• Progress in Superconductivity
• /
• v.12 no.1
• /
• pp.6-11
• /
• 2010

The milling effects of a precursor $Y_2BaCuO_5$ (Y211) powder having 1 wt.% $CeO_2$ on the microstructure and critical current density ($J_c$) of liquid infiltration growth (LIG) processed $YBa_2Cu_3O_{7-y}$ (Y-123) bulk superconductors were investigated. The microstructure analysis revealed that the Y211 size in the final Y-123 products decreased with increasing the milling time and a relatively high density and uniform distribution of Y211 inclusions were observed in the sample prepared using 8 h milled powder. However, the unexpected Y211 particles coarsening was observed from the 4 h milled sample which was further increased for 10 h milled sample. Critical current density ($J_c$) of the LIG processed Y-123 bulk superconductors was found to be dependent on the milling time of the Y211 precursor powder. The $J_c$ increased with the increase of milling time and reached up to a maximum at 8 h in the self field while 10 h milled sample showed lower $J_c$ at the same field which might be due to the exaggerated growth and non-uniform distribution of Y211 particles.

• Composites Research
• /
• v.30 no.2
• /
• pp.108-115
• /
• 2017

Among several fabrication processes of $SiC_f/SiC$ composites, the chemical vapor infiltration (CVI) process has attractive advantages in manufacturing complex net-or near-net-shape components at relatively low temperatures, easily controlling the microstructure of the matrix and obtaining the highest SiC purity level. However, it has disadvantages in that the ratio of residual pores in matrix is higher than other processes and processing time is relatively long. To reduce the residual porosity, the whisker-growing-assisted CVI process, which is composed of whisker growth and matrix filling steps has been developed. The whiskers grown before matrix filling may serve to divide the large natural pores between the fibers or bundles so that the matrix can be effectively filled into the finely divided pores. In this paper, the fundamentals of the CVI process for preparation of $SiC_f/SiC$ composites and some experimental results prepared by CVI and whisker-growing-assisted CVI processes are briefly introduced.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.21 no.1
• /
• pp.1-12
• /
• 1999

The purpose of this study was to evaluate the healing process of the calvarial defect filled with hydroxylapatite(HA) and $TGF-{\beta}$ in Rat. 72 Sprague-Dawly rats were divided into 3 groups, control and two experimental groups. Bony defect were artificially prepared in the calvaria of all 72 rats and followed by implantation of HA (experimental group of 24 rats) and HA+$TGF-{\beta}$(another experimental group of 24 rats) into the defects. Sequential sacrifice was performed at 1, 2, 4, 6, 8, 12 weeks of experiment. Obtained specimen was stained with Hematoxylin and Eosin, Masson's Trichrome and Immunohistochemistry. The results were as follows, 1. Granulation tissue was prominent on control group in 1 and 2 weeks. Bony defects were filled with dense fibrous tissue through the whole experimental period and osteoinduction could not be observed in all groups. 2. Inflammatory cell infiltration was prominent on control group in 1 and 2 weeks and osteoclastic activity was high in HA implanted experimental group at 1 and 2 weeks. 3. Inflammatory cell infiltration was less and maturation of fibrous tissue could be found on HA+$TGF-{\beta}$ implanted experimental group at 1 and 2 weeks. 4. Osteoconduction activity was high in HA+$TGF-{\beta}$ implanted experimental group at 2 and 4 weeks but there was no difference after 6 weeks among 3 groups. 5. In grafted site of HA+$TGF-{\beta}$ implanted group, osteonectin expression was slightly increased from 1 week to 6 weeks. In the host site, it was increased from 1 to 4weeks. 6. In grafted site of HA+$TGF-{\beta}$ implanted group, osteocalcin expression was high at 4 weeks. In the host site, we could find the difference among 3 groups. From above results, the HA with mixture of $TGF-{\beta}$ has the potentiality of promoting bone formation in the bony defect area in the rat.

• Proceedings of the SCSK Conference
• /
• 2003.09a
• /
• pp.540-567
• /
• 2003

Metabolic disease such as diabetes, which is caused by stress or imbalanced diet, has been increasing. A diabetic tend to suffer from a delay or difficulty of wound healing. The extract of SHIKON (SK), that is the root of Lithospermun erythrorhison, has been reported to have an effect on healing for normal wound, but has never studies for intractable wound so far. Therefore we examined the effect of SK extract on wound healing with healing impaired mouse model. Full-thickness round wounds were created on the backs of db/db mice and applied SK, and we observed neovascularization and collagen synthesis, distribution of apoptotic cells, and vascular endothelial growth factor (VEGF)- positive cells in granulation tissue. After two weeks, a number of capillary vessel and collagen synthesis were increased in SK-treated wounds. Infiltration of VEGF-positive neutrophils was also seen in the wound, besides apoptotic fibroblasts and endothelial cells were appeared in the granulation tissue. After three weeks, the wound closed completely with SK-treated but not in control. These results suggest that SK enhanced neovascularization by VEGF and this kind of apoptosis process makes the scar smooth. In this study, it is obvious that SK also accelerates healing of intractable wound.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.150-150
• /
• 2016

Mankind is enjoying a great convenience of their life by the rapid growth of secondary industry since the Industrial Revolution and it is possible due to the invention of huge power such as engine. The automobile which plays the important role of industrial development and human movement is powered by the Engine Module, and especially Diesel engine is widely used because of mechanical durability and energy efficiency. The main work mechanism of the Diesel engine is composed of inhalation of the organic material (coal, oil, etc.), combustion, explosion and exhaust Cycle process then the carbon compound emissions during the last exhaust process are essential which is known as the major causes of air pollution issues in recent years. In particular, COx, called carbon oxide compound which is composed of a very small size of the particles from several ten to hundred nano meter and they exist as a suspension in the atmosphere. These Diesel particles can be accumulated at the respiratory organs and cause many serious diseases. In order to compensate for the weak point of such a Diesel Engine, the DPF(Diesel Particulate Filter) post-cleaning equipment has been used and it mainly consists of ceramic materials(SiC, Cordierite etc) because of the necessity for the engine system durability on the exposure of high temperature, high pressure and chemical harsh environmental. Ceramic Material filter, but it remains a lot of problems yet, such as limitations of collecting very small particles below micro size, high cost due to difficulties of manufacturing process and low fuel consumption efficiency due to back pressure increase by the small pore structure. This study is to test the possibility of new structure by direct infiltration of SiC Whisker on Carbon felt as the next generation filter and this new filter is expected to improve the above various problems of the Ceramic DPF currently in use and reduction of the cost simultaneously. In this experiment, non-catalytic VS CVD (Vapor-Solid Chemical Vaporized Deposition) system was adopted to keep high mechanical properties of SiC and MTS (Methyl-Trichloro-Silane) gas used as source and H2 gas used as dilute gas. From this, the suitable whisker growth for high performance filter was observed depending on each deposition conditions change (input gas ratio, temperature, mass flow rate etc.).

• Journal of the Korean Ceramic Society
• /
• v.36 no.1
• /
• pp.21-29
• /
• 1999

The effects of density and pore size distribution of substrate in preparing SiC conversiton layer on graphite substrate were investigated. The chemical reaction for formation of SiC conversion layer was occurred at substrate surface or below surface through SiC gas infiltration. It was supposed that the pore size distribution required for the sufficient SiO gas infiltration and the continuous chemical reaction during conversion process was in the range of 1.0∼10.0$\mu\textrm{m}$. In the stress analysis of SiC layer with finite element method (FEM), the residual stress distribution due to thermal mismatch was shown. However, the compressive stress was measured in SiC layer by X-ray diffraction, it was presumed that the residual stress distribution of SiC layer was mainly influenced by the constraining effect of interlayer between SiC layer and graphite substrate, and the densification behaviro and the grain growth in SiC conversion layer.

• Korean Journal of Materials Research
• /
• v.21 no.2
• /
• pp.125-132
• /
• 2011

Fibrous chitosan membranes were fabricated as a substrate for skin applications using an electro-spinning process with different solvents and varying concentrations. Scanning electron microscopy (SEM) images confirmed that the formation of the chitosan fibrous membrane in trifluoroacetic acid was better than that in acetic acid. Fourier transform infrared spectroscopy showed that the chitosan fibers were cross-linked with glutaraldehyde, and that the cytotoxicity of the aldehyde groups was reduced by glycine and washing by NaOH and DI water. Chitosan cross-linked fibrous membranes were insoluble in water and could be washed thoroughly to wash away glycine and excess NaOH and prevent the infiltration of other water soluble bio-toxic agents using DI water. MTT assay method was employed to test the cytotoxicity of chitosan membranes during fabricating, treating and washing processes. After the dehydration of cell cultured chitosan membranes, cell attachment behavior on the material was evaluated using SEM method. Effect of the treatment processes on the biocompatibility of the chitosan membranes was shown by comparing of filopodium and lamellipodium of fibroblast cells on grown washed and unwashed chitosan fibrous membrane. The MTT assay and SEM morphology confirmed that the washed chitosan fibrous membrane increased cell attachment and cell growth, and decreased toxicity compared to results for the unwashed chitosan fibrous membrane.

• Journal of agriculture & life science
• /
• v.44 no.1
• /
• pp.9-15
• /
• 2010

Barley, a monocotyledonous plant, is relatively recalcitrant to the process of Agrobacterium-mediated genetic transformation. In this study, seedlings of six barley cultivars (Keunal-1-Ho, Saessal, Ol, Saechalssal, Seodunchal and Pungsanchalssal) were injured using alkali, oxidizing or reducing agents. They were then transformed using Agrobacterium via vacuum infiltration for the analysis of comparative GUS gene expression. It was determined that chemical injuries causing a slight growth retardation could overall enhance the GUS transformation rate. Hydrogen peroxide was determined to be the most effective.

• Korean Journal of Soil Science and Fertilizer
• /
• v.20 no.3
• /
• pp.231-240
• /
• 1987

With a purpose to obtain basic informaton for improving poorly drained soil, a pot experiment was conducted about the effect of percolation rate on growth and yield of rice under application of wollastonite and rice straw as soil conditioner. The sandy and clayey soils were selected to compare difference in effectiveness of poor drainage. The results were summarized as follows: 1. Increasing or percolation rate increased rice yield in both sandy and clayey soils, but the effectiveness on yield increase was greater in clayey soil than in sandy. 2. Various materials of soil solution produced from the process of soil reduction were high at the early growing stage, but they were gradually decreased at the later growing stage. 3. With increasing percolation rate, the contents of N, $P_2O_5$ and $K_2O$ in rice plant were decreased, but that of $SiO_2$ was increased. 4. The number of roots at harvest was greater with increased extension as infiltration rate was increased.

• Economic and Environmental Geology
• /
• v.18 no.2
• /
• pp.139-150
• /
• 1985

Skarn at the Dielette formed largely in calc-silicate hornfels at the contact with the Flamanville granite. The skarn consists mainly of garnet and pyroxene, and less frequently vesuvianite. Traversing toward calc-silicate hornfels wall rock from a central zone of the skarn, the general sequence of formation of mineral assemblages is: (1) dark brown garnet (2) pale brown garnet-vesuvianite-pyroxene, and (3) pyroxene-prehnite-scapolite-wollastonite envelopes (designated as transition zone) developed between skarn and calc-silicate hornfels. The central zone of the skarn consists mainly of dark brown garnets (garnet I) that contain little or no pyroxene. The pale brown garnet (garnet II) is associated with pyroxene and vesuvianite. The sequence of these garnets results from the zonal growth outward. There is an abrupt discontinuity in composition between garnet I formed in early stage and garnet II in late stage, while each garnet shows relatively uniform composition. At the zone in contact with the granite, the iron contents of garnets decrease toward the marginal zone of the skarn, from an average value of 36 mole % andradite in garnet I to 18 mole % andradite in garnet II. At the zone distant from the granite, the andradite component decreases from 28 mole % in garnet 1 to 19 mole % in garnet II. The variation of the iron contents of pyroxenes is also similar to that of garnets. The sharp discontinuity in composition of garnets and pyroxenes suggests that the skarn of study area was formed by infiltration metasomatic process. The results of the analyses of mineral assemblages of the transition zone by chemical potential diagrams suggest that the transition zone was made by the diffusion of the elements Ca, K and Fe from the skarn to the calc-silicate hornfels contact zone. The estimated temperatures and $Xco_2$ for the formation of the transition zone show $300^{\circ}C$$440^{\circ}C$ and $0.07{\pm}0.05<Xco_2<0.02{\pm}0.01$ at 1 Kb respectively.