• Journal of Industrial Convergence
• /
• v.20 no.8
• /
• pp.69-75
• /
• 2022

In order to prevent traffic accidents for children who are vulnerable to traffic around elementary schools, a school zone in the children's protection zone is designated, and parking and stopping are prohibited in this area as the vehicle speed is less than 30km/h. However, Korea has a disgrace that the death rate of children from traffic accidents is the No. 1 among OECD countries. Against this backdrop, this study aims to contribute to preventing traffic accidents and raising awareness of driver safety by establishing an illegal parking and stopping system in the child protection zone due to various road conditions in the child protection zone. As a research method, a plan to build a parking and stopping prevention system was presented based on major preceding studies and literature investigation and analysis. Through the construction plan, effects such as preventing traffic accidents, inducing smart drivers to drive safely, strengthening pedestrian safety awareness, and inducing driver's awareness of safety can be expected.

• Journal of Korean Institute of Industrial Engineers
• /
• v.23 no.2
• /
• pp.421-432
• /
• 1997

In general, Automated Storage/Retrieval Systems (AS/RS) have racks of equal size. But higher utilization of warehouse storage can be achieved by using AS/RS with racks of different size. Therefore those systems are adequate and efficient in current environment. In this paper, travel time models are developed for AS/RS with racks of different size under randomized storage in each zone. Each zone has its own rack size. In order to confirm the proposed travel time models, some numerical examples are given.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.60-66
• /
• 2020

This paper presents a method for improving the selection of boundary areas suitable for Korea's situation based on domestic and foreign case studies on the establishment of boundary areas to protect people and the environment from chemical substances in response to chemical accidents and chemical terrorism. Currently, various related ministries are divided into hot zones, warm zones, and cold zones in common, but in specific areas, they are used in different ways in terms of terminology utilization. Therefore, it was suggested that the boundary areas be divided into four zones: hot zone, warm zone, cold zone, and safety zone. In addition, the terms warm zone and safety zone should be re-established. The existing ERPG acute exposure standard does not take into account various exposure times. Therefore, it is unsuitable for long-term exposure, so the priority of application should be AEGL, ERPG, PAC, and IDLHs. The CARIS information provision method is classified into substances that can or cannot be diffused or classified as indoor leaks. In addition, the wind direction trust line and the ERG's initial separation distance and protective action distance are expressed together so that they can be used for accident responses.

• Journal of Powder Materials
• /
• v.25 no.4
• /
• pp.331-335
• /
• 2018

This study investigates the directional recrystallization behavior of Ni based oxide dispersion strengthened (ODS) alloy according to the zone annealing velocity. The zone annealing temperature is set as $1390^{\circ}C$, while the zone velocities are set as 2.5, 4, 6, and 10 cm/h, respectively. The initial microstructure observation of the as-extruded sample shows equiaxed grains of random orientation, with an average grain size of 530 nm. On the other hand, the zone annealed samples show a large deviation in grain size depending on the zone velocities. In particular, grains with a size of several millimeters are observed at 2.5-cm/h zone velocity. It is also found that the preferred orientation varies with the zone annealing velocity. On the basis of these results, this study discusses the role of zone velocities in the directional recrystallization of Ni base ODS alloy.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2006.05a
• /
• pp.7.1-7.1
• /
• 2006

• Journal of Korea Port Economic Association
• /
• v.31 no.1
• /
• pp.51-68
• /
• 2015

Recently, it has been emphasized that 'marine special economic zone' need to be designated and developed. Therefore, the purpose of this paper is to analyse on successful growth factors of 'marine special economic zone'. This study deals with the terms of three connection success factors which are a firm's subjective factors, a industrial environment factors, and a governmental policy factors. According to analysis results of the three successful growth factors, a firm's subjective factors(4.11 score) are scored at the most ones of the three successful growth factors, to be compared with a industrial environment factors(3.89 score). with a government policy factors(3.72 score). Therefore, first of all, it is important to enhance competitiveness of 'marine special economic zone' through as follows, a firm's subjective factors : (1) to procure concentrated market strategy and real market capacity, (2) to promote customer service, (3) to procure speedy satisfaction of customer needs and confidence, (4) to enhance competitiveness through standing in a trio of connection growth model. And, the next, we have to enhance competitiveness of 'marine special economic zone' through considering a industrial environment factors, that is, sustainable growth of marine industry, clustering of marine industry, expansion of infrastructure, etc., and a government policy factors, that is, leading law improvement and policy of leading 'marine special economic zone' designation and development, etc.,

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.8
• /
• pp.855-860
• /
• 2011

We numerically simulated a dissolved air flotation (DAF) tank to predict the performance of the pilot facility. The flow was assumed to be two-dimensional and two-phase. The velocity distributions in the separation zones of differently shaped DAFs were compared to find the effect of the shape on the performance. The results showed that the typical flow pattern that appeared in a well-designed DAF-tank was generated in the separation zone of the base model. This flow pattern could be maintained while the baffle height was sufficiently tall regardless of the other geometric parameters. However, the baffle height and angle, the contact zone width, and the perforated plate affected the uniformity of the downward flow in the separation zone. Except for the baffle height, the base model used in this study showed a better uniformity of downward flow than did other models with different geometric parameters.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.2
• /
• pp.885-892
• /
• 2012

Coastal zone management indicators are being used as an important means of decision making in the process of policy establishment for integrated coastal management and implementation, and these indicators are very useful tools that enable the evaluation of the coastal zone management from an integrated perspective, the understanding and analysis of interactions according to each department. Accordingly, most of organizations in international society and advanced coastal states tend to develop coastal zone management indicator system in order to check current coastal environment, social and economic status, also to grasp effectiveness of the coastal zone management policy. In this research, therefore, the characteristics of coastal zone management indicator system was drawn through understanding of strength and weakness, and conducting comparative analysis of the coastal zone management indicator system according to each level having classified domestic and international coastal zone management indicator system into three aspects at large: natural and environmental aspect; social and economic aspect; and network aspect. As a result, following features were drawn as the common characteristics among the cases in the advanced coastal states: the management means for realization of sustainable coastal zone management; scientific decision making tools for various stakeholders; evaluation means for effectiveness of coastal zone integrated management; and dualization of coastal zone management indicator system; etc. Lastly, based on these common values revealed in the domestic and international coastal management indicator system, a suggestion for correct establishment of the domestic coastal management indicators was proposed in the regional aspect.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.521-527
• /
• 2020

In offshore structures, the mean viscous drift force due to drag is considered to be a design part that has not been considered until recently. In particular, it is most important to calculate the drift force acting on a vertical cylinder considering both waves and currents in the low frequency region. This paper presents a process for deriving analytical solutions for the drift forces acting on a fixed vertical cylinder considering waves and currents. The area of the cylinder was considered by dividing it into a splash zone above the free surface and a submerged zone below the free surface. The presence of waves is considered only in the Splash Zone, and in the case of waves and currents, the equations were obtained for both the splash and submerged zones. The results show that drift forces occur due to the significant viscous effects in both the splash zone and the submerged zone. Therefore, the analytical solutions derived in this study can be used to calculate the drift force using the given design variables and form a theoretical basis for judging whether the magnitude of the drift force in each case has a dominant influence within a specific physical range.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.1
• /
• pp.75-80
• /
• 2009

Bum-in test is one for eliminating semiconductor devices that are subject to early failures and other operational problems; it is usually carried out on the devices by imposing severe test conditions such as elevated voltages, temperatures, and time. In order for such a test to be performed, each burn-in board having devices to be tested, needs to be inserted into a corresponding slot. A set of such slots is called a zone. The slots comprising a zone can only have the burn-in boards with the devices of the same type. In order to test many different types of semiconductor devices, it is desirable to build a burn-in test system to have as many zones as possible. A zone controller controlling a zone, is a device that performs a burn-in test and collects test results. In case of existing systems, each zone controller takes care of a zone that consists of a fixed number of slots. Since a zone controller is, in most cases, embedded into a workstation that controls the overall testing process, adding new zone controllers is restricted by the spaces for them. As a way to solve or alleviate these problems, a dynamic zone system in which the number of slots in a zone can be dynamically allocated, is presented. This system maximizes the efficiency of system utilization, by altering the number of slots and hence minimizing the idle slots of a zone. In addition, all the test operations being performed must be aborted for maintenance in existing systems. In dynamic zone systems, however, a separate and independent maintenance is allowed for each slot, as long as the main power supply system has no problem.