• 품질경영학회지
• /
• 제49권1호
• /
• pp.47-60
• /
• 2021

Purpose: This study proposes methods and procedures for evaluating imaging security systems quality of cabinet x-ray screening system to enhance performance certification technology. Also, conducted a comparative analysis of the literature of test-kit for imaging security quality evaluation. Methods: Comparative analysis of the test-kits and related documents for image quality assessment of cabinet x-ray screening equipment. This allows assessment items were selected and the methods for each assessment item were proposed. In addition, the configuration method of the assessment team was established by applying the technology readiness assessment(TRA). Results: Four of the assessment items were selected when estimate image quality by a comparative analysis of literature. For each assessment item, the evaluation method and minimum level of availability were determined. Finally, this paper proposes an imaging quality assessment of cabinet X-ray imaging security systems. Conclusion: Development of imaging security systems evaluation procedures for cabinet X-ray screening systems can be help improve performance certification of aviation security equipment.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.50-56
• /
• 2021

An accurate evaluation of three-dimensional (3D) Time-Domain Green Function (TDGF) in infinite water depth is essential for ship's hydrodynamic analysis. Various numerical algorithms based on the TDGF properties are considered, including the ascending series expansion at small time parameter, the asymptotic expansion at large time parameter and the Taylor series expansion combines with ordinary differential equation for the time domain analysis. An efficient method (referred as "Present Method") for a better accuracy evaluation of TDGF has been proposed. The numerical results generated from precise integration method and analytical solution of Shan et al. (2019) revealed that the "Present method" provides a better solution in the computational domain. The comparison of the heave hydrodynamic coefficients in solving the radiation problem of a hemisphere at zero speed between the "Present method" and the analytical solutions proposed by Hulme (1982) showed that the difference of result is small, less than 3%.

• 기술혁신연구
• /
• 제8권1호
• /
• pp.73-94
• /
• 2000

The main objective of this research is to examine the spillover effects of technological knowledge from IT industry to other industrial sectors and, based on empirical findings, to draw policy implications and suggest policy directions. To this end, we divide IT industry into IT equipment and IT service, assuming that these two sub-sectors are considerably different each other in terms of technology knowledge flow. Other industries are classified into 17 different sectors based on the KSIC of 1990. As the proxy measure of technological knowledge, the notion of R&D stock is employed. The Input/output(I/O) Table is used to define the inter-industrial flow pattern and to draw the knowledge flow matrix. As the research methodology, cost function model is employed to gauge the spillover effects of technological knowledge of IT industry. Based on the results of analysis, it is found that the economic impact of technology diffusion also exhibits a different pattern between IT equipment and IT service. The diffusion of IT equipment tends to show labor-substitution effect whereas IT service displays labor-creation effect. This fact should be considered in devising industry, education, and labor policy. The expectations from this research are as follows. First, the sectoral pattern, difference between IT equipment and service in particular, identified from this research may shed light on the sector-specific policy direction. It is emphasized that a sector-specific approach, rather than an aggregate approach, is relevant for formulating IT policy. Second, it is expected that the importance of technology diffusion programs and policy measures are recognized among policy makers in IT industry.

• 한국위성정보통신학회논문지
• /
• 제6권1호
• /
• pp.63-67
• /
• 2011

본 논문은 MCL(Minimum Coupling Loss)와 MC(Monte-Carlo) 방법을 이용하여 같은 주파수를 사용하는 ISM(Industrial Scientific Medical) 기기와 무선랜이 공간적으로 인접하여 사용될 경우의 간섭 영향 분석을 통해 ISM 기기로부터 무선랜을 보호하기 위한 보호 거리를 제시하였다. CISPR(International Special Committee on Radio Interference)에서 규정한 ISM 기기의 기준치를 간섭 파워로 설정하여 ISM 기기로부터 무선랜을 보호하기 위한 보호 거리를 산출하였다. 그 결과 최악의 상황을 고려한 MCL 분석시 105 m의 보호 거리와 통계적 간섭 확률을 바탕으로 한 MC 분석시 17 m의 보호 거리가 각각 산출되었다.

• 한국산학기술학회논문지
• /
• 제13권4호
• /
• pp.1511-1517
• /
• 2012

진공유리 배기공정을 위해 진공챔버나 진공튜브를 이용하는데 챔버 혹은 튜브 내부 전체를 진공으로 만들기 위한 시간과 경비가 과도하게 요구된다. 이러한 문제점을 해결하기 위해 상압에서 진공배기 및 초음파 접합이 동시에 가능한 복합기를 개발하고자 하였는데, 이 경우 진동자인 피에조 온도가 과도하게 상승하여 복합기의 냉각을 최적화할 필요성이 대두되었다. 따라서, 본 연구에서는 수치해석 및 실험을 통해 자연대류 및 강제대류 냉각방식의 효과를 규명하였고 이를 통해 진공 배기 및 초음파 접합 복합기의 냉각 성능을 최적화하였다.

• 한국산학기술학회논문지
• /
• 제13권5호
• /
• pp.2015-2022
• /
• 2012

본 논문은 항공전자장비의 구조해석을 통한 하우징과 인쇄회로기판의 해석과 설계에 관한 것으로 대기자료 컴퓨터 개발 사례를 통한 연구결과이다. 항공기에 장착되는 전자장비는 전기적인 특성 외에도 운용환경에 따른 구조 설계가 매우 중요하고 설계 단계에서부터 해석을 통한 입증이 되어야 한다. 본 연구에서는 장착되는 항공 장비의 응력과 진동 요구도를 분석하여 해석 결과를 통하여 설계에 적용하고 요구도에 대해서 입증하는 방법에 대한 것이다. 구조 해석은 상용 소프트웨어를 사용하였으며 하우징의 내부 리브 설계에 대한 적합성을 확인하고 인쇄회로 기판의 변위를 계산하여 전자 부품 배치에 활용하는 방법에 대해서 제시하였다.

• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 2002년도 추계공동학술대회
• /
• pp.199-204
• /
• 2002

보전에 중점을 둔 신뢰성(RCM)은 1960년대 후반 상업용 항공기산업을 위해 개발되었고, 현재는 항공기 이외의 여러 장치에도 적용되고 있다. RCM은 예방보전계획을 수립하기 위한 방법으로 예방보전계획은 장치와 구조물의 안전성과 가동성 수준을 효율적이고 효과적으로 성취하게 한다. RCM은 장치와 구조물에 적용가능하면서 효율적인 예방보전요구를 확인하기 위해 결정논리나무를 사용한다. 결정논리를 통하여 보전작업의 실행 필요성에 대하여 최종적으로 판단한다. 본 연구에서는 IEC 60300-3-11을 중심으로 기기나 장치에 대한 RCM분석방법 및 운용방법에 대한 지침을 제공하고자 한다.

• Nuclear Engineering and Technology
• /
• 제50권3호
• /
• pp.478-487
• /
• 2018

Pyroprocessing technology has been regarded as a promising solution for recycling spent fuel in nuclear power plants. The Korea Atomic Energy Research Institute has been studying the current status of equipment and facilities for pyroprocessing and found that existing facilities are manually operated; therefore, their applications have been limited to laboratory scale because of low productivity and safety concerns. To extend the pyroprocessing technology to a commercial scale, the facility, including all the processing equipment and the material-handling devices, should be enhanced in view of automation. In an automated pyroprocessing facility, a supervised control system is needed to handle and manage material flow and associated operations. This article provides a preliminary design of the supervising system for pyroprocessing. In particular, a manufacturing execution system intended for an automated pyroprocessing facility, named Pyroprocessing Execution System, is proposed, by which the overall production process is automated via systematic collaboration with a planning system and a control system. Moreover, a simulation-based prototype system is presented to illustrate the operability of the proposed Pyroprocessing Execution System, and a simulation study to demonstrate the interoperability of the material-handling equipment with processing equipment is also provided.

• 반도체디스플레이기술학회지
• /
• 제21권4호
• /
• pp.168-173
• /
• 2022

As the function of a product is advanced and the process is refined, the yield in the fine manufacturing process becomes an important variable that determines the cost and quality of the product. Since a fine manufacturing process generally produces a product through many steps, it is difficult to find which process or equipment has a defect, and thus it is practically difficult to ensure a high yield. This paper presents the system architecture of how to build a smart manufacturing system to analyze the big data of the manufacturing plant, and the equipment factor analysis methodology to increase the yield of products in the smart manufacturing system. In order to improve the yield of the product, it is necessary to analyze the defect factor that causes the low yield among the numerous factors of the equipment, and find and manage the equipment factor that affects the defect factor. This study analyzed the key factors of abnormal equipment that affect the yield of products in the manufacturing process using the data mining technique. Eventually, a methodology for finding key factors of abnormal equipment that directly affect the yield of products in smart manufacturing systems is presented. The methodology presented in this study was applied to the actual manufacturing plant to confirm the effect of key factors of important facilities on yield.

• International journal of advanced smart convergence
• /
• 제6권2호
• /
• pp.1-8
• /
• 2017

Recently, the development of the information communication industry has made many changes in the industrial acoustic industry. Especially, it has a great influence on the change of system and equipment of acoustic system. Analog equipment is changing to digital equipment, and integrated control equipment makes it easier to operate and manage the sound system. However, the integrated control system currently on the market is only controllable for some devices. In this paper, we propose a new AoIP - based system configuration method, which enables the operation status monitoring, unmanned operation and self - diagnosis of equipment. As a result of the study, it is confirmed that the proposed system can be operated, monitored, and self - diagnosed at remote sites. It is expected that an AoIP- based sound system will be the industry standard in the future.