• 한국산업보건학회지
• /
• 제16권1호
• /
• pp.36-43
• /
• 2006

The principal aim of this field study was to determine the concentrations and emissions of gaseous contaminants such as ammonia and hydrogen sulfide in the different types of pig buildings in Korea and allow objective comparison between Korea and the other countries in terms of pig housing types. This field study was performed from May to June and from September to October in 2002. Pig buildings investigated in this research were selected in terms of three criteria; manure removal system, ventilation mode and growth stage of pig. Measurements of concentration and emission of ammonia and hydrogen sulfide in the pig buildings were done in 5 housing types and the visited farms were 15 sites per each housing type. Concentrations of ammonia and hydrogen sulfide were measured at three locations of the central alley in the pig building and emission rates of them were estimated by multiplying the average concentration($mg/m^3$) measured near the air outlet by the mean ventilation rate($m^3/h$) and expressed either per pig of liveweight 75kg(mg/h/pig) or per area($mg/h/m^2$). Concentrations of ammonia and hydrogen sulfide in the pig buildings were averaged to 7.5 ppm and 286.5 ppb and ranged from 0.8 to 21.4 ppm and from 45.8 to 1,235 ppb, respectively. The highest concentrations of ammonia and hydrogen sulfide were found in the mechanically ventilated buildings with slats; 12.1 ppm and 612.8 ppb, while the lowest concentrations of ammonia and hydrogen sulfide were found in the pig buildings with deep-litter bed system(2.2 ppm) and the naturally ventilated pig buildings with manure removal system by scraper(115.2 ppb), respectively(p<0.05). All the pig buildings were investigated not to exceed the threshold limit values(TLVs) of ammonia(25 ppm) and hydrogen sulfide(10 ppm). The mean emissions of ammonia and hydrogen sulfide per pig(75kg in terms of liveweight) and area($m^2$) from pig buildings were 250.2 mg/h/pig and 37.8 mg/h/pig and $336.3mg/h/m^2$ and $50.9mg/h/m^2$, respectively. The pig buildings with deep-litter bed system showed the lowest emissions of ammonia and hydrogen sulfide(p<0.05). However, the emissions of ammonia and hydrogen sulfide from the other pig buildings were not significantly different(p>0.05). Concentrations and emissions of ammonia and hydrogen sulfide were relatively higher in the pig buildings managed with deep-pit manure system with slats and mechanical ventilation mode than the different pig housing types. In order to prevent pig farm workers from adverse health effect caused by exposure to ammonia and hydrogen sulfide in pig buildings, they should wear the respirators during shift and be educated sustainably for the guideline related to occupational safety.

• 한국사회복지학
• /
• 제37권
• /
• pp.119-141
• /
• 1999

본고는 산재보험 급여체계 내에서 나타나고 있는 일부급여의 비합리적 과잉급여 현상과 협소한 급여범위와 급여의 미흡성 그리고 제한성 문제는 장기적으로 사회보험의 건전한 체제정립을 저해함은 물론 장기적으로 불공평성으로 인한 수급자의 제도에 대한 왜곡인식과 악용이 늘게되고 가입자의 제도 참여에 대한 불만과 회의적 시각이 누적되어 결국은 제도에 대한 신뢰를 상실시킬 수 있다는 우려에서 연구의 필요성을 인식하였다. 산재보험에 있어서 궁극적인 목적인 급여의 적절성을 보장하기 위하여 급여에 의하여 수급자가 오히려 부를 축적할 수 있는 기회로 왜곡되거나 또는 급여체계의 목적에서 벗어난 적정이상의 소득이 발생되지 않도록 하여야 하는 점도 급여체제의 올바른 기능 수행에 있어서 중요한 과제로 판단하였다. 또한 사회보험제도 내에서 각 급여부분의 보장 수준에 평준화를 통하여 수급권자가 일부 급여에 대하여 집착을 보이지 않도록 하는 급여별 보장 수준의 평준화의 확립도 중요한 제도적 발전의 관건으로 인식하여 급여의 적절성과 평준화를 위한 문제점과 개선방안을 제시하고자 하였다. 다만 무분별한 급여수준의 삭감은 오히려 사회보험 발전에 저해요소로 작용할 위험이 높은 점을 감안하여 급여제도의 함으로 인하여 제도가 목적으로 하지 않는 비합리적인 부분으로서 적정이상의 급여를 제거하고, 오히려 급여부분에서 상대적으로 급여의 협소성과 미흡성으로 지적되는 보장기능에 대한 보완 작업을 통하여 제도 자체의 급여체제에 대한 형평성 및 공평성을 확보할 수 있는 대안을 제시하고자 하였다. 따라서 본 연구에서는 산재보험 급여체제에 있어서 과잉 또는 중복 지급되는 급여부분을 구체적으로 지적하고 이를 급여에 있어서 미흡한 부분으로 전환 방안을 제시함으로써 제도의 합리성을 확보하고 제도의 건전성을 확보함으로써 산재보험의 장기적인 제도발전에 기여하고자 하였다.

• 한국직업건강간호학회지
• /
• 제10권2호
• /
• pp.142-152
• /
• 2001

This study examined all the papers published in the Journal of Occupational Health Nursing from 1991 to May 2000 based on an objective frame of evaluation. The purpose of study is to prospect the trend of occupational nursing research and to provide an optimal direction for future occupational nursing service. The results of total 94 studies were analyzed as follows. 1. The number of papers published in 1991-1992, 1993-1995, 1996-1997 was not significantly increased. However, the number of papers were obviously increased after 1998. 2. In the design of research, survey studies were definitely dominant. But, they are gradually decreasing and experimental studies are increasing. 3. In the fields of research, health problems, health risk factors and health awareness were higher than others. Occupational health nurse's task and job satisfaction were main areas of research until the middle of 1990's. However, after then, not only health problem, risk factor and awareness of health but also health promotion and preventive health behavior are increasing in the research areas. 4. The collaborative researches have gradually increased and the type of author has been varied. The number of researches completed by funds was undertaking only 3 among the total 94. 5. In the research analysis, except for case studies and literature studies, the research subjects have been shifted from the occupational health nurses to the industrial workers, and more diversified. The sample size has been enlarged and the major place of the study is industry. The questionnaire was used in many studies as instrument for data collection and measurement. But, complementary methods of diverse instruments have been increased. The method of data analysis has obviously showed some changes moving from descriptive statistics to inferential and advanced statistics. 6. The ways of nursing intervention have prominently diversified in experimental studies. The contents of case studies were mainly focused on the health management programs and activities in industry. The research concepts and the contents of literature study were also changed progressively in various way. Based on the above findings, conclusions are extended to the following discussion: Since the Korean Academic Society of Occupational Health Nursing was instituted in 1990, the researches of occupational health nursing have shown an acute methodological development in both quantity and quality. However, they were considered still in the lack of research verifying the effects of nursing intervention program. Also, the development of nursing intervention and nursing theory lacked. Therefore, more empirical researches are strongly needed to utilize the field of occupational health nursing in Korea Researchers are also encouraged to exert more efforts to get research funds.

• 대한공업교육학회지
• /
• 제36권1호
• /
• pp.47-73
• /
• 2011

본 연구의 목적은 인천지역 특성화 고등학교의 산학협력 담당교사인 가칭 산학협력부장 등이 인식하는 산학협동교육을 알아보는 것이다. 연구의 목적을 달성하기 위해 질문지를 통한 조사연구를 실시하여 산학협동교육에 대한 인식을 교육과정(목적 및 내용), 지원체제를 포함한 운영체제(구축 및 활동 수준), 교육(진행 및 효과성, 문제점, 강화방안)을 중심으로 살펴보았다. Likert 5점 척도를 사용하여 설문한 다음 빈도, 평균, 표준편차 등 기술통계로 알아보았다. 설문조사에서 나타난 결과를 종합적으로 살펴보면, 산학협력에서 나타난 성과는 대체로 높은 것으로 판단되나, 아직까지 산학협력 이해관계자의 인식이나 의지가 부족하여 참여가 미흡하고, 이해관계자를 연결하고 조정하는 매개기구가 부족한 것이 문제점으로 나타났다. 또한, 산학협력의 활성화 및 효율화를 위한 정책 및 법적 제도적, 재정적 인프라가 아직 완벽하게 구축되지 않아 운영에 미숙한 점이 많고, 특히 직업교육기관 내부의 조직이나 인원의 인프라 구축이 결정적으로 미흡한 것으로 나타났다. 성공적인 산학협동교육이 그 목적을 달성하기 위해서는 첫째, 학교 경영자들의 참여 의지 제고, 교사들의 적극성 제고, 학생들의 적극적인 참여를 위한 직업교육기관의 비전과 선언, 교원들의 업무과중을 줄이기 위한 학교 업무 재구조화, 학교 문화의 개선 등의 내적요인과 둘째, 지역 내 인적 물적 자원의 연계활용을 위한 산학협력 포럼, 산학협력 네트워크 센터 협의처, 학교 내부의 산학협의체 등 내부와 외부를 연결하는 고리, 셋째, 정부 등의 로드맵 및 전략, 지속적인 지원기구 및 법적 제도적 산학협력 인프라의 구축 등의 외적 요인이 동시에 이루어져야 한다.

• 농촌계획
• /
• 제19권4호
• /
• pp.81-93
• /
• 2013

The selection of land for fishing village development project, and the standard used to classify fishing villages has been determined based on the guidelines developed by fishing village cooperatives. The approach fishing village cooperatives follows is likely to classify fishing villages without first reflecting on the overall development environment of the region, such as other industries and workers in the area. It also acts as a barrier for business promotion or evaluation, because the cooperatives do not match the administrative districts, which are the units of administration, and the main policy enforcement agent in regional development. Against this background, this study aimed to identify categories to situate the development direction, as well as the size and distribution of fishing villages based on eup, myeon, and dong administrative units as defined by the Fishing Villages and Fishery Harbors Act. This study was based on the Census of Agriculture, Forestry, and Fisheries of 2010, and analyzed 826 eups, myeon, and dongs with fishery households using the principal component analysis, and 2-Step cluster analysis methods. Therefore, 95% of the variance was explained using the covariance matrix for types of fishing villages, but it was analyzed as one component focusing on the number and ratio of fishery households, and used the cluster-type analysis, which focused on the sizes of fishing villages. The clusters were categorized into three types: (1) the development type based on the number of fishermen in the eups, myeons and dongs was analyzed as village size (682); (2) administrative district size (121); and (3) total eups, myeons and dongs (23), which revealed that the size of most fishing villages was small. We could explain 73% of the variance using the correlation coefficient matrix, which was divided into three types according to the three principal component scores, namely fishery household power, fishery industry power, and fishing village tourism power. Most fishing villages did not have a clear development direction because all business areas within the region were diversified, and 552 regions could be categorized under the harmonious development type, which is in need of balanced development. The fishery industry type typified by industrial strength included 159 regions in need of an approach based on industrialization of fishery product processing. Specialized production areas, which specialized in producing fishery products, were 115 regions with a high percentage of fishermen. The analysis results indicated that various situations in terms of size and development of fishing villages existed. However, because several regions exist in the form of small village units, it was necessary to approach the project in a manner that directed the diversification of regional development projects, such as places for local residents to relax or enjoy tourism experiences within the region, while considering the overall conditions of the relevant eups, myeons, and dongs. Reinforcement of individual support for fishermen based on the Fisheries Act must take precedence over providing support for fishermen through regional development. In addition, it is necessary to approach the development of fishing villages by focusing on industrializing the processing techniques of fishery products. Areas specialized in the production of fishery products are required to consider the facilities for fisheries production, and must make efforts to increase fishery resources, such as releasing fry.

• 한국산업보건학회지
• /
• 제26권2호
• /
• pp.225-236
• /
• 2016

Objectives: Nanomaterials have been used in various fields. As use of nanoproducts is increasing, workers dealing with nanomaterials are also gradually increasing. Exposure assessments for nanomaterials have been carried out for protection of worker's health in workplace. Exposure studies were mainly focused on manufacturing processes, but these studies on after-treatment processes such as refinement, weighing, and packing were insufficient. So, we investigated exposure characteristics of particles during after-treatment processes of $Al_2O_3$ fibers and Ni powders. Methods: Mass-production of Ni powder process was carried out in enclosed capture-type canopy hood. In a developing stage, $Al_2O_3$ was handled with a local ventilation unit. Exposure characteristics of particles were investigated for $Al_2O_3$ fiber and Ni powder processes during the periods of 10:00 to 16:00, 20 May 2014 and 13:00 to 16:00, 21 May 2014, respectively. Three real-time aerosol instruments were utilized in exposure assessment. A scanning mobility particle sizer(SMPS, nanoscan, model 3910, TSI) and an optical particle counter(OPC, portable aerosol spectrometer, model 1.109, Grimm) were used to determine the particle size distribution in the size range of 10-420 nm and $0.25-32{\mu}m$, respectively. In addition, a nanoparticle aerosol monitor(NAM, model 9000, TSI) was used to measure lung-deposited nanoparticle surface area. Membrane filters(isopore membrane filter, pore size of 100 nm) were also used for air sampling for the FE-SEM(model S-5000H, Hitachi) analysis using a personal sampling pump(model GilAir Plus by 2.5 L/min, Gilian). Conclusions: For Ni powder after-treatment process, only 27% increase in particle concentration was found during the process. However, for $Al_2O_3$ fiber after-treatment process, significant exposure(1.56-3.34 times) was observed during the process.

• 한국산업보건학회지
• /
• 제27권3호
• /
• pp.245-256
• /
• 2017

Objectives: The present study is aimed at performing real-time measurement of fibrous materials using an F-1 fiber monitor, investigating the correlations between the measurements and environmental conditions, and assessing the feasibility of the use of the monitor in actual exposure assessments based on the accuracy and reliability of the device. Methods: Asbestos specimens with a fixed asbestos content were dispersed in a chamber and collected with a particle measuring test device. Measurements obtained by the existing PCM method, and with the F-1 fiber monitor were compared. In addition, concentrations of asbestos fibers obtained by the PCM method, the TEM method, and the F-1 fiber monitor were compared with that of specific ABS scenarios in NOA regions. Correlations of asbestos contents in soil and weather conditions with each method of measurement were analyzed. Results: Laboratory results showed that levels of asbestos fibers measured with each method increased as fiber contents in soil increased. In the accuracy and reproducibility assessment, no significant differences were found between the different methods of measurement. On-site assessment results showed positive correlations among the methods, and these correlations were less significant compared with what was shown by the laboratory results. Levels of asbestos fibers increased as asbestos contents in soil increased, and as temperature increased. Levels of asbestos fibers decreased as humidity increased, and wind speed did not significantly affect the extent to which asbestos fibers were scattered. Conclusions: While it would be premature to replace existing methods with the use of F-1 fiber monitors in real sites based on the results of this study, the monitor may be useful in the screening of the sites, which assesses hazard levels in different regions. Replacement of existing methods with the use of F-1 fiber monitors may be possible after the limitations identified in this study are overcome, and additional assessment data are obtained and reviewed under different conditions to confirm the reliability of the monitor in future research. Obtained assessment results may be used as basic data for the assessment of asbestos hazard in NOA regions.

• Journal of Preventive Medicine and Public Health
• /
• 제6권1호
• /
• pp.133-160
• /
• 1973

1. Introduction Community medicine with the concept of comprehensive medical care and an ideal medical care delivery system not only for an individual or family but for the whole community has emerged. In April 1970, the Presbyterian Medical Center started a hospital based community health service project in order to improve the health of the people in rural areas. Prior to commencing a comprehensive medical care system, a family survey was needed. The major objective of this survey was to obtain information concerning the people and their environment so as to be able to plan and implement a comprehensive medical care program in Soyang-Myun. 2. Survey Method An interview using a family record form was carried out for each household. This family record form was designed to get information about demography, family planning, environmental sanitation and vital statistics. Prior to beginning, the members of the survey team were trained in interviewing techniques for three days. The team consisted of a public health nurse, four nurse-aides, a sanitarian and four health extension workers who are working in our project, The survey was carried out during the period November 1971 to March 1972. 3. Project area 1) Population of Soyang-Myun was 11,668; male, 5,962 and female, 5,706. Sex ratio: 104.5. 2) Households : 1,858 3) Family size: The average household consisted of 6.3 persons. 4) Educational level of householder a. Illiterate 13% b. No schooling but able to read 10% c. Preschool children 19% d. Primary school 47% e. Middle school 7% f. High school 3% g. College or University 1% 5) Occupational distribution of householders a. Farmer 67% b. Laborer 13% c. Office worker 4% d. Merchant 4% e. Industrial worker 2% f. Unemployed 8% g. Miscellaneous 2% 6) Religious affiliation a. No religion 74% b. Buddhist 12% c. Protestant 10% d. Catholic 4% 4. Survey results Living Environment : a. Home ownership 95% b. Kinds of roofing Straw-thatched house 84% Tile-roofed house 10% Slate-roofed house 5% Other 1% c. Floor space Less than 6 pyong 10% 6-10 pyong 53% 11-15 pyong 24% 16-20 pyong 9% More than 20 pyong 4% d. Radio ownership 80% Environmental Sanitation : a. the source of drinking water public well 49% private well 30% drainage water 9% steam water 8% well pump 3% water distribution system 1% b. Distance between well and toilet more than 16meters 38% 6-10 meter 31% 11-15 meters 14% Less than 6 meters 17% c. The status of well management Bad 72% Fair 26% Good 2% d. General sanitary state of house Bad 37% Fair 51% Good 12% e. House drainage system had no house drainage. 77% Family Planning : a. 24% of the people have used contraceptives, but 12% ceased to use them. 76% have never used contraceptives. b. used methods 1oop 68% oral pill 16% vasectomy 4% condom 1% tubal ligation 1% two or more methods 10% Maternal Health : a. The number of conceptions of housewives under 50 years of age. 11 times 26% 6 times 11% 5 times 11% 4 times 9% b. The place of delivery own house 88% hospital 1% others 11% Treatment of general sickness : a. The place of treatment Soyang Health Center 31% Hospital (private or otherwise) 26% Pharmacy 14% Herb medicine 5% Private care 5% No treatment 12% Miscellaneous 7% b. Usual causes of diseases Unknown 46% Tuberculosis 29% Neuralgia 8% CVA 3% Bronchitis 3% Others 11%

• 한국산업보건학회지
• /
• 제30권2호
• /
• pp.153-162
• /
• 2020

Objectives: 3D printing technologies have become widely developed and are increasingly being used for a variety of purposes. Recently, the evaluation of 3D printing operations has been conducted through chamber test studies, and actual workplace studies have yet to be completed. Therefore, the objective of this study was to determine the emission of volatile organic compounds(VOCs), metals, and particles from printing operations at a workplace. This included monitoring conducted at a commercial 3D printing service workplace where the processes involved material extrusion, material jetting, binder jetting, vat photo polymerization, and powder bed fusion. Methods: Area samples were collected with using a Tenax TA tube for VOC emission and MCE filter for metals in the workplace. For particle monitoring, Mini Particle Samplers(MPS) were also placed in the printer, indoor work area, and outdoor area. The objective was to analyze and identify particles' size, morphology, and chemical composition using transmission electron microscopy with energy dispersive spectroscopy(TEM-EDS) in the workplace. Results: The monitoring revealed that the concentration of VOCs and metals generated during the 3D printing process was low. However, it also revealed that within the 3D printing area, the highest concentration of total volatile organic compounds(TVOC) was 4,164 ppb at the vat photopolymerization 3D printing workplace, and the lowest was 148 ppb at the material extrusion 3D printing workplace. For the metals monitoring, chromium, which, is carcinogenic for humans, was detected in the workplace. As a characteristic of the particles, nano-sized particles were also found during the monitoring, but most of them were agglomerated with large and small particles. Conclusions: Based on the monitoring conducted at the commercial 3D printing operation, the results revealed that the concentration of VOCs and metals in the workplace were within Korea's occupational exposure limits. However, due to the emission of nano-sized particles during 3D printing operations, it was recommended that the exposure to VOCs and metals in the workplace should be minimized out of concern for workers' health. It was also shown that the characteristics of particles emitted from 3D printing operations may spread widely within an indoor workplace.

• 한국산업보건학회지
• /
• 제30권2호
• /
• pp.109-123
• /
• 2020

Objectives: The aims of this study were to review the standards and key components of the standards for disposable masks in Korea, the US, EU, Japan, and China and to evaluate the appropriateness of disposable masks during a virus pandemic. Methods: We reviewed the standards in the above countries and compared their key elements for each standard. For the second purpose, systemic paper gathering using key words like 'mask', 'respirator' 'virus', and 'coronavirus' in the PubMed search engine was performed. Fifty-three papers were selected and reviewed in regard to the appropriateness of test protocols with sodium chloride(NaCl) particles for virus filtration and the effectiveness against viruses. Results: The standards for masks are largely divided into two categories: US standards and EU standards. In Korea, the Ministry of Employment and Labor adapted the EU standards for workers and the Health Masks adopted the Ministry of Employment and Labor standards by the Ministry of Food and Drug Safety. Regarding airborne viral infections, WHO emphasizes only droplet infection, while many studies have shown that small particles enter the air through coughing or sneezing, which increases the possibility of airborne infection. Compared to other particles, various factors such as airborne viability and the ability to replicate the virus in the body are further involved in the virus's airborne infection rate. Airborne infection is classified into absolute air infection, preferential air infection, and opportunistic air infection. The NaCl-certified N95 mask showed good filtration efficiency against viruses and NaCl particles were proved to be a surrogate material for viruses. From this, KF94 is also expected to be effective in blocking viruses. Conclusion: The N95 test method could be used as a surrogate test method for virus filtration. N95-class masks have been found to effectively block viral infections in the air. However, surgical or medical masks are only partially effective against airborne virus infection though they could effectively block large droplet infection. However, most studies considered in this study targeted N95 in foreign countries and studies on masks actually used in Korea are very limited, so studies on microorganisms and reuse on domestic masks should be conducted in the future.