• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.257-262
• /
• 2000

The purpose of this study is grasping quality aggregate using Bottom Ash of Industrial Waste Incinerator, and is evaluating possibility of application as construction materials. Cement and Fly ash is used with binder of aggregates using bottom ash. It is tested for basic property and strength of artificial aggregates, and the results are compared with crushed stone and elution tests is done for environmental safety. In the results of tests, it is confirmed that basic property and strength are lowe than crushed stone but the aggregates have possibility of application as artificial lightweight aggregates. When it is manufactured with aggregates, it is sage environmentally because of protecting elution of harmful heavy metals.

• 한국산학기술학회논문지
• /
• 제10권11호
• /
• pp.3246-3252
• /
• 2009

최근 들어 지속적인 폐기물 발생량의 증가와 화석 연료 고갈 문제를 해결하기 위해 폐기물을 이용한 열에너지 회수에 대한 관심이 증가 하고 있다. 에너지 회수를 위한 폐기물 처리공정으로 소각이 가장 많이 이용되고 있으나 소각 시 발생되는 대기오염물질을 처리하기 위한 공정 설계 및 설치비용이 많이 소요된다. 본 연구에서는 화학공정을 모사하는 software인 Aspen plus를 이용하여 실제 산업폐기물 소각로와 배가스처리 공정을 모사해 보았다. 소각공정은 폐기물 연소를 위한 1차 연소와 2차 연소, urea를 이용하여 $NO_x$를 환원시키는 SNCR공정과 연소시 발생하는 에너지 회수를 위한 스팀 생산 공정으로 구성되어 있다. 연소시 발생하는 산성가스(HCl, $SO_2$)를 제거하기 위하여 슬러리 상태의 $Ca(OH)_2$를 주입하였으며 산성가스 중화시 생성되는 부산물과 ash는 bag filter에서 제거하는 것으로 모사 하였다. 모사결과는 실제 산업폐기물 소각로의 배가스 처리 효율과 비교적 잘 일치하였으며 또한 장래 배가스 처리 시스템의 효율을 예측하는데도 이용될 수 있을 것으로 판단된다.

• 한국환경보건학회지
• /
• 제41권1호
• /
• pp.49-60
• /
• 2015

Objectives: Pine needles were used as a passive air sampler (PAS) of atmospheric persistent organic pollutants (POPs). This study was performed to investigate concentrations of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) deposited on pine needles near a waste incinerator and PCDD/Fs source contributions using principal component analysis (PCA). Methods: Two-year-old pine needles were sampled at 11 points with respect to distance and wind direction from the incinerator. PCDD/Fs deposited on pine needles were analyzed with HRGC/HRMS. The source contribution of PCA was calculated with SPSS. Results: The average concentration of PCDD/Fs deposited on pine needle was 0.79 (0.27-1.76) pg TEQ/g dry, PCDDs with 0.24 (0.01-0.95) pg TEQ/g dry and PCDFs with 0.56 (0.27-0.82) pg TEQ/g dry, respectively. The average concentration fraction of PCDDs was 29.7%, that of PCDFs was 70.3%, and PCDFs were more prevalent than PCDDs. The contributions of PCDD/Fs sources were estimated as incineration at 58.3% and automobiles at 28.4%. However, a relation and regulation between PCDD/Fs concentrations deposited on pine needles and distance from incinerator or wind direction was not shown. Conclusion: It was concluded that atmospheric PCDD/Fs concentrations near an industrial complex with a waste incinerator were affected by multiple sources. However, PCDD/Fs concentrations were lower than in other inland cities with the exception of background area.

• 한국환경과학회지
• /
• 제16권11호
• /
• pp.1225-1230
• /
• 2007

The emissions characteristics of particulate matters(PM) according to the types of wastes from industrial waste incinerator of 800 kg/hr treatment capacity were investigated. For this study, the incinerate waste are as follows; waste resin, waste wood, waste urethane, waste gunny, and waste paper. The particulate samples were collected to be emitted in stack and air pollution control(both cyclone and bag filter). In stack, the concentrations of PM were in the range of 2.61 to $26.51 mg/Sm^3$ and the major chemical species were C, Si, Cl, K, Na, Ca in all the wastes. In cyclone fly ash, the mean content of heavy metal were in the order of Fe > Zn > Pb > Cu > Mn > Cr > Ni > Cd > As > Hg and the heavy metal content of waste resin were Zn 34,197.5 mg/kg, Fe 27,587.6 mg/kg, Pb 6,055.8 mg/kg, respectively. In bag filter fly ash, the mean content of heavy metal were in the order of Zn > Pb > Fe > Cu > Mn > Cd > Cr > Ni > As > Hg and the heavy metal content of waste wood were Pb 36,405.2 mg/kg, Fe 15,762.9 mg/kg, Cu 9,989.5 mg/kg, Cd 2,230.1 mg/kg, respectively. Comparing the heavy metal content of both cyclone and bag filter, in cyclone, the Cr, Fe, Ni content were higher than in bag filter and the Cd, Cu, Hg content were lower than in bag filter.

• 공업화학
• /
• 제25권1호
• /
• pp.103-106
• /
• 2014

생활폐기물 소각시설에서 발생하는 바닥재는 높은 염소함량과 불순물 때문에 재활용에 한계가 있다. 하지만 종량제봉투의 도입과 음식물폐기물의 직매립 금지, 생산자책임제도의 도입 등 다양한 제도의 개선을 통해 성상이 변화되고 있다. 최근의 생활폐기물은 수분함량과 염소함량이 낮고 발열량이 높은 특성을 보이는데 이는 음식물폐기물의 분리배출, 폐기물의 전처리를 통한 불연물의 분리, 염소 등이 함유된 PVC 분리 등에 기인한 것으로 볼 수 있다. 본 연구의 목적은 이러한 제도, 특히 음식물폐기물의 분리배출 등의 정책 도입에 따른 생활폐기물 소각시설의 바닥재 성상변화 특성을 분석하고 이를 토대로 바닥재의 재활용 가능성을 평가하는 것이다. 바닥재에 함유된 다양한 성분 중 시멘트 클링커의 주요 성분인 CaO는 2001년 26.7%에서 2006년 34.0%로 증가하였고, 염소성분은 2001년 1.84%에서 2006년 0.00655%로 큰 폭으로 감소하였는데 이는 석탄 화력발전소에서 발생하는 비산재의 특성에 근접하는 것으로서 시멘트 클링커의 원료물질 등 재활용 가능성을 가지게 된 것으로 판단할 수 있다.

• 한국환경보건학회:학술대회논문집
• /
• 한국환경보건학회 2003년도 Challenges and Achievements in Environmental Health
• /
• pp.152-156
• /
• 2003

Air pollution problems due to the emission of pollutants from the various industrial facilities become serious issues and lots of air pollution control processes have been developed. To remove the SO$_2$ and NOx emitted from the solid waste incinerator and coal fired power plants, we studied the Ca-based sorbent which was prepared by waste clam and limestone. The objectives of this study were to develop a clam-based sorbent for removal of SO$_2$ and NOx, and to investigate the physicochemical properties of the waste clam sorbent. In order to determine acid gas removal capacity of sorbent, the batch study on SO$_2$ and NOx removal was performed with the Ca-based sorbent in the fixed bed reactor. Results of the research revealed that clam-based sorbent can be used as the iron-manufacturing industry and chemical adsorbents for the removal of acid gases because the lime content of the waste calm was more than 53.92%. From physicochemical analysis and gas reaction experiments, it could be concluded that clam is good sorbent for the removal of SO$_2$ and NOx in waste incinerator and flue gas desulfurization processes.

• 유기물자원화
• /
• 제21권4호
• /
• pp.44-49
• /
• 2013

한국의 중형 소각시설이 전체 소각로 개수의 약 90% 차지하는 실정에서 중형 소각시설의 다이옥신 저감운전기술을 확립하는 것은 매우 시급하다. 생활폐기물과 성상이 유사한 사업장 일반폐기물을 일 20톤 처리용량의 중형규모 구동화격자 스토커 소각시설에서 운전하면서, 각 공정별로 다이옥신 저감을 위한 최적 운전 인자를 도출하였다. CO튀는 현상의 최소가 다이옥신 배출저감에 운전최선책임이 밝혀졌다.

• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.239-246
• /
• 2014

Incineration is conceptually sound as a waste treatment technology. There is, however, concern over its emissions when it is improperly designed and operated. An electrostatic precipitator is one of the most commonly used devices to control particulate emissions from boilers, incinerators and some other industrial processes. In this work, a modular electrostatic precipitator with sizing of $1m{\times}1m{\times}1m$ was developed for removal of particulate matter from the exhaust gases of a small waste incinerator. Its design was based on a simple wire-and-plate concept. The corona discharge wires were connected to a positive high-voltage pulse generator, while the collection plates were grounded. The high-voltage pulse generator was used to produce the corona discharge field between the individual discharge wire and the collection plate. The particulate-laden exhaust gas flow was directed across the corona discharge field. The charged particles were deflected outward and collected on the plate. The collection efficiency was evaluated as a mass loading ratio between the difference at the inlet and the outlet to the particulate loading at the inlet of the precipitator. The collection efficiency of this modular electrostatic precipitator design was approximately 80 %.

• 한국세라믹학회지
• /
• 제51권2호
• /
• pp.64-71
• /
• 2014

Accelerated carbonation is a technique that can be used as a CCS technology for $CO_2$ sequestration of approximately 5~20% in a stable solid through the precipitation of carbonate. An alkaline inorganic waste material such as ash, slag, and cement paste are generated from incinerators, accelerated carbonation offers the advantage of lower transport and processing costs at the same generation location of waste and $CO_2$. In this study, we evaluated an amount of $CO_2$ sequestration in various types of inorganic alkaline waste processed by means of accelerated carbonation. A quantitative evaluation of $CO_2$ real sequestration based on a TG/DTA analysis, the maximum 118.88 $g/kg_{-waste}$ of $CO_2$ in paper sludge fly ash, the maximum 134.46 $g/kg_{-waste}$ of $CO_2$ in municipal solid waste incinerator bottom ash, the maximum 9.72 $g/kg_{-waste}$ of $CO_2$ in industrial solid waste incinerator fly ash, and the maximum $18.19g/kg_{-waste}$ of $CO_2$ in waste cement paste.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2003년도 추계학술대회 논문집
• /
• pp.165-166
• /
• 2003

국내에서의 PAHs 연구결과 들은 아직도 측정·분석방법의 평가 등에 관한 수준에 머무르고 있으며, 전국적인 PAHs의 배출원 조사와 배출량 추정 등 체계적인 배출상태조사(emission inventory)와 배출특성 등에 관한 조사·연구 사례는 전무한 실정이다. 더욱이 오래 전부터 이 분야에 많은 관심을 가진 나라에서도 이 분야에 대한 연구가 입자상 물질에 흡착되어 있는 PAHs에 국한되고 있는 실정이다. (중략)