• Journal of Industrial Convergence
• /
• v.17 no.2
• /
• pp.29-34
• /
• 2019

The purpose of this study is to analyze the achievements of employment support by the government support specialization project. The data used in this study are based on the comparison of 5 - year employment support field and the operation results of the program until 2014-2018. The results of the study are as follows. First, the overall employment rate of the university has been continuously increased. Especially, the employment rate of the specialization department has been higher than the employment rate of the non - specialization department. Second, as a result of the analysis of the employment capacity strengthening index and the learning capacity strengthening index, it showed a steady increase in each year and contributed to the cultivation of customized talents required by the local society and the national industry. Third, as a result of analyzing the satisfaction of students who are business users, it was confirmed that the business reflecting the demands of the consumers was realized. Fourth, the continuous improvement of the business and the reflux have made the infrastructure of the employment support project more advanced and the system of supporting employment of the university systematically established. In conclusion, the result of the employment support project according to the specialization program showed excellent results and it is necessary to complement theses results when establishing related business plan in the future.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.2 no.1
• /
• pp.20-28
• /
• 1977

The shipping business which consistutes main stream of foreign trades in the world desires more larger and higher speed ships to convey a large amount of cargo at a time rapidly and safely. They also want to introduce new techniques into transportation system so to meet the rapid growing demand of maritime mobile communications with the improvement of efficiency of radio apparatus and reduction of the hard labors of radio operators mechanization and modernization of radio apparatus is necessary. Now HF band is used mainly for communications between maritime mobile stations and coast stations but the quality of received signal is not so good and the coverage is not sufficient by the condition of propagation of waves. There is also limitation of channel capacity in HF band. So to cope with or improve of these defects and meet the demands of modern maritime communication it is essential to introduce maritime satellite communication system in this field. By using the maritime satellite we can establish high quality communication circuits as maritime Telex, Faximile, high speed data transmission line and can expand coverages. Therefore industrial rationalization of marine transportation is possible with the reduction of painful labors of radio operators by improving safety and promoting of efficiency of movement of ships and freights. Obviously it is prospected that the introduction of maritime satellite communication system will bring a rapid promotion of its usuage in maritime mobile communication field and also anticipated that maritime satellite communication system will be a main current in maritime mobile communication field over the world in the near future with moderated cost of transmission links as in the case of INTELSAT in the past 10 years after its first launching.

• Advances in environmental research
• /
• v.3 no.1
• /
• pp.45-69
• /
• 2014

The groundwater has been a major source of water supply throughout the ages. Around 50% of the rural as well as urban population in the developing countries like India depends on groundwater for drinking. The groundwater is also an important source in the agriculture and industrial sector. In many parts of the world, groundwater resources are under increasing threat from growing demands, wasteful use and contamination. A good planning and management practices are needed to face this challenge. A key to the management of groundwater is the ability to model the movement of fluids and contaminants in the subsurface environment. It is obvious that the contaminant source activities cannot be completely eliminated and perhaps our water bodies will continue to serve as receptors of vast quantities of waste. In such a scenario, the goal of water quality protection efforts must necessarily be the control and management of these sources to ensure that released pollutants will be sufficiently attenuated within the region of interest and the quality of water at points of withdrawal is not impaired. In order to understand the behaviour of contaminant transport through different types of media, several researchers are carrying out experimental investigations through laboratory and field studies. Many of them are working on the analytical and numerical studies to simulate the movement of contaminants in soil and groundwater of the contaminant transport. With the advent of high power computers especially, a numerical modelling has gained popularity and is indeed of particular relevance in this regard. This paper provides the state of the art of contaminant transport and reviews the allied research works carried out through experimental investigation or using the analytical solution and numerical method. The review involves the investigation in respect of both, saturated and unsaturated, porous media.

• Structural Engineering and Mechanics
• /
• v.18 no.5
• /
• pp.645-669
• /
• 2004

In seismic analysis of moment-resisting frames, beam-column connections are often modeled with rigid joint zones. However, it has been demonstrated that, in ductile reinforced concrete (RC) moment-resisting frames designed based on current codes (to say nothing of older non-ductile frames), the joint zones are in fact not rigid, but rather undergo significant shear deformations that contribute greatly to global drift. Therefore, the "rigid joint" assumption may result in misinterpretation of the global performance characteristics of frames and could consequently lead to miscalculation of strength and ductility demands on constituent frame members. The primary objective of this paper is to propose a rational method for estimating the hysteretic joint shear behavior of RC connections and for incorporating this behavior into frame analysis. The authors tested four RC edge beam-column-slab connection subassemblies subjected to earthquake-type lateral loading; hysteretic joint shear behavior is investigated based on these tests and other laboratory tests reported in the literature. An analytical scheme employing the modified compression field theory (MCFT) is developed to approximate joint shear stress vs. joint shear strain response. A connection model capable of explicitly considering hysteretic joint shear behavior is then formulated for nonlinear structural analysis. In the model, a joint is represented by rigid elements located along the joint edges and nonlinear rotational springs embedded in one of the four hinges linking adjacent rigid elements. The connection model is able to well represent the experimental hysteretic joint shear behavior and overall load-displacement response of connection subassemblies.

• Journal of Soil and Groundwater Environment
• /
• v.15 no.2
• /
• pp.47-54
• /
• 2010

Although the demands for the dredging work have been increasing due to social and industrial reasons including national plan for restoration of four major rivers, environmental standards or management guidelines for the dredged river sediment are limited. The suggested environmental standard for the beneficial use of dredged river sediment consists of two levels, recyclable and concern, and includes eight contaminants such as metals and organic contaminants. The systematic approach to remediate dredged river sediment is also suggested. The system consists of both washing and stabilization processes with continuous multi particle separation. In the early stage, the sediments are separated into two particle sizes. The coarse-grained sediment over 0.075 mm, generally decontaminated with less trouble, follows normal washing steps and is sent for recycling. The fine-grained sediments under 0.075 mm are separated again at 0.025 mm. The particles bigger than this second separation point are treated in two ways, advanced washing for highly contaminated sediments and stabilization for less. The lab test results show that birnessite and apatite are most effective stabilizing agents among tested for Cd and Pb. The most fine residues, down-sized by continuous particle separation, are finally sent for disposal. The system is tested for metals in this study, but is expected to be effective for organic contaminants included in the environmental standard, such as PAH and PCE. The feasibility test on the field site will be followed.

• Applied Chemistry for Engineering
• /
• v.21 no.5
• /
• pp.564-569
• /
• 2010

Highly anti-reflective optical property has been focussed in the field of thin film and display because of increasing demands to the high transparency and clearness of optical component. In this study, to obtain anti-reflective property, the formation of aluminium oxide with nanoscaled flowerlike frame structure was introduced as oxide material monolayer on the substrate by hydrothermal synthesis through sol-gel method. The properties of coating layer were measured by the means of UV-Vis spectroscopy, FT-IR spectroscopy, XRD, and FE-SEM. The morphology of coating layer in alumina-sol coated samples was controlled by hydrothermal temperature and time with aid of ultrasound. It was found that high transparency and anti-reflective optical properties were obtained the formation of flowerlike nanoframe structure.

• Journal of Engineering Education Research
• /
• v.15 no.2
• /
• pp.58-66
• /
• 2012

This paper deals with the development of mechatronics fusion curriculum in Handong Global University. The execution of the program, which has been more than ten years long, is presented in the paper. The research indicates that changing the double major program from mechanical and metal engineering to mechanical and electronics control engineering resulted in dramatically increased number of students in the program and increased number of employment opportunities for graduating students. Percentage of satisfaction on the double major program was the highest from students enrolled among ten double major programs in the school. Overall grade average was significantly improved in junior year students compared to sophomore year students indicating the students became more engaged in their studies after having been trained in the program for one year. It is believed that multiple hands-on experiments and class projects conducted throughout the course assisted the development of the new curriculum. The study shows that the mechatronics fusion program is promising since it is relevant to the need of current age of industrial field that demands engineers with multidisciplinary capability.

• Journal of the Semiconductor & Display Technology
• /
• v.23 no.2
• /
• pp.1-5
• /
• 2024

In the electronics industry, a lot of research and development is being conducted on electronic component supply, component alignment and insertion, and automation of soldering on the back side of the PCB for automatic PCB assembly. Additionally, as the use of electronic components increases in the automotive component field, there is a growing need to automate the alignment and insertion of components with leads such as transistors, coils, and fuses on PCB. In response to these demands, the types of PCB and parts used have been more various, and as this industrial trend, the quantity and placement of automation equipment that supplies, aligns, inserts, and solders components has become important in PCB manufacturing plants. It is also necessary to reduce the pre-setting time before using each automation equipment. In this study, we propose a method in which a vision system recognizes the type of component and simultaneously corrects alignment errors during the process of aligning and inserting various types of electronic components. The proposed method is effective in manufacturing various types of PCBs by minimizing the amount of automatic equipment inserted after alignment with the component supply device and omitting the preset process depending on the type of component supplied. Also the advantage of the proposed method is that the structure of the existing automatic insertion machine can be easily modified and utilized without major changes.

• Journal of Korean Library and Information Science Society
• /
• v.51 no.4
• /
• pp.59-81
• /
• 2020

The purpose of this study is to compare and analyze the trend of reading research in Korea's LIS Fields in the past 20 years, divided into the 2000s and 2010s, by establishing a keyword network. To achieve this purpose, keywords were extracted from 489 related articles in the four major journals in the LIS field sourced from the Korean Journal Citation Index (KCI) and then analyzed using NetMiner4. The results of the study were as follows: First, in the case of the 2000s, 'Public Library', 'Bibliotherapy', 'Reading Education', and 'School Library' showed high values of Frequency Analysis, Degree Centrality, and Betweenness Centrality. In the 2010s, 'Reading Education', 'School Library', 'Children', 'Adolescents', and 'Public Library' showed high values of the aforementioned measures. Second, in the 2000s, the establishment of library infrastructure for reading and reading education, the improvement of policies and systems, and reading research through the reading movement were actively conducted. In the 2010s, based on the work and research done in the 2000s, customized user reading studies and various detailed reading research were conducted. Third, to meet the demands of the times for the restoration of humanity with creativity and imagination in the Fourth Industrial Revolution, reading research and professional in-depth research should be conducted in various environments beyond public and school libraries and interdisciplinary research and active joint research between the field and academia are needed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.12
• /
• pp.3931-3942
• /
• 2009

This study as a descriptive survey was to investigate recognition and attitudes on ethical issues for DNR of 119 rescue party who are working on the field, and to develop an objective framework which helps rescue team to manage DNR patients. Data were collected from the structured questionnaire, and subject were 226 rescue party in Jeollabuk-do area in Korea. Study was practiced from May 6 through June 20, 2009, and the data were analyzed by frequency, percentage, $x^2$-test, crosstabs using SPSS Win 12.0. The results indicated that ethical attitudes on subjects' factors(sex, age, religion, marital status, clinical working career, current working area, current position, educational experiences for ethics and values, DNR education places, DNR implication experience, and DNR consulting demands) were statistically significant. Therefore, following researches will be necessary in order to consider measures about DNR based on this study.