• Corrosion Science and Technology
• /
• v.20 no.4
• /
• pp.175-182
• /
• 2021

Magnesium alloy is limited in the industrial field because its standard electrode potential is -2.363 V vs. NHE (Normal Hydrogen Electrode) at 25 ℃. This high electrochemical activity causes magnesium to quickly corrode with oxygen in air; chemical conversion coating prevents corrosion but causes surface defects like cracks and pores. We have examined the anti-corrosion effect of sol-gel coating sealed on the defected conversion coating layer. Sol-gel coatings produced higher voltage current and smaller pore than the chemical conversion coating layer. The conversion coating on magnesium alloy AZ31 was prepared using phosphate-permanganate solution. The sol-gel coating was designed using trimethoxymethylsilane (MTMS) and (3-Glycidyloxypropyl) trimethoxysilane (GPTMS) as precursors, and aluminum acetylacetonate as a ring-opening agent. The thermal shock resistance was tested by exposing specimens at 140 ℃ in a convection oven; the results showed changes in the magnesium alloy AZ31 surface, such as oxidization and cracking. Scanning electron microscope (FE-SEM) analysis confirmed a sealed sol-gel coating layer on magnesium alloy AZ31. Electrochemical impedance spectroscopy (EIS) measured the differences in corrosion protection properties by sol-gel and conversion coatings in 0.35 wt% NaCl solution, and the potentiodynamic polarization test and confirmed conversion coating with the sol-gel coating show significantly improved resistance by crack sealing.

• 한국전기화학회:학술대회논문집
• /
• 2002.10a
• /
• pp.49-49
• /
• 2002

• 한국전기화학회:학술대회논문집
• /
• 2001.10a
• /
• pp.15-15
• /
• 2001

• Bulletin of the Korean Chemical Society
• /
• v.14 no.6
• /
• pp.755-757
• /
• 1993

• Journal of the Korean Chemical Society
• /
• v.64 no.6
• /
• pp.443-446
• /
• 2020

• Bulletin of the Korean Chemical Society
• /
• v.6 no.4
• /
• pp.248-249
• /
• 1985

• Bulletin of the Korean Chemical Society
• /
• v.11 no.2
• /
• pp.140-143
• /
• 1990

Ethanolic tetra carbonylhydridoferrate solution combined with dialdehyde (no of carbon; 4,5,6) is very efficient for the selective transformation of amino group into N-heterocyclic compound. However, a large variety of both aliphatic and aromatic amines react with the ferrate-pimelaldehyde at room temperature under an atmospheric pressure of carbon monoxide to give the corresponding N-(cyclohexylmethyl)-N-alkyiamine derivatives in moderate yields instead of the corresponding N-substituted perhydroazocine derivatives.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.10 no.1
• /
• pp.179-207
• /
• 2000

Hazardous organic solvents management as prescribed by presidential decree in Korea is reviewed. The status of import, manufacture, and circulation of organic solvents was investigated. Problems inherent in the management of organic solvents in the electroplating, metal degreasing, and dry cleaning industries were discussed. The chemical substance management system in Korea was compared to those of foreign organizations. A walk-through check list was developed and then used to assess the actual conditions and potential hazards of chemical substances in these industries. The questionnaire could be used to develop a chemical management system and protect workers from hazardous substances. Based on the results of the site survey, MSDSs were not integrated appropriately into the workers education and were not readily accessible to employees. In the case of the dry cleaning industry, the new dry cleaning solvent used as a substitute includes a lot of potentially hazardous organic solvents. This research is preliminary. It is recommended that a national survey be performed to better identify the current situation. Because chemical substances are regulated by thirteen laws in seven executive branches, management systems often overlap, resulting in ineffective control. Using the above results, a model for managing chemical substances was developed. This will more efficiently provide MSDS information to workers covered by the presidential decree and allow the construction of a management system database for better cooperation with the executive branches in Korea.

• Journal of Industrial and Engineering Chemistry
• /
• v.67
• /
• pp.187-198
• /
• 2018

Clay based coating with zwitterionic functionality is used to remove cationic and anionic dyes. Adsorbent coating was prepared by the mixing of bentonite clay, acrylic polymer (AP) and polyethylene-diamine (EPI-DMA). Characterization was performed using SEM-EDX, XRF, X-ray mapping and FTIR analyses. The adsorption capacity of ZACC was found to be increased from 59.35 to 255.99 mg/g and from 45.84 to 70.09 mg/g for BG and AR1 dyes, respectively using initial concentration (50-200 ppm). Significant adsorption capacity along with mechanical and chemical stability formulates ZACC as an excellent composite coating for treatment of anionic and cationic dyes from industrial wastewater.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.16 no.1
• /
• pp.68-80
• /
• 2006

This study aimed to prepare the fundamental data and assess the status and trend of exposure level for 5 chemical substances such as sulfuric acid, hydrogen chloride, ammonia, formaldehyde and phenol in manufacturing industry by type of industry, working process, and size of factory, chronological change. Subjects related to this study consist of 146 factories, 12 industries and 17 working processes located in Busan area from Jan. 1997 to Dec. 2001. 1. All 5 kinds of chemical substances by type of industry, working process were generated in chemical manufacturing industry. There were founded in 8 types of industries and 13 types of working processes for ammonia, which is the highest number of in all 5 chemical substances. 2. In terms of the exposure level for 5 chemical substances by type of industry, working process, geometric mean concentration for sulfuric acid was $0.40mg/m^3$ in manufacture of chemicals and chemical products, $0.30mg/m^3$ in compounding process, for hydrogen chloride was 0.57 ppm in manufacture of basic metal, 0.48 ppm in dyeing process, for ammonia was 1.11 ppm in manufacture of rubber and plastic products, 0.94 ppm in buffing process, for formaldehyde was 0.49 ppm in manufacture of wood and of products of wood and cork, except furniture; manufacture of articles straw and plating materials, 0.53 ppm in mixing process, and for phenol were 0.53 ppm in manufacture of chemical and chemical products, 0.55 ppm in compounding process, respectively. Results for 5 chemical substances by type of industry and working process were significantly higher than those of the others(p<0.05). 3. The exposure level for hydrogen chloride, formaldehyde were significantly increased by size of industry (p<0.01). ammonia was significantly decreased by size of industry (p<0.01). 4. In trend of the concentration difference of five chemical substances by chronology, geometric mean concentration for sulfuric acid was significantly increased (p<0.01), hydrogen chloride and ammonia were significantly decreased by year (p<0.05) and for formaldehyde and phenol were decreased in chronological change. According to the above results 5 chemical substances were founded together in a way mixed in the same places one another and concentrations of chemical substances by industry, working process, size of industry and year appeared markedly. The authors recommend more systemic and effective work environmental management should be conducted in workplaces generating five chemical substances.