면 가격할인이 클 때에 제품의 품질과 편익을 더욱 평가절하하거나 심리적으로 지각희생의 크기가 증가됨에 따라 지각가치가 감소되었음을 의미한다고 할 수 있다.

• 헤리티지:역사와 과학
• /
• 제37권
• /
• pp.285-307
• /
• 2004

이 연구에서는 전남 화순군에 위치한 운주사의 석조문화재를 중심으로 암석의 풍화대 형성과 풍화의 진행에 따른 암석학적 특성과 지화학적 특성을 종합 검토하였다. 이 결과를 중심으로 석조물을 이루는 암석의 기계적, 화학적, 광물학적 및 물리적 풍화에 영향을 미치는 풍화요소를 규명하였고, 이들을 정량화하여 석조문화재의 보존방안 강구를 위한 기초자료로 활용하고자 한다. 이 연구를 위하여 야외 정밀조사 및 총 18개의 시료(화산력 응회암 7점, 화산회 응회암 4점, 화강암류 4점, 화강편마암 3점)에 대한 전암분석과 암석의 특성 및 광물감정을 실시하였다. 또한 각각의 석조물에 대한 훼손현황을 반정량적으로 기재하였다. 운주사 일대의 지질을 이루는 암석은 화산력 응회암이며 대체로 N30-40W의 주향과 10~20NE의 경사를 갖고 있다. 이 화산력 응회암은 운주사를 중심으로 매우 넓게 분포하고 있으며 운주사 경내에 분포하는 석조물은 모두 화산력 응회암으로 조형되어 있다. 현재 운주 사 경내의 석조물들은 대부분 심한 균열의 발달과 함께 구조적 불균형을 이루고 있으며, 생물학적 오염 및 암석의 풍화가 상당히 진행되어 각력이 탈락하고 광물의 입상분해가 발생하는 등 풍화와 훼손양상이 아주 심각하다. 또한 석조물 곳곳의 철편과 시멘트 몰탈은 산화되어 적갈색의 침전물과 회백색의 침전물을 형성하고 있다. 이들 석조물에 대해 육안 훼손정도를 기재한 결과 대부분의 석조물들이 MD(moderate damage)에서 SD(severe damage) 등급의 훼손정도를 보이고 있다. 각 암석의 X선 회절분석 결과, 대부분의 시료들은 석영, 정장석, 사장석, 방해석 및 자철석 등의 광물로 구성되어 있다. 현미경하에서는 석영과 장석류가 심하게 변질되었으며, 타형의 결정형을 보이는 흑운모는 풍화되어 이차 풍화광물인 녹니석으로 변질되어 있다. 또한 응회암 곳곳의 열극대에 적갈색의 철분 침전물이 관찰되는 것으로 보아 암석의 내부까지 풍화가 진행되고 있음을 알 수 있다. 연구지역의 석조물을 이루는 응회암류는 Subalkaline, Peraluminous의 영역에 도시되며, 시료의 $SiO_2$(wt.%) 범위는 화산력 응회암이 70.08~73.69, 화산회 응회암은 70.26~78.42 의 범위를 보이고 있다. 또한 주성분원소에 대한 화학적풍화지수(CIA)와 풍화잠재지수(WPI) 계산치에서 CIA의 범위는 화산력 응회암은 55.05~60.75, 화산회 응회암은 52.10~58.70, 화강암은 49.49~51.06 화강편마암은 53.25~67.14의 범위를 보이며 이들은 편마암류와 응회암류에서 큰 값을 갖는다. WPI는 응회암류와 편마암류의 시료에서 0선 이하에 있거나 0선에 근접되어 도시되는 것으로 보아 상위 CIA에서와 같이, 이들 응회암류와 편마암류가 화학적인 풍화 작용을 쉽게 받고 있음을 시사한다. 암석의 분말시료와 석조물의 피복시료를 채취하여 전자현미경(SEM)으로 관찰한 결과 암석의 이차적인 풍화산물인 스멕타이트, 불석군의 점토광물이 관찰된다. 그리고 암석의 생물학적 풍화 요소인 하등식물의 균사류 및 지의류의 모근과 포자가 함께 관찰된다. 이는 암석의 내부까지 생물체가 압력을 가하고 있어 석조물의 기계적 풍화작용을 가중시키고 있으며, 이와 함께 석조물 내에 점토광물화가 상당히 진행된 것으로 판단된다. 암석의 풍화가 상당히 진행되어 비, 바람, 수목, 지반 등 자연환경 의해 훼손이 가속화 되고 있는 상태이다. 이에 대한 방안으로 1차 수목 제거 등 주변 환경정비와 배수로 설치 등 물 침투 방지에 대한 지반환경 조성이 필요하고, 2차 지의류 제거 등 생물학적 처리와 합성수지를 사용한 균열부분 접착복원과 암석 재질을 강하게 하는 경화 및 발수처리를 실시한다. 그리고 풍화의 원인인 바람, 햇빛, 비 등을 차단시킬 수 있고 주변경관과 어울리는 보호시설을 건립하여 보존하는 것이 좋을 것으로 판단된다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.