• 한국해양환경ㆍ에너지학회지
• /
• 제8권3호
• /
• pp.134-139
• /
• 2005

본 연구에서는 조간대에서 유출된 기름의 표착 및 침투과정을 파악하고, 침투된 기름의 해수 침투차단 여부를 검토하는 것을 목적으로 하여 모의 조간대를 이용하여 연구를 수행하였다. 표착된 기름의 침투깊이는 분산유가 가장 낮았으며, 풍화유 그리고 원유의 순서로 깊어지는 경향을 나타냈다. 그리고 기름의 침투는 표착된 기름의 양에 의해 좌우되는 것을 알 수 있었으며, 유출된 기름의 침투는 첫번째 조석에서 거의 대부분 결정되며 그이후에는 거의 변화가 없었다. 침투된 기름은 토양 표층으로부터 2 cm 부분이 가장 농도가 높음을 알았다. 기름의 침투량의 증가와 더불어 해수의 침투량이 감소하였으며, 분산유보다는 원유나 풍화유가 보다 많은 양의 해수를 차단하였다. 따라서 해수의 침투량의 차단이라는 관점에서 볼 때 연안 조간대에서 표착유의 저서생물에 대한 피해는 풍화유나 원유가 분산유보다 클것으로 사료된다.

• Korea-Australia Rheology Journal
• /
• 제21권1호
• /
• pp.71-79
• /
• 2009

The incomplete saturation and the void formation during the resin infiltration into fibrous porous media in the resin transfer molding process cause failure in the final product during its service. In order to better understand flow behavior during the filling process, a finite-element scheme for transient flow simulation across the micro-structured fibrous media is developed in the present work. A volume-of- fluid (VOF) method has been incorporated in the Eulerian frame to capture the evolution of flow front and the vertical periodic boundary condition has been combined to avoid unwanted wall effect. In the microscale simulation, we investigated the transient filling process in various fiber structures and discussed the mechanism leading to the flow fingering in the case of random fiber distribution. Effects of the filling pressure, the shear-thinning behavior of fluid and the volume fraction on the flow front have been investigated for both intra-tow and the inter-tow flows in dual-scale fiber tow models.

• Clinics in Shoulder and Elbow
• /
• 제24권3호
• /
• pp.135-140
• /
• 2021

Background: We hypothesized in this study that the characteristics of retear cases vary according to surgeon volume and that surgical outcomes differ between primary and revision arthroscopic rotator cuff repair (revisional ARCR). Methods: Surgeons performing more than 12 rotator cuff repairs (RCRs) per year were defined as high-volume surgeons, and those performing fewer than 12 RCRs were considered low-volume surgeons. Of the 47 patients who underwent revisional ARCR at our clinic enrolled in this study, 21 cases were treated by high-volume surgeons and 26 cases by low-volume surgeons. In all cases, the interval between primary surgery and revisional ARCR, degree of "acromial scuffing," number of anchors, RCR technique, retear pattern, fatty infiltration, retear size, operating time, and clinical outcome were recorded. Results: During primary surgery, significantly more lateral anchors (p=0.004) were used, and the rate of use of the double-row repair technique was significantly higher (p<0.001) in the high- versus low-volume surgeon group. Moreover, the "cut-through pattern" was observed significantly more frequently among the cases treated by high- versus low-volume surgeons (p=0.008). The clinical outcomes after revisional ARCR were not different between the two groups. Conclusions: Double-row repair during primary surgery and the cut-through pattern during revisional ARCR were more frequent in the high- versus low-volume surgeon groups. However, no differences in retear site or size, fatty infiltration grade, or outcomes were observed between the groups.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.129-130
• /
• 2023

This study proposes rainwater infiltration retention blocks as a solution to the flooding problems caused by recent climate change and developed a flood prediction simulation program to select the optimal site for installing rainwater infiltration retention blocks that can minimize damage from floods. By applying the existing 2D flood analysis model G2D and adding a reservoir function, the volume of water before and after installation can be determined through simulation results.

• 동력기계공학회지
• /
• 제9권4호
• /
• pp.130-136
• /
• 2005

The effects of additional Mg content, the size and volume fraction of reinforcement phase on the mechanical properties of ceramic particle reinforced aluminium matrix composites fabricated by pressureless metal infiltration process were investigated. The hardness of $SiC_p/AC8A$ composites increased gradually with an increase in the additive Mg content, while the bending strength of $SiC_p/AC8A$ composites increased with an increase in additive Mg content up to 5%. However, this decreased when the level of additive Mg content was greater than 5% due to the formation of coarse precipitates by excessive Mg reaction and an increase in the porosity level. The hardness and strength of the composites increased with decreasing the size of SiC particle. It was found that the composites with smaller particles enhanced the interfacial bonding than those with bigger particles from fractography of the composites. The hardness of $Al_2O_{3p}/AC8A$ composites increased gradually with an increase in the volume fraction, however, the bending strength of $Al_2O_{3p}/AC8A$ composites decreased when the volume fraction of alumina particle was greater than 40% owing to the high porosity level.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제8권1호
• /
• pp.75-80
• /
• 2003

해수 중에는 연안 조간대의 저서생물의 생존에 필수적인 용존산소와 영양염이 풍부하게 내포되어 있기 때문에 해수의 토양침투는 저서생물의 생존과 밀접한 관련을 맺고 있다. 그러나 유출된 기름이 조간대에 표착하게 되면 해수의 침투가 차단되어 생물에게 많은 피해를 유발시킬 것이다. 또한 유출된 기름의 토양 침투에 관한 정보는 생태계 영향을 최소화하고 처리를 위한 대책수립의 단서로서 매우 중요하다. 본 연구에서는 유출된 기름의 침투 거동을 파악하고 침투된 기름의 해수 침투 차단을 검토하는 것을 목적으로 하여 연구를 수행하였다. 점도가 낮은 원유가 C중유보다 침투 깊이가 약 2배 깊었으며, 유출된 기름의 침투 깊이는 조간대에 표착된 기름의 양에 따라 영향을 받는 것을 알 수 있었다. 그리고 표착된 기름은 첫번째 조석에서 가장 급격한 침투거동을 보였으나, 두번째 조석변동부터는 급격한 침투 변화는 나타나지 않았다. 그리고 침투한 유분의 수직적 분포로부터 기름은 토양 표층 2cm에 집중적으로 분포하는 것을 알 수 있었다. 한편 해수의 침투량은 표착유의 양에 비례적으로 감소하였으며, C중유가 원유보다 약 1.7배 정도의 해수의 토양 침투량을 감소시키는 것을 알 수 있었다. 따라서, 침투한 기름의 처리는 가능한 빠른 시간내에 수행되어야 해수의 침투를 회복시켜 연안 조간대 생태계의 피해를 최소화 시킬 수 있다고 판단된다.

• 대한본초학회지
• /
• 제27권3호
• /
• pp.83-88
• /
• 2012

Objects : This study was performed in order to observe the effects of water extract of Dendrobii herba on intracerebral hemorrhage(ICH), Method : ICH was induced by the stereotaxic intrastriatal injection of bacterial collagenase type IV in Sprague-Dawley rats. After the water extracts of Dendrobii herba were administrated orally once a day for 3 days, hematoma volume, percentage of brain edema, expression of iNOS and MPO were observed using immunohistochemistry. Results : Rats fed with water extracts of Dendrobii herba showed reduction of hematoma volume and percentage of brain edema compared with controls. In addition, Infiltration of myeloperoxidase (MPO) expressing neutrophil and expression of inducible nitric oxide synthatase(iNOS) were significantly reduced in rats fed with water extracts of Dendrobii herba. Conclusion : These results demonstrated that water extracts of Dendrobii herba reduced brain damage of intracerebral hemorrhage(ICH) and subsequent ICH-induced cerebral edema, and inhibited neutrophil infiltration.

• 한국주조공학회지
• /
• 제21권3호
• /
• pp.163-178
• /
• 2001

The squeeze infiltration process is potentially of considerable industrial importance. The performance enhancements resulting from incorporation of short alumina fiber into aluminum are well documented. These are particularly significant for certain automobile components. Aluminum matrix composite automotive parts, such as diesel engine pistons or engine blocks are produced using squeeze casting apparatus or pressure die-casting apparatus. But the solidification process gets complicated with manufacturing parameters and the factors for porosity formation have not fully understood yet. In this study the formation of porosity during squeeze infiltration has been studied experimentally to achieve an improved understanding of the squeeze infiltration process for manufacture of short-fiber-reinforced components, particularly the mechanism of porosity formation. Al-based MMCs produced under a range of conditions were examined metallographically and the porosity characterised;a kind of matrix, an initial temperature of melt, and a volume fraction of reinforcement. The densimetry and the microscopic image analysis were done to measure the amount of porosity. A correlation between manufacturing parameters and defects was investigated through these.

• 한국농공학회논문집
• /
• 제51권6호
• /
• pp.105-114
• /
• 2009

With urbanization in many countries, many pervious areas are being converted into impervious areas. These land use changes cause many negative impacts on runoff and water quality in the areas. Especially runoff volume and peak runoff are increasing with urbanization. In addition to the increased runoff, more pollutant transports to the downstream areas. For these reasons, Low Impact Development (LID) are nowadays being introduced in urban planning. For environment-friendly and economical urban development, the LID Integrated Management Practices (IMPs) are applied in various urban development. However, exact effects on runoff and water quality of various LID IMPs are not assessed with proper LID evaluation technique. Thus, the SWMM (Storm Water Management Model) 5.0 model was slightly modified to simulate the effect of infiltration manhole on runoff and water quality. For comparison of runoff and TSS (Total Suspended Solids) from the study area (26.5 ha), three scenarios were made in this study. It was found that runoff volume, peak runoff, and TSS could be reduced with infiltration manholes and pervious pavements to some degree. Although, there are many limitations in the analysis of LID effects on runoff and TSS, similar trends shown in this study would be expected with site-specific LID IMPs. Thus, it is strongly recommended that various site-specific LID IMPs, such as infiltration facilities, should be applied as much as possible for environment-friendly urban planning.

• 한국해양공학회지
• /
• 제17권1호
• /
• pp.55-60
• /
• 2003

The effect of size and volume fraction of ceramic particles, with sliding velocity on the wear properties were investigated for the metal matrix composites fabricated by the pressureless infiltration process. The metal matrix composites exhibited about 5.5 - 6 times the wear resistance compared with AC8A alloy at high sliding velocity, and by increasing the particle size and decreasing the volume fraction, the wear resistance was improved. The wear resistance of metal matrix composites and AC8A alloy exhibited different aspects. Wear loss of AC8A alloy increased with sliding velocity, linearly : whereas, metal matrix composites indicated more wear loss than AC8A alloy at the slow velocity region. However, a transition point of wear loss was found at the middle velocity region, which shows the minimum wear loss. Further, wear loss at the high velocity region exhibited nearly the same value as the slow velocity region. In terms of wear mechanism, the metal matrix composites generally exhibited abrasive wear at slow to high sliding velocity； however, AC8A alloy showed abrasive wear at low sliding velocity and adhesive and melt wear at high sliding velocity.