• 제목/요약/키워드: Industrial parts

검색결과 2,153건 처리시간 0.034초

일부 금속 및 기계제품 제조업체 근로자들의 산업재해($1980{\sim}1981$)에 관한 조사 (An Epidemiological Study on the Industrial Injuries among Metal Products Manufacturing Workers in Young-Dung-Po, Seoul)

  • 이정희
    • Journal of Preventive Medicine and Public Health
    • /
    • 제15권1호
    • /
    • pp.187-196
    • /
    • 1982
  • 1980. 1. 1부터 1981. 12. 31까지 만 2년간 서울 영등포 지역의 12개 금속 및 기계제품 제조업체 근로자들의 산업재해의 특성을 조사하여 얻은 결과는 다음과 같다. 1. 재해 발생율은 근로자 1000명당 45.7이며 남자 54.0, 여자 17.5로 남자에서 약 3배 이상 많이 발생하고 규모가 클수록 발생율이 감소하는 경향을 보였다. 2. 재해자들의 연령별 발생율은 19세 미만이 83.5로 제일 높고 $40{\sim}49$세가 가장 낮았다. 3. 근속 연수별 발생 분포는 1년 이하인 자가 48.1%로 근속연수가 짧을수록 재해빈도는 높았다. 4, 작업 개시 후 시간적 변동에 따른 발생율은 작업 개시 후 3시간이 6.0, 7시간이 6.1로 두 정점을 이루었다. 5. 요일별 재해 발생율은 월요일이 8.4(18.3%)로 가장 높았고 일요일이 가장 낮았다. 6. 월별 재해 발생율은 7월에 5.4(11.8%)로 가장 높았고 다음이 3월로 4.8(10.5%)였다. 계절별 발생율은 봄철에 13(28.4%)로 가장 높았다. 7. 재해원인별 발생빈도는 기계에 의한 것이 37.5%로 가장 높고, 다음이 기구없이 취급, 낙하물, 충돌에 의한 것이 각각 17.2%, 14.2% 및 10.2%를 차지하였다. 8. 상해 부위별 발생빈도는 상지부(上肢部)가 58.8% 하지부(下肢部)가 25.5%로 상하지(上下肢)가 전체의 84.3%였으며 이중 수지(手指)가 40.3%로 빈도가 제일 높았으며 좌우별 분포는 우측이 10%정도 많았다. 9. 상해 종류별 발생빈도는 열창 및 좌창이 34.0%로 가장 높았고 다음이 골절 및 탈구로 31.9%, 염좌 8.1%의 순이었다. 10. 요양 기간별 발생 분포는 2주에서 1개월이 54.4%로 가장 높았고 1개월 미만이 전체의 68.9%로 대부분이었으며 업체 규모가 클수록 치료기간이 연장되는 경향을 보였다. 11. 산재분 재해 대 비산재분 재해의 비율은 1:4.7이었다.리양상(解離樣相)은 거의 비슷하게 완만(緩慢)하였다. 4. 이상(以上)의 소견(所見)으로 미루어 볼 때 임신부(姙娠婦)의 CO 중독(中毒)은 산모(産母)보다 태아(胎兒)에서 더 큰 위해(危害)를 초래(招來)할 가능성(可能性)이 크며 또 HbF의 구성점유율(構成占有率)이 높은 6개월(個月) 이하(以下)의 영아에서도 그 위해도(危害度)가 클 것으로 간주(看做)된다. 따라서 임신부(姙娠婦) 또는 생후(生後) 6개월(個月) 이하(以下)의 영아가 CO 중독(中毒)되었을 때는 고압산소요법(高壓酸素療法)이 효과적(效果的)인 치료법(治療法)으로 보이며 그 치료시간(治療時間)을 성인환자(成人患者)에 있어서의 그것보다 좀 더 길게하는 것이 CO 중독(中毒)에 의한 위해(危害)를 감소(減少)시켜 줄 것으로 기대(期待) 된다. 있었다. 또한 공정 중 microwave와 autoclaving은 4가지 수산식품 낙지, 조기, 홍어, 새우의 allergenicity를 현저히 감소시키는 것으로 나타났다. 반면에 자외선은 단백질로 구성된 allergen의 구조는 크게 변화시키지 못하는 것으로 보여진 것을 알 수 있다. 그러므로 생선의 가공방법은 통조림 가공이나 microwave 처리가 allergenicity성을 감소시킬 수 있는 것으로 보여진다. 낙지, 조기, 홍어, 새우의 한외여과 fraction중 고분자인 100,000이상에서만 allergenicity가 나타났다. 따라서 이 allergen들의 분자량은 100,000 이상으로 추정되며 검색된 allergynicity 생선을 10,000∼100,000으로 한외여과 하였을 때 100,000 이상의 fraction에서만 PCA에 의해 allergenicity가 있는 것으로 인정되었다. 그러나 이 검색된 생선이 anaphylaxis가 인간에게서까지도 반응할지는 의문이다. 이 연구의 결과는 차후 임상실험환자에 의하여 최종 검증되어야 한다.일정한 관련성을 나타내지 않았다. 이상의 결과로

  • PDF

참여자관점에서 공급사슬관리 시스템의 성공에 영향을 미치는 요인에 관한 실증연구 (An Empirical Study on the Determinants of Supply Chain Management Systems Success from Vendor's Perspective)

  • 강성배;문태수;정윤
    • Asia pacific journal of information systems
    • /
    • 제20권3호
    • /
    • pp.139-166
    • /
    • 2010
  • The supply chain management (SCM) systems have emerged as strong managerial tools for manufacturing firms in enhancing competitive strength. Despite of large investments in the SCM systems, many companies are not fully realizing the promised benefits from the systems. A review of literature on adoption, implementation and success factor of IOS (inter-organization systems), EDI (electronic data interchange) systems, shows that this issue has been examined from multiple theoretic perspectives. And many researchers have attempted to identify the factors which influence the success of system implementation. However, the existing studies have two drawbacks in revealing the determinants of systems implementation success. First, previous researches raise questions as to the appropriateness of research subjects selected. Most SCM systems are operating in the form of private industrial networks, where the participants of the systems consist of two distinct groups: focus companies and vendors. The focus companies are the primary actors in developing and operating the systems, while vendors are passive participants which are connected to the system in order to supply raw materials and parts to the focus companies. Under the circumstance, there are three ways in selecting the research subjects; focus companies only, vendors only, or two parties grouped together. It is hard to find researches that use the focus companies exclusively as the subjects probably due to the insufficient sample size for statistic analysis. Most researches have been conducted using the data collected from both groups. We argue that the SCM success factors cannot be correctly indentified in this case. The focus companies and the vendors are in different positions in many areas regarding the system implementation: firm size, managerial resources, bargaining power, organizational maturity, and etc. There are no obvious reasons to believe that the success factors of the two groups are identical. Grouping the two groups also raises questions on measuring the system success. The benefits from utilizing the systems may not be commonly distributed to the two groups. One group's benefits might be realized at the expenses of the other group considering the situation where vendors participating in SCM systems are under continuous pressures from the focus companies with respect to prices, quality, and delivery time. Therefore, by combining the system outcomes of both groups we cannot measure the system benefits obtained by each group correctly. Second, the measures of system success adopted in the previous researches have shortcoming in measuring the SCM success. User satisfaction, system utilization, and user attitudes toward the systems are most commonly used success measures in the existing studies. These measures have been developed as proxy variables in the studies of decision support systems (DSS) where the contribution of the systems to the organization performance is very difficult to measure. Unlike the DSS, the SCM systems have more specific goals, such as cost saving, inventory reduction, quality improvement, rapid time, and higher customer service. We maintain that more specific measures can be developed instead of proxy variables in order to measure the system benefits correctly. The purpose of this study is to find the determinants of SCM systems success in the perspective of vendor companies. In developing the research model, we have focused on selecting the success factors appropriate for the vendors through reviewing past researches and on developing more accurate success measures. The variables can be classified into following: technological, organizational, and environmental factors on the basis of TOE (Technology-Organization-Environment) framework. The model consists of three independent variables (competition intensity, top management support, and information system maturity), one mediating variable (collaboration), one moderating variable (government support), and a dependent variable (system success). The systems success measures have been developed to reflect the operational benefits of the SCM systems; improvement in planning and analysis capabilities, faster throughput, cost reduction, task integration, and improved product and customer service. The model has been validated using the survey data collected from 122 vendors participating in the SCM systems in Korea. To test for mediation, one should estimate the hierarchical regression analysis on the collaboration. And moderating effect analysis should estimate the moderated multiple regression, examines the effect of the government support. The result shows that information system maturity and top management support are the most important determinants of SCM system success. Supply chain technologies that standardize data formats and enhance information sharing may be adopted by supply chain leader organization because of the influence of focal company in the private industrial networks in order to streamline transactions and improve inter-organization communication. Specially, the need to develop and sustain an information system maturity will provide the focus and purpose to successfully overcome information system obstacles and resistance to innovation diffusion within the supply chain network organization. The support of top management will help focus efforts toward the realization of inter-organizational benefits and lend credibility to functional managers responsible for its implementation. The active involvement, vision, and direction of high level executives provide the impetus needed to sustain the implementation of SCM. The quality of collaboration relationships also is positively related to outcome variable. Collaboration variable is found to have a mediation effect between on influencing factors and implementation success. Higher levels of inter-organizational collaboration behaviors such as shared planning and flexibility in coordinating activities were found to be strongly linked to the vendors trust in the supply chain network. Government support moderates the effect of the IS maturity, competitive intensity, top management support on collaboration and implementation success of SCM. In general, the vendor companies face substantially greater risks in SCM implementation than the larger companies do because of severe constraints on financial and human resources and limited education on SCM systems. Besides resources, Vendors generally lack computer experience and do not have sufficient internal SCM expertise. For these reasons, government supports may establish requirements for firms doing business with the government or provide incentives to adopt, implementation SCM or practices. Government support provides significant improvements in implementation success of SCM when IS maturity, competitive intensity, top management support and collaboration are low. The environmental characteristic of competition intensity has no direct effect on vendor perspective of SCM system success. But, vendors facing above average competition intensity will have a greater need for changing technology. This suggests that companies trying to implement SCM systems should set up compatible supply chain networks and a high-quality collaboration relationship for implementation and performance.

토양에 점토광물 일라이트 처리시 고추의 생장에 미치는 영향 (Effect of Different Levels of Applications of Illite on the Growth of Red Pepper in Soil)

  • 이석언;김덕현;홍현기;권상문;이문순;우선희;정근욱
    • 한국토양비료학회지
    • /
    • 제45권3호
    • /
    • pp.339-343
    • /
    • 2012
  • 점토광물 일라이트를 이용하여 고추의 생육증진 효과를 평가하기 위하여 2010년 충북대학교 농업생명환경대학 농장에서 시험을 수행 하였다. 시험은 토양을 이용하여 수행하였으며 일라이트 처리는 기준량 처리 1:20 (w/w), 2배량 처리 1:10 (w/w)로 처리하였으며 재배기간 동안 수분공급 이외에 다른 영양성분은 일체 공급하지 않았다. 고추는 대촌을 선택하여 실험하였으며 작물의 양이온 K, Ca, Mg의 흡수량을 측정하여 일라이트 처리에 따른 효과의 차이를 평가하였다. 6주간의 생육 특성을 비교 해본 결과 고추는 무처리구 대비 7~31%의 생장이 증가함을 보였다. 처리량에 따른 고추의 뿌리, 줄기, 잎에서의 무처리구 대비 처리구의 흡수량은 K가 무처리구 대비 뿌리에서 2~8%, 줄기 34~68%, 잎에서 30~76%, Ca는 뿌리에서 -4~23%, 줄기에서 49~107%, 잎에서 22~49%, Mg는 뿌리는 -3~21%, 줄기에서 38~126%, 잎은 32-93%의 차이를 보였다. 이를 통해 고추 대촌은 일라이트 처리량에 따라 양분흡수량이 증가한다는 것을 확인할 수 있었다. 이 점으로 인하여 고추의 생장에 차이가 발생하였다고 여겨진다.

환경영향평가와 환경위험의 평가 (Environmental Impact Assessment and Evaluation of Environmental Risks)

  • Niemeyer, Adelbert
    • 환경영향평가
    • /
    • 제4권3호
    • /
    • pp.41-48
    • /
    • 1995
  • In former times the protection of our environment didn't play an important role due to the fact that emissions and effluents were not considered as serious impacts. However, opinions and scientific measurements meanwhile confirmed that the impacts are more serious than expected. Thus measures to protect our earth has to be taken into consideration. A part of these measures in the Environmental Impact Assessment (EIA). One of the most important parts of the EIA is the collection of basic datas and the following evaluation. Experience out of the daily business of Gerling Consulting Group shows that the content of the EIA has to be revised and enlarged in certain fields. The historical development demonstrated that in areas in which the population and the industrial activities reached high concentration there is a high necessity to develop strict environmental laws and regulations. Maximum values of the concentration of hazardous materials were fixed concerning the emission into and water. Companies not following these regulations were punished. The total amount of environmental offences increased rapidly during the last decade, at least in Germany. During this development the public consciousness concerning environmental affairs increased as well in the industrialized countries. But it could clearly be seen that the development in the field of environmental protection went into the wrong direction. The technologies to protect the environment became more and more sophisticated and terms as: "state of the art" guided more and more to lower emissions, Filtertechnologies and wastewater treatment for example reached a high technical level-but all these sophisticated technologies has one and the same characteristic: they were end-of-the pipe solutions. A second effect was that this kind of environmental protection costs a lot of money. High investments are necessary to reduce the dust emission by another ppm! Could this be the correct way? In Germany the discussion started that the environmental laws reduce the attractivity to invest or to enlarge existing investments within the country. Other countries seem to be not so strict with controlling the environmental laws which means it's simply cheaper to produce in Portugal or Greece. Everybody however knows that this is not the correct way and does not solve the environmental problems. Meanwhile the general picture changes a little bit and we think it changes into the correct direction "End-of-the-pipe" solutions are still necessary but this word received a real negative touch and nobody wants to be brought into connection with this word received a real negative touch and nobody wants to be brought into connection with this word especially in connection with environmental management and safety. Modern actual environmental management starts in a different way. Thoughts about emissions start in the very beginning of the production, they start with the design of the product and modification of traditional modes of production. Basis of these ideas are detailed analyses of products and processes. Due to the above mentioned facts that the public environmental consciousness changed dramatically a continous environmental improvement of each single production plant has to be guarantied. This question is already an important question of the EIA. But it was never really checked in a wholistic approach. Environmental risks have to be taken into considerations during the execution of an EIA. This means that the environmental risks have to be reduced down to a capable risk-level. Environmental risks have to be considered within the phase of planning, during the operation of a plant and after shut down. The experience shows that most of the environmental relevant accidents were and caused by human fault. Even in highly protected plants the human risk-factor can not be excluded during evaluation of the risk-potential. Thus the approach of an EIA has to regard technical evaluations as well as organizational thoughts and the human factor. An environmental risk is a threat to the environment. An analysis of the risk concerning the organizational and human aspect however never was properly executed during an EIA. A possible solution could be to use an instrument as the actual EMAS (Environmental Management System) of the EC for more accurate evaluation of the impact to the environment during an EIA. Organizations or investors could demonstrate by an approved EMAS or even by showing their installment of EMAS that not only the technical level of the planned investment meets the requested standards but as well the actual or planned management is able to reduce the environmental impact down to a bearable level.

  • PDF

동백나무 잎과 꽃 추출물의 항미생물 활성 및 항산화 효과 (Antifungal and Antioxidant Activities of Extracts from Leaves and Flowers of Camellia japonica L.)

  • 이숙영;황은주;김지혜;최영복;임채영;김선민
    • 한국약용작물학회지
    • /
    • 제13권3호
    • /
    • pp.93-100
    • /
    • 2005
  • 천연물은 예로부터 건강의 증진 및 질병의 치료를 위하여 다양하게 이용되어 왔다. 특히 천연물 및 식품류에 포함되어 있는 폴리페놀성 화합물들은 항산화, 암세포 성장억제, 항돌연변이 등 다양한 생리활성을 나타내어 심혈관계 질환 및 암의 치료와 예방제로서의 활용 가능성을 검토하는 많은 연구가 이루어지고 있다. 따라서 본 연구에서는 동백나무의 기능성 물질 확보와 가공을 통한 고부가가치 창출을 목표로 국내에서 자생하는 동백나무를 부위별로 추출물을 제조하여 항산화 및 항미생물 활성을 평가하고자 하였다. 항산화효과는 항산화력 성분인 총페놀 화합물의 함량과 BPPH radical 소거법을 이용하여 항산화 활성을 측정하였는데 총페놀 화합물의 함량은 동백나무 부위별 추출물의 건조중량 100 g에 대하여 어린잎, 꽃봉오리 및 꽃 추출물에 각각 74.24mg , 65.02mg, 그리고 62.42mg로 나타났다. Free radical소거활성을 공존시킨 DPPH의 50%를 환원시키는데 필요한 시료의 양 $(RC_{50})$은 어린잎, 꽃봉오리 그리고 꽃의 추출물에서 각각 7.16 ${\mu}g/m{\ell}$, 14.45 ${\mu}g/m{\ell}$ 및 18.4 ${\mu}g/m{\ell}$의 낮은 농도로 활성을 나타내어 기존의 합성 항산화제인 BHT의 61.23 ${\mu}g/m{\ell}$보다 높은 항산화 효과를 나타내어 천연 항산화제로서 이용 가능성을 보여주었다. 또한 B. subitillis, S. fradiae, S. aureus, E. coli, P. aeruginosa, Enterbacter spp. C1036 및 S. typhimurium 7종의 시험균을 사용하여 동백나무 부위별 추출물의 항균활성을 측정 하였는데 어린잎의 경우 15 ${\mu}g/m{\ell}$의 농도에서 $9{\sim}13mm$의 투명환을 보여 비교적 높은 항미생물 활성을 나타내었고, 꽃봉오리 추출물을 첨가하였을 때 P. aeruginosa와 Enterbacter spp. C1036 균주에서 가장 장한 억제활성을 나타내었다. 7종의 시험균에 대한 항균력이 가장 높았던 어린일 추출물의 최소저해농도 (MIC)는 $1{\sim}15으로 나타났으며, 그람양성균이 그람음성균보다 각 농도에서 최소저해농도의 효과가 더 높은 것으로 나타났다.

독일의 창업정책과 정책적 시사점 (Some lessons from German startup policies)

  • 김영우
    • 벤처혁신연구
    • /
    • 제1권1호
    • /
    • pp.49-65
    • /
    • 2018
  • 독일의 창업정책은 크게 3가지로 구성된다. 먼저 창업대상을 세 구간(line)으로 구분해 체계적으로 지원하는 엑지스트 (Exist) 제도는 EU집행위에서 우수 중소기업 지원사례로 선정돼 역내국 적용확대를 권고받고 있다. 다음은 산업체의 기술혁신을 장려하기 위해 운영하는 자금지원 프로그램인 ZIM을 들 수 있다. 끝으로 일자리 창출정책도 창업에 크게 기여한 것으로 조사되고 있다. 독일 창업정책의 특성은 첫째, 독일은 기술기반 창업의 특성을 가지고 있다. 독일은 2002년부터 하르츠개혁을 통해 기술기반형 창업제도에 집중하고 있음을 확인할 수 있다. 특히 세계 산업구조의 변화에 대응하기 위해 신기술 창업기업이 그 역할을 담당 한다고 판단하고 있다.. 둘째, 장기적인 관점에서 접근하고 있다. 바로 이런 점에서 독일의 창업정책을 포함한 중소기업 정책은 일관성을 가질 수 있으며 시대의 흐름에 따르기 보다는 기본에 충실한 정책 결정을 내릴 수 있는 전통을 만든 것으로 보인다. 셋째, 수요자 위주의 정책을 실시하고 있다. 독일의 창업정책은 기술기반형 정책과 새롭게 등장하는 과제인 일자리 창출로 요약된다. 이에 따른 정책 대응은 고용시장정책이라는 큰 흐름에서 시대에 맞게 변용하여 최선의 정책 조합을 추구한다는 점이다. 여기서 중요한 점은 정책입안과 추진과정에서 공급자 위주가 아니라 수요자 위주로 정책을 만든다는 점이다.

Stretch 소재를 사용한 여성용 Bodysuit Sleeve 원형 설계에 관한 연구 (A Study on the Women's Bodysuit Sleeve Block Construction Using Stretch fabrics)

  • 박진아
    • 한국의류학회지
    • /
    • 제29권12호
    • /
    • pp.1535-1545
    • /
    • 2005
  • 신축성 소재 여성용 바디수트 원형 설계에 관한 선행연구에서 개발된 바디수트의 진동둘레길이 항목을 적용한 소매원형 제도방법이 제안되었다 본 연구는 선행연구와 연속적 맥락에서, 첫째, 신축성 소재의 물성을 고려한 패턴축소율의 적용을 제시하고 둘째, 그에 따라 개발된 여성용 바디수트 소매원형의 제도방법의 단계별 서술을 통해 교육 및 산업분야에서의 사용을 목적으로 하였다. 본 연구를 위하여 광범위하게 사용되고 있는 기존의 소매원형 제도방법을 우선, 선정하여(i.e. Joseph-Armstrong: T1, Shoben & Ward: T2, Esmod: T3 그리고 Joseph-Armstrong 절충식 : T4) 분석하였다. 그 가운데 소매의 앞 뒤차가 반영되지 않는(i.e. T1) 것과 반영되는(i.e. T2, T3 그리고 T4) 방법으로 나누어 구분하고 그에 따른 바디수트 소매샘플을 선행연구와 동일한 신축성 소재$(wale: 50\%/course: 70\%)$를 사용하여 제작한 후, 5인의 전문평가단을 구성하여 그 외관과 동작적합성을 평가하였다. 외관평가에서 관찰된 항목은 앞, 옆, 뒤 바디수트 소매의 여유분, 중심선의 위치와 소매길이, 그리고 바디수트 몸판과의 조화정도의 총 13항목이었고, 쾌적성 평가에서는 전방수직, 측방수직, 측방수평 3동작을 통해 실험의의 동작적합성을 평가하였으며 최종적으로 외관과 동작성이 적절히 조화된 바디수트 소매원형을 제안하는 과정을 거쳤다. 외관평가에서 T3>T4>T2>T1 순서로 우수하게 평가되었으며, 동작적합성 평가에서는 T1>T4>T2>T3의 순으로 평가되어, 외관적으로는 여유분이 적어 당겨 보이는 이유로 점수가 낮아도 쾌적성에서는 오히려 죄어주는 것이 안정감이 있다고 분석되었다. 따라서 외관과 쾌적감의 균형을 고려하였을 때 최종적으로 T4,즉, 소재의 신축성에 따른 패턴축소율(전체소매길이 : 1.0RR, 소매산높이 : 0.7RR, 팔꿈치둘레: 0.9RR)이 반영되고, 진동둘레에 제로 이즈량을 부가하였으며, 앞뒤차가 반영된 바디수트 소매 원형 제도방법 이 제안되었다.

낙동강 하구역 사주지형 변동과 부유사(SS) 수송량 산정 - 진우도를 중심으로 - (Topographical Change Monitoring of the Sandbar and Estimation of Suspended Solid Flux in the Nakdong River Estuary - Focused on Jinudo -)

  • 이인철;임성필;윤한삼;김헌태
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제11권2호
    • /
    • pp.70-77
    • /
    • 2008
  • 본 연구에서는 낙동강 하구역의 해난사고 방지대책 마련의 일환으로 사주지형변동 예측을 위한 기초적 연구로서, 진우도를 대상으로 장기간의 지형변동 모니터링과 외해측 정점 St. S1에서 대조기 및 소조기시 해수유동 및 부유사 농도의 현장조사결과로부터 부유사 수송량(SS flux)을 산정하여 진우도의 사주지형변동 특성에 대하여 검토하였다. 진우도의 장기간 지형변동 모니터링을 통해 얻어진 연간 평균지반고 변화량과 퇴적속도는 각각 141 mm, 0.36 mm/day로서 북측을 제외한 모든 방향으로 퇴적현상이 활발한 것으로 나타났다. 그리고 대조기 및 소조기시 St. S1 정점에서 25시간 연속 조류관측 및 SS농도 측정결과를 바탕으로 산정한 동서방향 및 남북방향의 SS flux($SS_{LH}$$SS_{LV}$)를 살펴보면, 대조기시의 $SS_{LH}$는 대체로 전 수심에 걸쳐 평균 28 $kg/m^2/hr$로 동측으로 이동하였으며, $SS_{LV})$는 약 11.1 $kg/m^2/hr$로 북측으로 이동하는 것으로 나타나, $SS_{LH}$$SS_{LV}$에 비해 약 2.5배 수송량이 많은 것으로 나타났다. 또한 소조기시의 $SS_{LH}$$SS_{LV}$는 대조기시와 유사하게 동 북측으로 각각 평균 약 4.8 $kg/m^2/hr$ 및 1.5 $kg/m^2/hr$의 범위로 $SS_{LH}$의 수송량이 $SS_{LV}$에 비해 약 3.2배 크게 산정되었다. 한편 진우도 외해측에서 부유사 수송량은 대조기시가 소조기시보다 약 6배 많았으며 전체적으로 $SS_{LH}$$SS_{LV}$가 저층부근에서 최대값을 나타내어, 창조류시 저층에서의 강한 흐름에 의한 저층 퇴적물의 재부상 과정이 진우도 남측 사주지형의 퇴적변화에 크게 영향을 미치는 것으로 판단된다.

  • PDF

유류오염부지에서 자연저감기법 적용 사례연구: I. 부지특성 조사 (A case study of monitored natural attenuation at the petroleum hydrocarbon contaminated site: I. Site characterization)

  • 윤정기;이민효;이석영;이진용;이강근
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제8권4호
    • /
    • pp.27-35
    • /
    • 2003
  • 연구대상부지는 주로 선캄브리아기의 변성암의 일종인 편마암으로 형성되어 있으며, 토양은 하천에 축적된 비교적 투수성이 높은 매질로 구성된 충적토를 모재로 형성되었다. 지하수위는 지표로부터 평균 3.5m 깊이에서 나타나며. 하류 방향으로 갈수록 깊어지는 경향을 나타내었다. 대상부지의 수리전도도는 자갈이 혼재된 조립질 모래층은 5.0${\times}$$10^{-2}$∼1.85${\times}$$10^{-1}$ cm/sec, 세립질 모래층은 $1.5{\times}$$10^{-3}$ to 7.6${\times}$$10^{-3}$ cm/sec, 복토층은 $10^{-4}$ cm/sec 이하로 나타났다. 연구대상부지의 주오염물질은 Toluene, Ethylbenzene, xylene(이하 TEX)이며, 오염토양층은 1.5 m내외로 깊이별 토양중 TEX의 농도는 추정오염원으로부터 70m떨어진 곳의 질이 2.4∼4.8m에서 가장 높았다. 지하수중 TEX의 농도는 추정오염원의 주변지역에서 가장 높았으며, 조사대상부지의 중앙지역과 남서쪽지역에서도 높게 나타났으며, 이러한 지하수중 TEX의 농도분포는 토양중의 TEX의 농도분포와 상당히 일치하는 경향을 보이고 있다. 연구대상부지에 서식하고 있는 톨루엔 분해 호기성세균의 주종은 Pseudomonas fluorescence, Burkholderia cepacia, Acinetobactor lwoffi로 확인되었다. 지하수 분석결과 전자수용체인 용존산소, 질산염, 황산염 등이 배경지역에 비해 오염지역에서 상당히 낮게 나타났다. 한편, 연구대상부지에서의 계산된 전체 자연저감속도는 0.0017da $y^{-1}$이며, 1차 생분해속도는 0.0008 da $y^{-1}$로 계산되었다.

만경강 유역의 토양과 수도체중 Cd 및 Zn 함량의 변화 (Variation of Cadmium and Zinc Content in Rice and Soil of the Mangyeong River Area)

  • 김성조;백승화;김운성;윤기운;문광현;강경원
    • 한국환경농학회지
    • /
    • 제13권2호
    • /
    • pp.142-150
    • /
    • 1994
  • 수질오염에 따른 Cd 및 Zn의 함량변화 차이를 구명하기 위하여 도시하수 및 공단배출수의 영향을 받는 만경강 유역의 논토양을 중심으로 1982년도와 1990년도에 표토와 심토로 구분하여 채취한 토양시료를 그리고 1990년도의 토양시료 채취지역에서 재배된 수도체 시료중 Cd 및 Zn 함량을 분석하여 그 변화를 분석하였다. 만경강 유역의 토양 중 이들 중금속 분포는 Cd이 0.38-1.17, Zn이 33.8-464.6mg $kg^-$이었다. 년도별 함량변화에서 Cd 함량은 1990년도 토양이 1982년도 보다 낮았고, Zn 함량은 반대로 1982년도 토양이 1990년도 토양 보다 낮았다. Cd의 경우 도시하수 및 공장폐수 배출지로부터 거리별 변화가 분명하지 않았으나, 토양의 유기물함량, 유효규산, CEC, 치환성 $Ca^{++}$ 함량과 유의성 있는 상관관계를 나타내었다. 또한 이 지역의 토양 중 Cd 함량은 1982년도 심토 중 Cd 함량은 토양 중 Zn, Cu 및 Pb 함량과 유의한 상관관계를 나타내었다. Zn의 경우는 거리가 멀 수록 그 함량이 낮아지는 경항이 있었으며, 1982년도 토양 중에서 유기물 함량과 치환성 $Ca^{++}$ 함량과, 그리고 년도에 관계없이 토양 중 Cu와 Pb 함량과 유의성있는 상관관계를 나타내었다. 한편 이 지역의 수도체 부위별 Cd 함량은 현미중 농도에 비해 엽신 중의 농도가 최고 7배 이상이 되었고, Zn의 경우는 엽신과 화서축 중에서 흡수축적량이 높았으며, 토양 중 Zn, Cu, Pb의 존재는 수도체의 화서축 중의 Cd 함량과 또 수도체의 모든 부위별 Zn 함량과 유의성 있는 상관관계를 나타내었다. 만경강유역의 현미 중 Cd의 함량은 0.10-0.90mg $kg^{-1}$이었고, Zn의 함량은 4.2-95.9mg $kg^{-1}$ 범위였다.

  • PDF