• Journal of Korean Institute of Industrial Engineers
• /
• v.28 no.2
• /
• pp.139-146
• /
• 2002

The third generation mobile communication needs to provide multimedia service with increased data rates. Thus an efficient allocation of radio and network resources is very important. This paper models the 'burst switching' as an efficient radio resource allocation scheme and the performance is compared to the circuit and packet switching. In burst switching, radio resource is allocated to a call for the duration of data bursts rather than an entire session or a single packet as in the case of circuit and packet switching. After a stream of data burst, if a packet does not arrive during timer2 value ($\tau_{2}$), the channel of physical layer is released and the call stays in suspended state. Again if a packet does not arrive for timerl value ($\tau_{1}$) in the suspended state, the upper layer is also released. Thus the two timer values to minimize the sum of access delay and queuing delay need to be determined. In this paper, we focus on the decision of $\tau_{2}$ which minimizes the access and queueing delay with the assumption that traffic arrivals follow Poison process. The simulation, however, is performed with Pareto distribution which well describes the bursty traffic. The computational results show that the delay and the packet loss probability by the burst switching is dramatically reduced compared to the packet switching.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.7
• /
• pp.4554-4561
• /
• 2014

In recent years, several paradigms have been identified to simplify the design of fault-tolerant distributed applications in a conventional static system. Leader Election is among the most noticeable, particularly because it is closely related to group communication, which provides a powerful basis for implementing active replications among other uses. On the other hand, despite its usefulness, to our knowledge, no study has focused on this problem in a mobile computing environment. The aim of this paper was to propose an algorithm for the leader election protocol in a fixed station based wireless networks environment. The election algorithm is much more efficient than other election algorithms in terms of the fault tolerance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.10
• /
• pp.4740-4744
• /
• 2012

The purpose of this paper was to make a LED light control module using Zigbee. The module was made so that brightness of the LED light changes according to the ambient brightness. A 8-bit microcontroller was used to implement the module to enable LED dimming and wireless light intensity measurement. Using the proposed method, power consumption can be improved by up to 48% on average, with 3.4-0.4W changes in power. The measured ambient light intensity values are converted from analog to digital and outputted as a PWM waveform. According to the output waveform and changes in the current outputted from the LED driver, the brightness of the LED light is controlled. Also, Zigbee with close-range wireless communication capabilities was used to enable wireless transmission of light intensity measurements.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.2
• /
• pp.71-75
• /
• 2003

The distribution model of multimedia content is proposed, This solves the problems which are occurred by various multimedia content and the complex distribution structure. The online distribution processes in wireless environments contain many different, companent from the of offline and wire networks. The multimedia content can be very easily propagated illegally. Under these environments the seneme to protect the copyrights of multimedia content and rights of distribution entities is needed. In this paper a distribution framework of content in wireless environment based on MPFG-21 framework if proposed. This model can be adapted to DRM(digital rights management) and utilized to protect the rights of distribution entities.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.12
• /
• pp.4991-4996
• /
• 2010

Clustering method in wireless sensor network is the technique that forms the cluster to aggregate the data and transmit them at the same time that they can use the energy efficiently. Even though cluster group model is based on clustering, it differs from previous method that reducing the total energy consumption by separating energy overload to cluster group head and cluster head. In this thesis, I calculate the optimal cluster group number and cluster number in this kind of cluster group model according to threshold of energy consumption model. By using that I can minimize the total energy consumption in sensor network and maximize the network lifetime. I also show that proposed cluster group model is better than previous clustering method at the point of network energy efficiency.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.1
• /
• pp.43-52
• /
• 2014

P-wave characteristic in the human electrocardiogram (ECG) is important in the diagnosis of atrial conduction pathology. In this paper, we measured an ECG signal from patient with cardiovascular disease using one lead ECG electrode system which is based on the wireless cardiac monitoring system. And we detected a P-wave in ECG signal using the complex-valued continuous wavelet transforms (CWT) according to two kinds of patch type electrodes such as an existing narrow patch type electrode and the improved wide patch type electrode presented in this paper. Also, we compared the characteristics in detecting the P-wave in terms of the magnitude and the width of P-waves. From the results of comparison we found that the width and the magnitude of P-wave detected using the wide patch type electrode is improved to be interpreted easier compared to those using the narrow patch type electrode. Furthermore, we have also proven that the complex-valued CWT can be used as a robust detector for P-wave in ECG signal analysis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.6
• /
• pp.2754-2759
• /
• 2011

With information communications and RFID/USN environments merged wire/wireless networks are generalized. In this viewpoint, WAP is used by communication protocol for the data communication in the field of wireless environment. WTLS developed for the secure communications optimize TLS adapted wireless environment in the TCP/IP internet protocol. But WTLS denote WAP security problem, end-to-end problem, and power consumption, etc. Therefore in this paper we proposed WTLS cryptographic algorithm eliminated WTLS disadvantages. Proposed algorithm solved power consumption, calculated complexity, and security problems because it is not unique but hybrid form.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.10
• /
• pp.2766-2770
• /
• 2009

Recently, the Green IT is noticed because of the effects of greenhouse gas emissions, a drain on natural resources and pollution. In this paper, Visible Light Communication (VLC) systems with Turbo Coded scheme using LED is proposed and simulated in an optical wireless channel. As a forward error correction scheme to reduce information losses, turbo coding was employed. To decode the codewords, The Map (Maximum a Posteriori) algorism and SOVA (Soft Output Viterbi Algorithm) is used. The above mentioned schemes are described and simulation results are analyzed. As using turbo codes scheme, BER performance of proposed VLC systems is improved about 5 [dB].

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.264-266
• /
• 2005

Recently, on-line diagnosis methods through wired and wireless networks are widely adopted in the diagnosis of industrial Electric Facilities, such as generators, transformers and motors. Also smart sensors which includes sensors, signal conditioning circuits and micro-controller in one board are widely studied in the field of condition monitoring. This paper suggests an self-powered system suitable for condition-monitoring smart sensors, which uses parasitic vibrations of the facilities as energy source. First, vibration-driven noise patterns of the electric facilities are presented. And then, an electromagnetic generator which uses mechanical mass-spring vibration resonance are suggested and designed. Finally energy consumption of the presented smart sensor, which consists of MEMS vibration sensors, signal conditioning circuits, a low-power consumption micro-controller, and a ZIGBEE wireless tranceiver, are presented. The usefulness and limits of the presented electromagnetic generators in the field of electric facility monitoring are also suggested.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.1
• /
• pp.92-95
• /
• 2010

A sow has a characteristic changing in its temperature. It is a suitable time that is decreasing after sow's body temperature increased to the highest point. We observe the variation of temperature through USN(Ubiqutous Sensor Network) system using wireless sensor inserted in the womb. The wireless sensor send massage to user's server and its server send SMS massage to user's cell phone. We contribute to user's income increase as it notice to suitable fecundation.