• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2008년도 춘계학술발표논문집
• /
• pp.365-368
• /
• 2008

일반적으로 6 시그마 적용사례는 제조분야 중심으로 연구 발표되는 경우가 많고, 판매나 마케팅 분야의 적용사례는 찾기 힘들실정이다. 본 논문에서는 S전자의 전문상가에서 판매되는 노트북의 판매비중을 높이기 위해 6 시그마를 적용하여 노트북의 판매비중을 높이기 위해 프로젝트를 진행하였다.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2005년도 춘계학술대회
• /
• pp.137-146
• /
• 2005

This paper describes web-based construction project management and project document information flows within the construction industry. This study is to consider the practice for process improvement including reengineering and the engineering project practice. CCPM based on TOC is introduced.

• 한국산학기술학회논문지
• /
• 제22권1호
• /
• pp.171-177
• /
• 2021

최근 우리나라 건설업계는 건설기술 인력 부족, 건설노동인력 고령화, 주 52시간 근무 등 다양한 건설환경 대응 방안으로 공업화공법 활성화에 대한 요구가 증가하고 있다. 공업화주택 인정제도는 공업화주택의 품질인정과 품질 향상 유도를 위하여 1992년에 도입되었으나 현재 6개 업체만 인정을 받았고, 인정 받은 공업화주택이 건설된 실적도 전무한 상황이다. 현재 우리나라 공업화주택 인정제도는 크게 인정 및 인정 취소기준, 공업화주택 건설촉진 기준으로 구성되어 있다. 이에 본 연구에서는 공업화주택인정제도의 관련 규정을 심층분석하여, 각 규정에 따른 문제점을 도출하고, 이를 기반으로 공업화주택 인정제도 활성화를 위한 제도 개선방향을 도출하였다. 구체적인 공업화인정제도 방안으로는 현행 공업화 주택 인정 범위를 준주택까지 확대하는 방안, 공업화 주택의 성능 및 생산기준 개정, 공업화주택 활성화 지원을 위한 건축기준 완화 및 금융지원 등을 제안하였다. 향후 공업화주택 인정제도와 별도로 국내 공업화 건축시장이 활성화되지 못하는 주요 원인 중 하나인 경제성 문제를 해결하기 위해 공업화공법의 사회·경제·환경·기술적 파급효과에 대한 체계적 분석과 가시화를 통해 건설시장 패러다임을 전환을 적극적으로 유도할 필요가 있다.

• 한국미생물·생명공학회지
• /
• 제38권3호
• /
• pp.235-243
• /
• 2010

For decades, traditional mutation breeding technologies using spontaneous mutation, chemicals, or conventional radiation sources have contributed greatly to the improvement of crops and microorganisms of agricultural and industrial importance. However, new mutagens that can generate more diverse mutation spectra with minimal damage to the original organism are always in need. In this regard, ion beam irradiation, including proton-, helium-, and heavier-charged particle irradiation, is considered to be superior to traditional radiation mutagenesis. In particular, it has been suggested that ion beams predominantly produce strand breaks that often lead to mutations, which is not a situation frequently observed in mutagenesis induced by gamma-ray exposure. In this review, we briefly describe the general principles and history of particle accelerators, and then introduce their successful application in ion beam technology for the improvement of crops and microbes. In particular, a 100-MeV proton beam accelerator currently under construction by the Proton Engineering Frontier Project (PEFP) is discussed. The PEFP accelerator will hopefully prompt the utilization of ion beam technology for strain improvement, as well as for use in nuclear physics, medical science, biology, space technology, radiation technology and basic sciences.

• 산업경영시스템학회지
• /
• 제43권3호
• /
• pp.204-215
• /
• 2020

Efforts on the continued increase of local government's fiscal spending related to improving the residential environment are desirable to counter the declining phenomenon of urban decline. At the same time, however, it is also important to know how to operate limited finances more efficiently to improve the residential environment. This study aims to contribute to the rational allocation of fiscal expenditure and the creation of productive results for the improvement of the settlement environment. To this end, this study analyzed the efficiency of financial expenditure related to the improvement of the residential environment in 225 local governments nationwide. The relationship between financial expenditure and residential environmental performance was also measured and the CCR, BCC and SBM models were used to measure efficiency. The analysis showed that most local governments need to scale back their fiscal spending related to improving the government environment. In addition, it was required to prepare feasible spending plans by bench-marking the processes of residential environment improvement projects in areas such as Haman-gun, Jongno-gu, Seoul, and Seocho-gu, which are considered to be under efficient operation.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2004년도 추계학술대회
• /
• pp.131-141
• /
• 2004

This study deals with the procedure of safety improvement, productivity increase, and tact-time reduction through setting up the system about preventive maintenance. Actually, it is hard to establish and carry out preventive maintenance, even though we recognize the importance of the system concerning time, cost, labor, and so forth. In this study in the viewpoint of cost we are for achieving maximum efficiency by change and reduction of planning process adapted to the special work group. At first we briefly will mention the kind, the necessity, and the concept of preventive maintenance, and then divide the equipment used in the assembly line into the two whether it is necessary or not by way of estimating the breakdown loss, comparing with general establishment of preventive maintenance and modifying it to the case. At the second step we will establish the operation system of plan management related to production and quality in the special case. Check period and category will be set by dividing the assembly equipment into LCL and Focus in the third step. The forth step will contain the operation procedure in detail. And then we must make check and repair record periodically. Finally, on the basis of the record the selection of checking of significance will be conducted. This results in safety improvement, tact time reduction, and productivity improvement.

• 산업경영시스템학회지
• /
• 제33권1호
• /
• pp.59-70
• /
• 2010

This paper reorganized five service qualities dimensions of ski-resorts, then derived the improvement priority order of the service quality through a satisfaction measure considering the importance. There're more competitive situations to guarantee customers using the skies and snowboards is a major sports in winter season. In these competitive environments, this paper's going to propose a predominant-competitive strategies for improving the service quality of ski-resorts. This study measured the satisfaction considering the importance of service quality target on customers has an experience ski resort service quality to improve ski resort service quality. This study using Performance Model decide a priority order about a particular item improvement, then is going to present a guideline that can improve the service quality more exactly. As a result of the study the factors that is important to the customer were prime physical factor, access, assistance physical factor, staff service and assistant service, an improvement priority order were accommodation and eating-drinking facilities, waiting time of a slope and lift/gondola, entertainment/shopping facilities in the resorts, equipment rental and lift fare.

• 동아시아경상학회지
• /
• 제5권4호
• /
• pp.67-74
• /
• 2017

Purpose - The main purpose of this study is to contribute to the elevation of producers' production at various levels by proposing the creation of producer improvement indexes that can be used for the successful 6th industrialization of Korean agribusiness based on the Kano model and has synergistic effects on the development of the 6th industry through scientific researches. Research design, data, methodology - To this end, this study derived better and worse index from the same estimation of Timko's customer satisfaction index as in the evaluation charts used in previous researches and theoretical studies on the Kano model. Results - In this paper, we suggested that the formula for producing PSCI Index be applied to yield the producer improvement index in the 6th industry, in order to draw SIPPI. Conclusions - If this suggestion is realized, then a lot of researchers will be supported to more systematically study producers, and it is expected to contribute to the development of the 1th industry, a basis for the successful 6th industry. Moreover, the central government and municipalities are expected to provide a variety of clues for applying various policies for successful agribusiness.

• International Journal of Quality Innovation
• /
• 제8권1호
• /
• pp.137-153
• /
• 2007

Failure mode and effects analysis (FMEA) is a preventive technique in reliability management field. The successful implementation of FMEA technique can avoid or reduce the probability of system failure and achieve good product quality. The FMEA technique had applied in vest scopes which include aerospace, automatic, electronic, mechanic and service industry. The marking process is one of the back ends testing process that is the final process in semiconductor process. The marking process failure can cause bad final product quality and return although is not a primary process. So, how to improve the quality of marking process is one of important production job for semiconductor testing factory. This research firstly implements FMEA technique in laser marking process improvement on semiconductor testing factory and finds out which subsystem has priority failure risk. Secondly, a CCD position solution for priority failure risk subsystem is provided and evaluated. According analysis result, FMEA and CCD position implementation solution for laser marking process improvement can increase yield rate and reduce production cost. Implementation method of this research can provide semiconductor testing factory for reference in laser marking process improvement.

• 한국해양공학회지
• /
• 제22권2호
• /
• pp.50-57
• /
• 2008

The effect of weld improvement on the corroded fatigue life of welded structures was investigated. Toe grinding, TIG dressing and weld profiling were used as the geometric improvement methods. Fatigue tests under the corroded condition in artificial seawater were carried out to investigate the corrosion fatigue behavior of API 2W Gr.50T steel plate produced by POSCO. The test results in weld improved conditions were compared with those in as-welded condition. The test results were also compared with the design curves in UK DEn Class F. Corroded fatigue life of weld improved specimens was longer than that of as-welded specimen. Especially, the corroded fatigue life exceeded the mean SN curve in air of UK DEn Class F.