• Magazine of the Korean Society of Agricultural Engineers
• /
• v.17 no.4
• /
• pp.3943-3955
• /
• 1975

The purposes of this study are to evaluate the utilization characteristics of electrical power consumption, to grasp the present trends in the use of electrical equipments, to estimate the demand factor and load factor being held, and to evaluate the efficiency of electical uses for the recently electrified farms cultivating paddy rice. For the purposes, 109 sample farms located in eleven villiages electrified in six different years from 1968 to 1973, were chosen at random and investigated on 35 items concerning to electrical uses and wiring systems. The survey was carried out in 1975, in the vinicity of Suweon city. The results are summarized as follows: i) The average annual power consumption on sample farms is considered to be low, being 242.9 Kwh. in 1974, and varied according to the different electrified year and size of cultivated land, respectively. It has significant positive correlation to the area of farm, too. ii) Between the number of year of electrical uses and the power consumption, there is very significant positive correlation, which could be expressed as Y=43.041+16.108 X, where X represents the number of years of electrical uses. The annual increment of power consumption is much greater at the beginning of the electrification than that at the later years, its average being approximately 20 percent. However, it is recommended that any estimation of long-term increments should be carefully investigated. iii) The monthly power consumption varies considerably throughout a year, in which the heaviest farm load occurs in November. Observing the seasonal variation of consumption, the winter-time is the heaviest season while the summer is the lowest. The result implies house lighting is chief contribution to the present electrical consumption on the farms. Comparing the variation of monthly consumption ratios between the sample farms and industries, the electrical uses on the farms are independant of the industrial uses, and further, the agricultural uses are of inverse pattern to the farms from the results that there is negative correlationship between them, iv) The number of electrical equipments used on the farms are occupied chiefly by lighting sources. Next to the lighting sources, household appliances of small quantity and some motors are used. The mean electrical quantity is about 1, 127.4 watt, which corresponds to about 37.6 per cent to the contracted quantity. The composition of quantity is chiefly occupied by the electrical motor of about 1.5 hp., single-phased. The number of the annual utilization hours of each equipment is tabulated in Table IV-5. In contradiction to the high utilization of lighting sources and small household appliances, the motor is poorly used for approximately 22 hours in a year. v) More than 55 per cent of farms want to purchase new electrical equipments such as small household appliances and electrical motors in their number. The impulse of purchasing such items is stimulated by the contacts to the mass media and their knowledge on such equipments. Consequently, the increase of electrical uses could be prompted by such trials as education and demonstration. vi) The demand and load factors on the farms vary considerably according to the greater variation of the power consumption, daily or monthly. The daily demand factor is 22.4 per cent and load factor 18.6 per cent, while the annual demand factor is 1.3 per cent and load factor 70 per cent approximately. Therefore, the low efficiency of construction cost requires re-evaluation of the present contracted quantity of 3 Kw. or increase of electrical uses. vii) The electrical energy on the farms devoted chiefly to lighten the farm residences does not contribute to the farm incomes. Consequently, the cost of electrical consumption presses considerably upon the farm economy. Therefore, there is great need to build up the electrical uses on the farms through the development of new works and techinques to utilize any electrical equipments on the production of farm products. Further more, such the development should be related to increase the actual income of the farm consumers.

• Korean Security Journal
• /
• no.59
• /
• pp.37-69
• /
• 2019

According to viewpoints of researchers and stakeholders, various opinions can be suggested on self-governing police system. Therefore, success of Korean self-governing police system will be defending on how to balance among conflicting values such as Empowerment, Political neutrality, Financial issues, Comprehensive competence in maintaining public safety. Before the launching of self-governing police system nation-wide, the experience of Jeju provincial police will be valuable model case. In specific, enlargement of work scope of self-governing police in Jeju province which has been introduced since last year will be a useful reference. There is more pessimism about self-governing police of Jeju province so far. However, this perspective is mostly based on the issue regarding hardwares such as manpower, equipment, law and organization. Issues regarding softwares such as organizational culture, operation system and work process need more attention to evaluate self-governing police system properly. To mark the first year after enlargement of work scope of Jeju police, this study demonstrate the overall result and implications of self-governing police of Jeju province based on documents, statistics, reports and media reports. In result, several preconditions are needed to implement the self-governing police system nation-wide successfully. 1. Strengthen the link between local government and local police 2. Establish the foundation for collaboration of state and local police 3. Enhance the aspect of citizen autonomy in local level 4. Reinforcing the capability of handling situation of state and local police 5. Invigorating the inter-organizational working group to operate self-governing police system effectively. The self-governing police system is unclosed topic to discuss. After this study, in-depth studies should be followed with more resources. Particularly, additional perspective including redundancy and equity need to be considered regarding self-governing police. By getting with the changes of macroscopic trends - lowbirth and aging, the fourth industrial revolution and possible reunification of north and south Koreas - these studies should suggest the long-term blueprint of self-governing police system of Korea.

• Journal of the Korean Geographical Society
• /
• v.28 no.3
• /
• pp.247-267
• /
• 1993

According to developing international economy since the World War II, the increase and competition of the national business is so empha-sized tht both the interest and the necessity about marine transportation playing the impor-thant role of international transportation are increased. Today, the container transportation, as called the innovation of marine transport has been prevailed since the 1970's. The purpose of this paper is to grasp the spatial structure of the hinterlands and forelands, its object is export container cargo at Pusan Export Port, as known for the transportation node of modern containerlization. In this study, for the purpose of grasping the relation between hinterlands and forelands of Korean export container cargo, first, I researched the transition of carloading about container cargo, the bistribution channel of cargo, the change of the items of container and the carlo-adings about transport route, secondly, I used the cluster analysis so as to group hinterlands according to the items of goods and forelands. The object of the analysis is container cargo of Choyang Line, Hanjin Shipping and Hyundai Merchant Marine of National Frag Carriers. The source materials used in this study are Trucking Data of Hanjin Co., Container Ren-tal Data of Samik Transport Co. and Transpor-ting Present Condition Tables of Hyundai Mer-chant Marine. 1. There are two kinds of the transport classi-fied by its form: FCL and LCL. In Pusan Con-tainer Export, a lot of textile goods, clothings and furniture, compound, electric goods, and so on are dealed with but the rate of occupation of the transport is getting lower while that of occupation of equipment, papers and agricultu-ral, mineral and livestock industry higher. 2. In 1990, the transports of container cargo in Korea consist of 7 services and round-the world lines. We can list North America lines, East-South Asian lines, Japan lines and Inter European lines, in order of the quantity of tran-sport form the largest to the smaller. We can have another list that Japan lines, North Ame-rica lines and East-South lines in order of the rate participation of national flag carriers, be-cacuse Korean foreign trade lay disproportionate emphasis on East-South Asian lines. Japan lines among them is the biggest import-export market. Since the rationlization policy of marine tran-sport in 1984, each of national flag carriers have its own lines. Hanjin Shipping predominates over North America lines, Choyang Line over New Zealand, Inter European and Austria lines and Hyundai Merchant Marine over Center-South America lines, in terms of the volume of transport. And small-to-medium sized shippers are prevailing in lines which are adjacent to Korea, Such as Japan lines and East-South Asian lines. 3. In relation to hinterlands and forelands of Choyang Line, the light industry goods, electric goods and machinary produced in Seoul and Pusan are exported to the major ports in Europe and Japan, the same produces in Suwon, Ulsan, Kumi are exported to European Ports, and those in Incheon and Kwangju Austrian and Japanese ports, and those in the rest regions to the major port in Japan. 4. In relation to hinterlands and forelands of Hanjin Shipping, the light industry goods pro-ducing in Seoul and Pusan, the electric goods and machinary in Incheon and Pyeongteck, are exported to New York and Los Angeles. Electric goods and machinary Masan, Anyang, Cheona, Cheongju and Incheon, Electric goods machinary and light industry goods in Kwangju and non mental goods in Pohang, are exported New York, Los Angeles and Oakland. 5. In relation to hinterlands and forelands of Hyundai Merchant Marine, the region of Seoul, Pusan and Incheon closely related with the main ports in U.S.A. The rest regions with Montreal. The hinterlands of export container cargo can be classified by its export items into three kinds: the large city, industrial city and the rest city. Choyang Line's forelands are European lines, Japan lines and Austria lines, and Hanjin Shipping's forelands are North America lines, and Hyundai Merchant Marine's forelands are North America lines and Japan line. 3 National flag carriers' major forelands are determined by the size of port and the shipper's convenient use of the port terminal.

• KDI Journal of Economic Policy
• /
• v.30 no.1
• /
• pp.1-31
• /
• 2008

Various opinions have been suggested to explain the slump in equipment investment, such as increased government regulations, shareholder-oriented management by expanded foreign equity investment, response against M&A threats, conservative investment trends seen after a series of bankruptcy of large conglomerates (amidst crumbling myth of "Too Big to Fail"), and financial restructuring. Some also argued that the increased uncertainty in business environment is mainly responsible for conservative management, though there are few domestic studies made regarding the situation. But, in other countries, including the U.S., studies have shown that more volatility is seen now surrounding stock prices, profitability, and sales growth rate reflecting business performance. Also, there are other studies showing such expanded volatility have led to conservative management by businesses. In this regard, this study reviews the volatility conditions of business performance of Korean companies based on profitability, and then attempts to analyze the impact on investment brought on by increased volatility. Each company's profitability volatility used here is from the standard deviation of companies for the past five years. As a profitability indicator, the ROA (= operating profit/total asset) is used. According to the analysis, profitability volatility has remarkably increased from the mid 3% in 1994 to low 5% in 2005. Profitability volatility of the Korean companies has expanded to a great extent since the financial crisis. The crisis might have served to raise the volatility in the macroeconomic conditions. If increased volatility observed during the economic crisis had gradually declined after the crisis, the situation could be interpreted as a temporary phenomenon, not to be too concerned over. But, this was not the case for Korea. The volatility level, after the crisis, has not dropped back to its pre-crisis level. Hence, in the Korea's case, high volatility cannot be explained by the impact of financial crisis. Not only that, the fact that such expansion is seen in every industrial sector indicates that this phenomenon cannot be explained by the composition change of industries alone. An undergoing study shows that with a rapid spread of globalization, industries fiercely competing with China experience more volatility. Such increased volatility tends to contract investment, and since the crisis the impact of volatility on investment has slightly increased. It is noteworthy that this study only includes a part of 'uncertainty' that could be measured statistically. For instance, the profitability volatility indicator used in this study is unable to reflect all the effects that the tacit reduction of protection by the government or regulations might have made. So, the result here also indicates that other 'uncertain' factors not mentioned in this study may have served to contract investment sentiment. It would be impossible for policies to completely remove uncertainties measured by profitability volatility, but at least it is necessary to put effort to reduce the macroeconomic volatility in the future economic management. Stabilized macroeconomic management may not be enough to diminish all volatility that occurs within each company, but it would make a meaningful contribution in encouraging investment.

• 대한공업교육학회지
• /
• v.33 no.2
• /
• pp.192-217
• /
• 2008

This paper investigated the perceived criticalities and patterns of Korean Professional Engineer's competency regarding the working activities of automative product development, manufacturing, etc by using questionnaires responded to the survey which were applied to the automotive professors, experts and professional engineers (vocational parties) by e/mail, etc. This research investigated the following questions: First, what are the characteristic patterns, relevancy and perceived criticalities of Korean Professional Engineer's competencies? Second, What are the ranked priority of the Korean Professional Engineers' competencies? Are there any differency for each item, sub group of job, intelectual criterior of the competencies between relevancy and perceived criticalities according to the types of vocational parties, etc.? Accoring to the results; first, Professor group showed highest points among 3 groups per each item of the competencies by vocational parties Second, Chassis design group ranked top position among the 8 sub groups by vocational parties and, third, Problem Solving Knowledge ranked highest points than any others. Korean Professional Engineers are found to be positioned as key members, leaders and managers on surveying market, product planning, designing product & components, developing component parts, establishing shop with production equipment, managing quality control & material handling, organizing relevant meetings, developing human resources by training and learning, to back up finance with law matters, cooperating with concerned parties to achieve organizational goals, and to coordinate projects. etc, identifying ethical issues and business skills in order to survive and win to be competitive in various kinds of the automotive industry battle fields.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.7 no.2
• /
• pp.79-86
• /
• 1974

The results from the experiment of natural collection and growth of arkshell(Anadara broughtoni, SCHRENCK) spat, which was collected at Seok-gok Bay located at Chang-weon-gun, Korea, and grown in the 1ittoral zone of Sa-gok-ri, Geo-je-gun, Korea, beginning from August 1,1973 to April 8,1974 are as follows; The larvae of arkshell came out from the very first day of the study August 1, which continued till the end of September, whose amount was not so much varied, but relatively continuous. The drifting larvae were also rather small amount, from which some 200 to 400 larvae were attached through the respective collecting equipment made from straw with the dimension of length 1.5m and breadth 12cm. It is regarded relatively large amount collected and recognised worth while enough to use as the industrial collecting method. The average shell length of spat attached was 0.54mm on 17th September, 4.11mm on 21st October, 10.47mm on 25th November in 1973 and 11.08mm on 8th April in 1974 whose progress was recognized relatively faster, comparing with the other up-to date report, The relationship between the shell length(L) and the longest radial rib(R) was as follows: Below 2.5mm of the shell length: R=0.7393 L -0.0080 Above 2.5mm of the shell length: R=0.8253 L-0.2595 And the relationship between the shell length (L) and the shell breadth (B) was as follows: Below 2.5mm of the shell length: B=0.3505 L +0.0527 Above 2.5mm of the shell length: B=0.4631 L -0.3602 The exponential curve equation between shell length (L) and the total weight (W)was as follows : Below 16mm of the shell length: W=0.19957 $L^{2.5726}$ Above 16mm of the shell length: W=0.20602 $L^{2.8400}$ In view of the above the relative growth among the shell length, the longest radial rib and the shell breadth was changed in the vicinity of 2.5mm of the shell length. And relationship between the shell length and the total weight was changed in the vicinity of 16mm of the shell length.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.06a
• /
• pp.110-120
• /
• 2005

For utilizing vitrification to treat low and intermediate level waste, industrial pilot plant was designed and constructed in October 1999 at Daejon, Korea through the joint research program among NETEC, MOBIS and SGN. More than 70 tests were performed on simulated IER, DAW etc. including key nuclide surrogate(Cs, Co); this plant has been shown to vitrify the target waste effectively and safely, however, some dust are generated from the HTF(High Temperature Filter) as a secondary waste. In case of long term operation, it is also concerned that pipe plugging can be occurred due to deposited dust in cooling pipe namely, connecting pipe between CCM(Cold Crucible Melter) and HTF. In this regard, we have developed the special complementary system of the off-gas treatment system to recycle the dust from HTF to CCM and to remove the interior dust of cooling pipe. Main concept of the dust recycling is to feed the dust to the CCM as a slurry state; this system is regarded as of an important position in the viewpoint of volume reduction, waste disposal cost and glass melt control in CCM. The role of DRS(Dust Recycling System) is to recycle the major glass components and key nuclides; this system is served to lower glass viscosity and increase waste solubility by recycling B, Na, Li components into glass melt and also to re-entrain and incorporate into glass melt like Cs, Co. Therefore dust recycling is helpful to control the molten glass; it is unnecessary to consider a separate dust treatment system like a cementation equipment. The effects of Dust Cleaner are to prevent the pipe plugging due to dust and to treat the deposited dust by raking the dust into CCM. During the pilot vitrification test, overall performance assessment was successfully performed; DRS and Dust Cleaner are found to be useful and effective for recycling the dust from HTF and also removing the dust in cooling pipe. The obtained operational data and operational experiences will be used as a basis of the commercial facility.

• Journal of the Korean Society for Library and Information Science
• /
• v.34 no.1
• /
• pp.265-295
• /
• 2000

Education of library and information science must focus on practical education acted upon as a laboratory room in the characteristics of learning, because it cultivates a librarian as an information expert who can conduct professional affairs and services, applying traditional theory to the practical business of library and information. This dissertation suggested a new paradigm of an instructional media center as an advanced laboratory room which faithfully can run the curriculum of a library and information science for cultivating librarians, information experts who can satisfy the 21C information society. To carry out this purpose, I considered the various opinions of professors and librarians, after investigating and analyzing facilities and furnishings of laboratory rooms and teaching and learning data related to departments of library and information science in 32 universities. These contents can be summarized as follows : 1) Constructional media centers connected to education of library and information science sets laboratory rooms for practical classification and cataloging classes; laboratory rooms for film media which can utilize advanced media, listening tools, and practical materials; information management laboratory rooms which can experience the various information research methods through the Internet, cultivate the ability of information application, and teach the curriculum of library and information science related to computers. 2) Arrangement plans linked to laboratory rooms for classification and cataloging, one for film media, and one for information proceedings are as follows: , , and . 3) The size of each room is $162m^2$ (49.1pying); the number of persons to be admitted is about 40 to 50; each room has one media expert and one assistant as operating manager of exclusive responsibility. 4) Instructional & learning data which must be contained as instructional media of library and information science include computers, marginal tools related to it, listening materials, supplies for ordering books, teaching aids containing various equipment and tools, textbooks for practice, books connected to classification and cataloging for practice, and textbooks related to practical subjects and reference books. 5) Industrial media centers belonging to library and information science require for practice, general furnishings like bookshelves, and various material depository boxes.

• Journal of the Korean Institute of Gas
• /
• v.24 no.2
• /
• pp.1-8
• /
• 2020

Centrifugal pump is a facility that transfers energy to fluid through centrifugal force, which is usually generated by rotating the impeller at high speed, and is a major process facility used in many LNG production bases such as vaporization seawater pump, industrial water and fire extinguishing pump using seawater. to be. Currently, pumps in LNG plant sites are subject to operating conditions that vary depending on the amount of supply desired by the customer for a long period of time. Pumps in particular occupy a large part of the consumption strategy at the plant site, and if the optimum operation condition is not available, it can incur enormous energy loss in long term plant operation. In order to solve this problem, it is necessary to identify the performance deterioration factor through the flow analysis and the result analysis according to the fluctuations of the pump's operating conditions and to determine the optimal operation efficiency. In order to evaluate operation efficiency through experimental techniques, considerable time and cost are incurred, such as on-site operating conditions and manufacturing of experimental equipment. If the performance of the pump is not suitable for the site, and the performance of the pump needs to be reduced, a method of changing the rotation speed or using a special liquid containing high viscosity or solids is used. Especially, in order to prevent disruptions in the operation of LNG production bases, a technology is required to satisfy the required performance conditions by processing the existing impeller of the pump within a short time. Therefore, in this study, the rotation difference of the pump was applied to the ANSYS CFX program by applying the modified 3D modeling shape. In addition, the results obtained from the flow analysis and the curve fitting toolbox of the MATLAB program were analyzed numerically to verify the outer diameter correction theory.

• 대한공업교육학회지
• /
• v.45 no.1
• /
• pp.63-83
• /
• 2020

The purpose of this study is to provide the basic materials needed to plan the NCS Learning Module to be used effectively in practical courses. In this study, teachers and students' satisfaction surveys were collected about the NCS (National Competency Standards) learning module, career and field practice, practical environment used in the construction subject course. This study was conducted on public high schools in Chungcheong province (including Daejeon), which is operating practice course using the NCS learning module. The research questions are as follows; First, how was the satisfaction of teachers and students in the practical subject class using NCS learning module? Second, what is the degree of satisfaction of teacher's career and field practice guidance, student's career decision and field practice after the practical course using NCS learning module? Third, the satisfaction level of the developed NCS learning module and practical subject class using the same was determined by setting whether the number of training of NCS-related teachers or the presence or absence of on-the-job training of students were affected? The results of the study are as follows; As a result of comparing the teachers' and students' satisfaction, the students showed satisfaction in all items, whereas the teachers showed 'content level', 'interest', 'necessary knowledge', 'skill acquisition', 'Improvement of practical skills (level of skill performance)', 'scale of experimental practice', and 'items of experimental practice equipment' were dissatisfied. It was found that the number of NCS related teachers' training (or absence) or the presence of students on the field had an effect on the satisfaction of the developed NCS learning module and the practical course using it. In order to fully utilize the developed NCS learning module in the practical course, it is required to develop and construct the teaching material of the teacher who can serve as an intermediary for conceptualization and understanding of job skills. It is necessary to increase the number of education and training specialists to positively reflect the demands of the education field.