• Nuclear Engineering and Technology
• /
• 제56권1호
• /
• pp.64-69
• /
• 2024

According to the market research report, the nuclear decommissioning services market is currently experiencing considerable growth, with a projected Compound Annual Growth Rate (CAGR) of nearly 13% during the 2020-2024 forecast period. This expansion is primarily fueled by the advancement of Industry 4.0, in conjunction with the emergence of cutting-edge technologies such as the Internet of Things, big data, artificial intelligence, and 5G. Even though the fact that robots have already been utilized in the nuclear industry, their adoption has been hindered by conservative regulations. However, the nuclear decommissioning market presents an opportunity for the advancement of robotics technology. The British have already invested heavily in encouraging the use of intelligent robots for nuclear decommissioning, and other countries, such as Taiwan, should follow suit. Taiwan's flourishing robotics development industry in manufacturing, logistics, and other domains can be leveraged to introduce advanced robotics in the decommissioning of its nuclear power plants. By doing so, Taiwan can establish itself as a competitive player in the nuclear decommissioning services market for the next two decades.

• 한국기계가공학회지
• /
• 제15권4호
• /
• pp.16-22
• /
• 2016

This study is a structural analysis of 3" Cryogenic Safety Breakaway Coupling using a manufactured product from KLAW Company. Breakaway coupling is very important in the pipe system, especially when transporting fuel or gas in the pipeline. For the analysis of the patent infringement target, Dover and KLAW Company's technologies (US 08127785, EP 0764809) were analyzed. Finally, the flip-flap valve overlap was measured after combining the breakaway coupling through 3D modeling, and the valve overlap had a 0.7mm measurement value from the height gauge. The safety breakaway coupling consisted of a total of 62 pieces (body: 42, valve module: 21).

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.103-110
• /
• 2022

In the era of the 4th Industrial Revolution, smart technology being considered to improve productivity breakthroughs is in the spotlight as a means to replace traditional construction technology in the construction industry. However, various problems are occurring in construction sites using smart technology and causing negative impacts on construction projects. Therefore, the objective of this study is to identify risk factors that occur when smart technologies are used in construction projects. To achieve this purpose, this study investigated the difficulties at construction projects using smart technology, and risk factors were derived based on site surveys and literature. The risk factors were measured by experts, and then a total of 19 risk factors was derived by exploratory factor analysis. As a result, risks were classified as 5 factors, the institutional factor is the most difficult response, and the government needs anticipative system improvement and a long-term plan. The research findings provide practical implications for construction experts trying to apply smart technology in construction sites and construction policy-makers to revitalize smart technology.

• 한국응용과학기술학회지
• /
• 제30권4호
• /
• pp.656-663
• /
• 2013

본 연구는 식품으로 사용하고 있는 유산균의 보존성과 안정성을 높이고, 맛과 시각적인 차별화를 주기 위한 방법으로 더블매트릭스 캡슐화에 대한 제조방법에 대하여 기술하였다. 일차캡슐화방법으로 5wt%의 슈크로스에스터를 이용하여 부드럽고 촉촉한 크림을 만들었다. 더블매트릭스캡슐화는 키토산과 아르긴산을 1:3의 비율로 혼합하여 제조하였을 때 가장 안정한 캡슐이 형성되었다. 더블매트릭스 캡슐입자의 크기는 지름이 3mm이었다. 유산균의 pH변화에 대한 활성은 산성($pH=4.3{\pm}0.3$)이나 중성($pH=7.12{\pm}0.2$)상태에서보다 알칼리성 ($pH=10.5{\pm}0.3$)에서 더욱 우수한 활성을 보였다. 1개월 경과 후에서도 살아있는 유산균의 활성을 확인할 수 있었다. 식품산업에 응용으로 요거트안에 유산균캡슐이 함유된 제형과 5가지의 색상을 입힌 더블매트릭스캡슐을 개발하였다. 이상의 결과로 볼 때, 유산균을 안정화시키는 방법의 하나의 도구로써, 더블매트릭스캡슐이 식품산업에 크게 기여할 것으로 기대된다. 더 나아가 의약품산업에서 인슐린 등의 캡슐화를 통한 약물전달시스템 (drug delivery system) 및 화장품산업에서의 활성성분의 안정화 기술에 응용이 가능할 것으로 기대한다.

• 한국축산식품학회지
• /
• 제35권5호
• /
• pp.630-637
• /
• 2015

In the dairy industry, natural plant-based powders are widely used to develop flavor and functionality. However, most of these ingredients are water-insoluble; therefore, emulsification is essential. In this study, the efficacy of high pressure homogenization (HPH) on natural plant (chocolate or vanilla)-based model emulsions was investigated. The particle size, electrical conductivity, Brix, pH, and color were analyzed after HPH. HPH significantly decreased the particle size of chocolate-based emulsions as a function of elevated pressures (20-100 MPa). HPH decreased the mean particle size of chocolate-based emulsions from 29.01 μm to 5.12 μm, and that of vanilla-based emulsions from 4.18 μm to 2.44 μm. Electrical conductivity increased as a function of the elevated pressures after HPH, for both chocolate- and vanilla-based model emulsions. HPH at 100 MPa increased the electrical conductivity of chocolate-based model emulsions from 0.570 S/m to 0.680 S/m, and that of vanilla-based model emulsions from 0.573 S/m to 0.601 S/m. Increased electrical conductivity would be attributed to colloidal phase modification and dispersion of oil globules. Brix of both chocolate- and vanilla-based model emulsions gradually increased as a function of the HPH pressure. Thus, HPH increased the solubility of plant-based powders by decreasing the particle size. This study demonstrated the potential use of HPH for enhancing the emulsification process and stability of the natural plant powders for applications with dairy products.

• Journal of Information Technology Applications and Management
• /
• 제26권6호
• /
• pp.29-46
• /
• 2019

This study analyzed the factors influencing the technology acceptance of the general public in the drones and ARs, one of the key technologies of the industry 4.0. The theoretical basis was the extended unified theory of acceptance and use of technology model(UTAUT2), which uses performance expectancy, effort expectancy, social influence, facilitating conditions, and hedonic motivation as factors common to both services. The price value factor was excluded considering that most ARs were free, and the perceived risk factors, including privacy, which were not in UTAUT2, were included because they are important factors for ICT technology acceptance. The hypothesis was tested by structure equation model. Social influence and hedonic motivation had a positive(+) effect on intention to use technology. On the other hand, in the case of effort expectancy, neither the AR nor the drone had a significant influence on intention to use technology. Furthermore, performance expectancy had a positive(+) effect on intention to use in AR, but no significant influence was found out in drones. On the contrary, in the case of the facilitating conditions, the influence of the drones was positive (+), but the relation of AR was not investigated. The perceived risk was tested for the negative (-) influence of use intention of AR, but no significant relationship was found out for the drones. Among the significant influencing factors, hedonic motivation was the most powerful factor in AR and drones. Theoretical and practical implications are presented based on these results.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2011년도 추계학술발표회 논문집
• /
• pp.167-177
• /
• 2011

Renewable energy resources and technologies have the potential to provide long-lasting solutions of the global energy-requirements faced by the economic and environmental sectors of a nation. Therefore, waste money bills were used as renewable energy source for the production of bio-ethanol. In this study, different concentrated NaOH 0.5%. 1.0%, 2.0%, 3.0% and 0.0% (as a control) were used for 10, 20 and 30 mins at $121^{\circ}C$/15 psi in an autoclave. Saccharification and fermentation (aerobic and anaerobic) were carried out through commercial enzyme Celluclast 1.5 L, Novozymes 188 and Saccharomyces cerevisiae KCCM 11304 respectively. The results of pretreatment showed that the NaOH pre-treated substrate enhanced enzyme action and released more amount of glucose. The amount of glucose was found with the increasing concentration of NaOH and time $44996.95{\pm}6.30$, $46763.10{\pm}3.56$, $53421.32{\pm}4.72$, $63431.25{\pm}6.95$ and $56850.98{\pm}6.75\;ng/{\mu}l$ for 30 min respectively. As for bioethanol, the conversion rate of NaOH resulted $1010.08{\pm}4.71$, $1050.25{\pm}4.37$, $1109.49{\pm}4.39$, $1139.25{\pm}3.26$ and $1020.77{\pm}3.89$ ppm for aerobic; $16730.54{\pm}6.67$, $17076.45{\pm}6.25$, $17516.17{\pm}4.49$, $19782.68{\pm}6.19$ and $17973.39{\pm}7.50$ ppm for anaerobic and $18935.02{\pm}4.59$, $19895.45{\pm}5.39$, $21912.95{\pm}4.83$, $24895.21{\pm}6.72$ and $18961.21{\pm}4.90$ ppm for anaerobic condition with benzoic acid for respective condition. Thus, the results of the present work clearly revealed that with the increasing of alkali concentration might be more effective for bio-ethanol production from waste money bill, which is economic and environmental friendly.

• International Journal of Advanced Culture Technology
• /
• 제12권1호
• /
• pp.220-226
• /
• 2024

Accounting is one of the fields greatly affected by the Industrial Revolution 4.0 in general and the digital transformation trend in particular. However, the digital transformation process will also be a weakness if domestic accounting and auditing training activities do not adapt promptly and keep up with the practical requirements of social needs. Job opportunities in the accounting industry will shrink due to increased labor productivity and increasing support technologies, leading to a decrease in the need for traditional accountants. This paper focuses on clarifying the shortcomings and difficulties in accounting training activities by surveying 120 accounting lecturers teaching at domestic universities. Research results show that there are six existing factors and difficulties in accounting training activities due to the digital transformation process, including: facilities, lecturer capacity, training programs, teaching methods. teaching, assessment methods and practice and practice activities. Based on the survey results, we propose recommendations for training activities due to the impact of digital transformation at universities in Vietnam.

• 한국기계가공학회지
• /
• 제12권4호
• /
• pp.108-113
• /
• 2013

Industrialization and modernization of the beginning of the IT industry is growing very fast. Since telecommunications industry was developed rapidly, technologies about miniaturization and high-precision of parts have been actively developed to lead information revolution. generally, the entire shear surface of the product applying fine blanking technology must be very precise. Fine blanking is used to save cost by avoiding post-processing of the product. When using press blanking, it spends a lot of money on the production by using many post-processing. Fine blanking typically used in 0.5~18 mm thick steel plate. Because a lot of post-processing cost can be used to process, except for fine blanking. In order to develop components "CHANCE CONTENTS" in the fine blanking process, the purpose of this study is to minimize the edge of the bridge, secured 95% of the material thickness of the shear surface using the 1.6 mm thickness of the material SPCC. Blanking process by introducing after changing thickness through forging process, due to change in vee-rring force and counter force, the experimental amount of depressions and flatness and the shear surface were analyzed.

• Journal of Information Technology Applications and Management
• /
• 제24권4호
• /
• pp.41-55
• /
• 2017

Industrial Revolution is a concept and a development that has fundamentally changed our society and economy. Industry 4.0 focuses on the end-to-end digitization of all physical assets and integration into digital ecosystems with value chain partners. At present, we find ourselves at the beginning of this fourth stage, which is characterized by so-called "Cyber-Physical Systems". These systems are a consequence of the far-reaching integration of production, sustainability and customer-satisfaction forming the basis of intelligent network systems and processes. If South Korea ran toward global ICT with the advent of the Fourth Industrial Revolution, North Korea has adhered to a unique Juche science and technology. ICT in South Korea and North Korea seems very difficult to find common interests. However, as seen in the Internet and intranets, information and communication technology can find similarities in many areas than in general science and technology. There are many differences not only in the level of ICT and science and technology but also in the direction. And IT terminology and all technologies are also different. What are we preparing for the unification of North and South Korea? If we look at the science and technology sector at present, there seems to be no systematic preparation by the government. South Korea and North Korea need to be prepared for science and technology cooperation. First, it is necessary to understand the exact situation of North Korea's science and technology. In this study, we will perform research to establish mid and long term plans for revitalization of ICT cooperation between the two Koreas. In this study, we will determine the extent to which the two Koreas utilize ICT based on available ICT capabilities and technologies. To do this, we conducted research to measure and evaluate the ICT development index of North Korea using ICT international index.