• Computers and Concrete
• /
• 제26권1호
• /
• pp.95-106
• /
• 2020

Castellated beams fabricated from standard I-sections are being used for several structural applications such as commercial and industrial buildings, multistory buildings, warehouses and portal frames in view of numerous advantages. The advantages include enhanced moment of inertia, stiffness, flexural resistance, reduction in weight of structure, by passing the used plate girders, the passage of service through the web openings etc. In the present study, experimental and numerical investigations were carried out on concrete encased steel castellated beams with hexagonal openings under flexural loading. Various positions of openings such as along the neutral axis, above the neutral axis and below the neutral axis were considered for the study. From the experimental findings, it has been observed that the load-carrying capacity of the castellated beam with web opening above neutral axis is found to be higher compared to other configurations. Nonlinear finite element analysis was performed by using general purpose finite element software ABAQUS considering the material nonlinearities. Concrete damage plasticity model was employed to model the nonlinearity of concrete and elasto-plastic model for steel. It has been observed that FE model could able to capture the behaviour of concrete encased steel castellated beams and the predicted values are in good agreement with the corresponding experimental values.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.191-193
• /
• 2005

This paper presents Hybrid PI controller of IPMSM drive using fuzzy adaptive mechanism(FAM) control. To increase the robustness, fixed gam PI controller, Hybrid PI controller proposes a new method based self tuning PI controller. Hybrid PI controller is developed to minimize overshoot and settling time following sudden parameter changes such as speed, load torque, inertia, rotor resistance and self inductance. The results on a speed controller of IPMSM are presented to show the effectiveness of the proposed gain tuner. And this controller is better than the fixed gains one in terms of robustness, even under great variations of operating conditions and load disturbance.

• 한국자동차공학회논문집
• /
• 제24권1호
• /
• pp.16-23
• /
• 2016

The EWB(electronic wedge brake) is one in which the braking force is developed in a wedge and caliper system and applied to a disk and wedge mechanism. The advantage of the wedge structure is that it produces self-reinforcing effect and hence, utilizes minimal motor power, resulting in reduced gear and current. The extent of use of clamping force sensors and protection from failure of the EWB system directly depends on the level of vehicle mass production. This study investigated the mathematical equations, simulation modeling, and failsafe control algorithm for the clamping force sensor of the EWB and validated the simulations. As this EWB system modeling can be applied to motor inductance, resistance, screw inertia, stiffness, and wedge mass and angle, this study could improve the accuracy of simulation of the EWB. The simulation results demonstrated the braking force, motor speed, and current of the EWB system when the driver desired to the step and pulse the brake force inputs. Moreover, this paper demonstrated that the proposed failsafe control algorithm accurately detects faults in the clamping force sensor, if any.

• Tribology and Lubricants
• /
• 제27권6호
• /
• pp.314-320
• /
• 2011

Although swash-plate type axial piston pumps have the merits of wide operating conditions and high efficiency, the characteristics of pressure pulsation and flow ripple which result in system noise generation are on-going problems. This research examined the analytic models of the dynamic oil pressure and flow characteristics in the pump. A new mathematical model which considered the pressure behaviors of each cylinder and discharge piping was developed to analyze the pump pressure and flow. This model also considered the leakages in the clearances which many researchers have ignored so far. Using the developed model, numerical calculations were implemented. The results showed that widely used simple model which considered only a single cylinder can not predict actual discrete flow dynamics and that fluid inertia effect has to be considered in the mathematical model. Several critical parameters were discussed such as port volume and discharge resistance on the assumption that the pipe length is not so long. The effect of leakages was studied on the final stage.

• 한국정밀공학회지
• /
• 제21권11호
• /
• pp.209-218
• /
• 2004

The purpose of this paper is to suggest a practical and simple method for the identification of the joint mechanical properties and to apply it to human knee joints. The passive moment at a joint was modeled by three mechanical parts, that is, a gravity term, a linear damper term and a nonlinear spring term. Passive pendulum tests were performed in 5 fat and 5 thin men. The data of pendulum test were used to identify the mechanical properties of joints through sequential quadratic programming (SQP) with random initial values. The identification was successful where the normalized root-mean-squared (RMS) errors between the simulated and experimental joint angle trajectories were less than 10％. The parameter values of mechanical properties obtained in this study agreed with literature. The inertia, gravity and the damping constant were greater at fat men, which indicates more resistance to body movement and more energy consumption fer fat men. The suggested method is noninvasive and requires simple setup and short measurement time. It is expected to be useful in the evaluation of joint pathologies.

• 대한건축학회논문집:구조계
• /
• 제34권7호
• /
• pp.3-10
• /
• 2018

Steel fiber reinforced concrete can improve the resistance to cracking by adding steel fibers when mixing concrete. It can reduce the temperature and shrinkage cracks, and its flexural performance can be improved by increasing the effective moment of inertia. In this study, the deck-plate was used to replace the concrete form and reinforcing bars, and the steel fiber reinforced concrete was used to control the shrinkage and temperature cracks, and improve the flexural performance of the slab. Total 9 slab specimens were tested for analyzing the structural performance and serviceability. As a results, flexural capacity of the slab with deck-plate was evaluated to be superior to that of the normal reinforced concrete slab specimens with the same tensile reinforcement. The steel fiber reinforced concrete was found to have about 8% flexural capacity increase depending on the steel fiber content $15.7kg/m^3$. Also, in terms of flexural stiffness, the specimens using steel fiber reinforced concrete for the same parameters were evaluated to have a stiffness increase of about 30% compared with the case of using ordinary concrete. Especially, it was found that the stiffness of the test results was significantly higher than the analytical result because the increase of the tensile strength of the steel fiber reinforced concrete is not reflected in the current structural code.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.133-133
• /
• 2017

Lodging is one of the important constraints in rice production. The lodging destroys the canopy structure, and sharply reduces the capacity of photosynthetic rate and dry matter production. In cereal crops, stem lodging can be classified into two types: stem breaking type and stem bending type. To improve stem lodging resistance, it is important to reveal strong culm traits of superior lodging resistant varieties. There are large varietal differences in parameters associated with the bending moment at breaking (M) and flexural rigidity (FR). The indica variety Takanari possesses large M due to its large section modulus (SM) despite of its small bending stress (BS), while Takanari also has large FR due to its large secondary moment of inertia (SMI) and Young's modulus (YM). To identify quantitative trait loci (QTLs) and the corresponding genes associated with the parameters for M ($=SM{\times}BS$) and FR ($=SM{\times}YM$) should enable to develop lodging resistant varieties, efficiently. In order to identify QTLs for cell wall materials such as cellulose, hemicellulose and lignin associated with BS and YM, a set of Chromosome Segment of Substitution Lines (CSSLs) consisted of 37 lines with chromosome segments of Koshihikari in the genetic background of Takanari were used. Takanari had large M and small BS as compared with Koshihikari. The QTLs for BS were estimated on chromosomes 3, 5, 6, 8, 9, 10, 11 and 12. Koshihikari alleles increased BS in these QTLs. Takanari had a large FR due to its large SMI and YM as compared with Koshihikari. The YM was increased by substitution of the Koshihikari chromosomal segments on chromosomes 2, 10 and 11. Other QTLs estimated on chromosomes 7 and 12 that Koshihikari alleles contributed to the decrease of YM. For lignin, only one major QTL for lignin density was detected on chromosome 11. Hollocellulose densities were increased by the substitution of Koshihikari segments on chromosomes 5 and 11. On the other hand, these were decreased on chromosomes 1 and 3 by substitution of Koshihikari segments. QTLs for cellulose density were estimated on chromosomes 1, 3 and 5 by substitution of Koshihikari segments. For hemicellulose, QTL on chromosome 3 showed that hemicellulose density decreased by the substitution of Koshihikari segment. However, hemicellulose densities on chromosomes 5, 8 and 11 showed the opposite effects. The QTLs for hemicellulose, cellulose, and hollocelulose densities identified on chromosome 5 overlapped with that for bending stress, indicating the positive effect of Koshihikari segment on increasing bending stress. These results suggest that some QTLs for the densities of cell wall materials contribute to increasing bending stress and Young's modulus, and could be utilized to improve the lodging resistance for both types of breaking and bending in rice varieties.

• 한국강구조학회 논문집
• /
• 제22권2호
• /
• pp.139-150
• /
• 2010

기둥은 하중 상태에 따라서 축하중과 횡하중 등에 영향을 받는 주부재로서 많이 사용되어지고 있다. 일반적으로 철근 콘크리트(Reinforced Concrete Column, R.C. Column)이 가장 많이 설계 및 시공되고 있으며, 그 밖에도 콘크리트 충전 강관(.Concrete Filled Tube, CFT) 기둥과 같은 복합재료의 기둥이 최근 현장에 많이 적용되어 건설이 진행되고 있는 실정이다. 철근 콘크리트 기둥의 자중의 감소와 사용 재료의 절감을 위하여, 기존의 기둥에 중공부를 두는 중공 R.C 기둥이 사용되고 있다. 중공 RC의 경우 동일 단면적을 갖는 일반 R.C기둥에 비하여 큰 단면이차모멘트를 갖게 되므로 더 효율적인 단면 활용이 가능하다. 그러나 위와 같은 장점이 있는 것과는 반대로, 중공 R.C 기둥은 내측면의 취성파괴로 인하여 낮은 연성 거동을 할 가능성이 높다. 이러한 내측면의 취성 파괴는 기둥 외측면의 경우 횡철근에 의해 구속되어 있으나, 내측면의 콘크리트에는 구속력이 작용하지 않는다. 이러한 단점을 극복하기 위하여 중공면에 구속력을 작용시켜, 콘크리트를 3축 구속 상태로 만들어 주어야 한다. 이를 해결하기 위해서 중공 R.C. 기둥 중공부에 강관을 삽입함으로서 중공 기둥 내의 콘크리트를 3축 구속 상태로 만들어주는 내부 구속 중공 R.C 기둥(Internally Concfined Hollow Reinforced Concrete, ICH R.C)이 기존연구자에 의해서 제시되어졌다.(Kang & Han, 2005) 본 연구에서는 ICH RC 기둥의 열전달 해석 및 비선형 재료모델 프로그램을 이용하여 내화 성능을 분석하였으며, 중공비, 피복콘크리트의 두께, 내부강관의 두께를 변수로 선정하여 매개변수를 수행함으로서 내부 구속 중공 RC 기둥의 내화 성능을 증가 시켜주는 인자를 찾아내고 분석하였다.

• 한국작물학회지
• /
• 제14권
• /
• pp.117-121
• /
• 1973

대맥의 생육시기별로 질소비료를 추비하여 맥체의 형태적, 물리적 특성에 미치는 영향을 검토코져 시험을 실시한 결과를 요약하면 다음과 같다. 1. 질소 추비에 따른 대맥의 형태적 특성변화의 추이를 보면, 도복과 관련이 깊은 형질, 중, 3월 추비구가 제 3-5절간장이 짧아지고, 지상부 생체중, 단위간 건물중이 많으며, 간 외경, 내경이 굵고 간 벽후가 두꺼워 내도복성인 소질을 보였다. 2. 생리적 특성변화의 추이를 보면, 저항성을 표시하는 좌절하중, 좌절시 Bending moment가 3월 추비구가 가장 높아 도복저항성이 강하였다. 3. 간의 만곡난이를 나타내는 단면계수, 단면 2차 moment등이 3월 추비구가 극히 높아 만곡이 되지 낳고 도복의 종합적인 표시방법인 도복지수가 낮아 도복의 저항성 및 강도가 가장 강하였다. 4. 3월 추비구는 수중이 높고 주당수량이 높아 적전추비기로 구명되었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제25권5호
• /
• pp.173-181
• /
• 2021

철근콘크리트 구조물은 다양한 환경에 노출되어 수분 침투로 인한 철근 부식이 발생하며, 부식으로 인한 구조물의 내구성능 저하 문제가 발생할 수 있다. 따라서 이러한 문제점을 해결하기 위해 철근에 비해 인장강도, 비부식성, 경량화 등 뛰어난 장점을 가진 FRP 보강근에 대한 연구가 활발히 진행되고 있다. FRP 보강근은 철근과 달리 항복 구간이 없으므로 파괴 시까지 선형탄성거동이 나타나고 탄성계수가 낮아 과도한 처짐이 발생할 수 있으므로 한계상태 조건에 대한 적용성 검토가 필요하다. 한계상태에서 FRP 보강 콘크리트 의 휨 설계 시 ACI 440.1R은 FRP 보강근의 재료적 불확실성을 고려하여 환경감소계수와 강도감소계수를 모두 적용하여 휨강도가 크게 낮아진다. 따라서 본 연구에서는 국내·외 다양한 문헌을 조사하여 유효단면이차모멘트 제안식의 처짐 해석 결과와 실험결과를 비교하였으며, ACI 440.1R 및 Fib bulletin 40의 설계휨강도를 분석하였다. 실험 결과에 따른 휨강도는 ACI 440.1R에 비해 Fib bulletin 40의 설계휨강도와 유사한 경향이 확인되었으며, 인장지배단면에서 ACI 440.1R은 설계휨강도를 보수적으로 평가하는 것으로 나타났다.