• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.8
• /
• pp.718-725
• /
• 2004

The real-time industrial network, often referred to as fieldbus, is an important element for intelligent manufacturing systems. Thus, in order to satisfy the real-time requirements of field devices, numerous fieldbus protocols have been announced. But, the application of fieldbus has been limited due to the high cost of hardware and the difficulty in interfacing with multi-vendor products. Therefore, as an alternative to fieldbus, the computer network technology, especially Ethernet (IEEE 802.3), is being adapted to the industrial environment. However, the crucial technical obstacle for Ethernet is its non-deterministic behavior that makes it inadequate for industrial applications where real-time data have to be delivered within a certain time limit. Recently, the development of switched Ethernet shows a very promising prospect for industrial application due to the elimination of uncertainties in the network operation resulting in much improved performance. This paper focuses on the application of the switched Ethernet with cascade structure for industrial communications. More specifically, this paper presents an analytical performance evaluation of switched Ethernet with cascade structure, and a case study about networked control system.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.1125-1128
• /
• 1989

In this paper, the inverse model of a servo system is realized in a PDP-type neural network. The neural network learns the mapping between the input and output of the servo system. Some simulation results show the effectiveness of this inverse model obtained here.

• International Journal of Internet, Broadcasting and Communication
• /
• v.8 no.1
• /
• pp.64-68
• /
• 2016

These fields are integrated to visualize and finalize the proposed development, in simulation environment. SCADA (supervisory control and data acquisition) systems and distributed control systems (DCSs) are widely deployed in all over the world, which are designed to control the industrial infrastructures, in real ways. To supervise and control the various parts of designed systems; trends to require a deep knowledge to understand the overall functional needs of industries, which could be a big challenge. Industrial field devices (or network sensors) are usually distributed in many locations and are controlled from centralized site (or main control center); the communication provides various signs of security issues. To handle these issues, the research contribution will twofold: a method using cryptography is deployed in critical systems for security purposes and overall transmission is controlled from main controller site. At controller site, multimedia components are employed to control the overall transmission graphically, such as system communication, bytes flows, security embedded parameters and others, by the means of multimedia technology.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.1
• /
• pp.137-142
• /
• 2014

Industrial control system (ICS) is a computer based system which are typically used in nation-wide critical infra-structure facilities such as electrical, gas, water, wastewater, oil and transportation. In addition, ICS is essentially used in industrial application domain to effectively monitor and control the remotely scattered systems. The highly developed information technology (IT) and related network techniques are continually adapted into domains of industrial control system. However, industrial control system is confronted significant side-effects, which ICS is exposed to prevalent cyber threats typically found in IT environments. Therefore, cyber security vulnerabilities and possibilities of cyber incidents are dramatically increased in industrial control system. The vulnerabilities that may be found in typical ICS are grouped into Policy and Procedure, Platform, and Network categories to assist in determining optimal mitigation strategies. The order of these vulnerabilities does not necessarily reflect any priority in terms of likelihood of occurrence or severity of impact. Firstly, corporate security policy can reduce vulnerabilities by mandating conduct such as password usage and maintenance or requirements for connecting modems to ICS. Secondly, platfom vulnerabilities can be mitigated through various security controls, such as OS and application patching, physical access control, and security software. Thirdly, network vulnerabilities can be eliminated or mitigated through various security controls, such as defense-in-depth network design, encrypting network communication, restricting network traffic flows, and providing physical access control for network components.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.7
• /
• pp.594-601
• /
• 2000

EIA-709.1 Control Network Protocol is the basic protocol of LonWorks systems that is emerg-ing as a fieldbus device. In this paper the protocol is implemented by using VHDL with FPGA and C program on an Intel 8051 processor. The protocol from the physical layer to the network layer of EIA-709.1 is im-plemented in a hardware level,. So it decreases the load of the CPU for implementing the protocol. We verify the commercial feasibility of the hardware through the communication test with Neuron Chip. based on EIA-709.1 protocol which is used in industrial fields. The developed protocol based on FPGA becomes one of IP can be applicable to various industrial field because it is implemented by VHDL.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.8
• /
• pp.1993-1997
• /
• 2009

Robust control for DC servo motor is needed according to the highest precision of industrial automation. However, when a motor control system with PID controller has an effect of load disturbance, it is very difficult to guarantee the robustness of control system. As a compensation method solving this problem, in this paper, PID-neural network hybrid control method for motor control system is presented. The output of neural network controller is determined by error and rate of error change occurring in load disturbance. The robust control of DC servo motor using neural network controller is demonstrated by computer simulation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.4
• /
• pp.313-319
• /
• 2000

As the interest of flexible manufacturing systems and computer integrated manufacturing systems increase, the distribution of centralized control systems using industrial control networks is getting more attention. In this paper, we investigate the rate-based traffic control of industrial control networks to improve the performance regarding the throughput, fairness, and error rates. Especially, we consider the protocol of Lon-$Works^{(TM)}$ which consists of all OSI 7-layers and supports various communication media at a low cost. Basically, the proposed rate-based traffic control system is closed loop by utilizing the feedback channel errors, which shows improved performance when compared with other industrial control networks commonly operated in open loop. To this end, an additional network node called monitoring node is introduced to check the channel status without increasing the channel load. The Proposed control loop is in effect whenever the feedback channel error becomes greater than an admittable value. We demonstrate the improved performance of the controlled network system in view of throughput and fairness measures by implementing the lab-scale network system based on LonWorks and through the experimentation upon it.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.31 no.3
• /
• pp.110-116
• /
• 2008

Operational strategy for inventory control in the distribution system has been given attention. If an individual enterprise implements the strategy, it is not easy to gain scale merits because of limited quantity or burden of inventory. In this study, we propose an operational strategy for inventory control that considers managerial integration of regional distribution centers (RDCs) and present a model of it. In a network of several RDCs, they could share inventory information and supply parts for others in case of an inventory shortage. And a numerical example of the network is illustrated, which compares two operational strategies, integration management of RDCs and individual management of them. The result shows total cost reduction in the strategy of integration management through the efficient inventory control of multi-echelon distribution.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3193-3199
• /
• 2009

The real-time intelligent home network control system is the system which can control and monitor intelligent home network anytime and anywhere with mobile devices. In this study, to embody the real-time control system for intelligent home network, I designed the sub-module which can control various USN senses with using ZigBee, and organized the GUI environment into the client module to drive by users with mobiles devices.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.115-118
• /
• 2000

This paper describes the method to control the multimotor drive system with network. The LonWorks network which is a leading industrial control network is applied to the yard crane position control system driven by three motors. The host computer is able to control and monitor three motor drive systems in a yard crane through network. The performance of proposed method is verified on experiments with simulator of yard crane.