• The Korean Journal of Food And Nutrition
• /
• v.31 no.5
• /
• pp.616-630
• /
• 2018

This study analyzed the current status of registered patents related to food tech in Korea and Japan. Using the patent information search services of Korean and Japanese Patent Offices, patents registered during the past 10 years from January 1, 2005 to December 31, 2015 were searched with the following key words/phrases: "food or meal or diet" and "program or information system". A total of 669 patents (539 for Korea and 130 for Japan) were finally selected and analyzed. Based on Porter's value chain theory, the patents were categorized into three dimensions related to "manufacturing/processing/distribution", "sales & marketing", and "consumer support". The results showed that in Korea, 41.7% of the total patents were related to sales & marketing followed by consumer support (37.3%) and manufacturing/processing/distribution (21.0%). In Japan, patents related to consumer support accounted for 56.2% followed by manufacturing/processing/distribution (32.3%), and sales & marketing (11.5%). In the area of manufacturing/processing/distribution, "food quality management system" in Korea, and "food manufacturing and processing management system" and "food safety control and hazard analysis system" in Japan tended to show a significantly higher proportion of patents registered (p<.05). Under sales & marketing, patents in the categories of "food purchase and delivery service system" in Korea and "restaurant information sharing system" in Japan tended to be more frequently registered (p<.05). Finally, in the area of consumer support, "kitchen facility and cooking device control system" in Korea and "menu and nutrition management system" in Japan tended to account for a significantly higher proportion of patents registered (p<.001). The results are expected to provide useful insights into the development of new patents and markets for food tech in the future.

• Applied Chemistry for Engineering
• /
• v.21 no.5
• /
• pp.553-558
• /
• 2010

To solve the problems of the low combustion activity of Korean anthracite and the abundant loss of unburned carbon in fly ash, pellet coal was fabricated from coal fines and fly ash, and the mixed combustion of coarse coal with the pellet coal was examined in the circulating fluidized bed combustor of a 0.1 MW scale test unit. In the combustion of the raw coal only, the significant amount of coal fines was entrained, resulting in overheat at the top of the combustor. With the coarse coal that most fines were eliminated, however, the combustion temperature was maintained stable. The mixed combustion of coarse and raw coals was also feasible even though it often went unstable. The mixed combustion of the coarse coal with the pellet coal was as stable as the coarse coal combustion, showing a promise that the combustion of the Korean anthracite in commercial circulating fluidized bed boilers could be further enhanced.

• Journal of Fashion Business
• /
• v.1 no.1
• /
• pp.27-42
• /
• 1997

The Korean fashion industry is composed of originality, technique and business management. It is going to be the main role in the living and cultural industry in 21th century as a strategic advanced industry. On the other hand, more than 15,000 persons who majored in correlated fashion are graduated from universities, colleges, and fashion schools every year. But professional and competent persons specialized in clothings are very insufficient. So cultivation of the talented for fashion industry must be suitablely and differentially carried out, according to regional distinction or characteristics of each university, college level, institute and so on. At same time, it is for the subdivided professional educations in fashion field, also. Education institutions related fashion have to practice not only theory but also field-oriented education of fashion industry. The fashion enterprise must invest resolutely in reeducations for incoming and reading employees, too. Briefing the program of cultivating the competent as follows : (1) The execution of certification programes based on professional job series. (2) Cultivation of the talent by cooperation of industry and educational field. (3) Upbringing the specialists who have both abilities of foreign language and living cultural profession. (4) Establishment of a base oriented north-east Asia as the central fashion business. (5) Efficient using of multi-media. (6) Innovation of technology. (7) Preferential treatment of skilled labors apparel industry field. (8) Establishment of the Korean Society of Fashion Business for a bridge of industrial-educational complex and government, for cultivation of the talent. The programs of 'cultivation of the talent' must be differed from to whom', 'what', 'how long'. But the commonness in all is to need the stimulative education and creativity. Through it, 'what and how think' and 'how application' to all directions is acquired.

• Journal of Technology Innovation
• /
• v.18 no.1
• /
• pp.99-121
• /
• 2010

The goal of this paper is to analyze the effects of various firm characteristics on the probability for a firm to receive government’s financial supports for R&D. In the empirical analysis, a Probit model is estimated for the 2008 Korea Innovation Survey data. The main contribution of the paper is to investigate the distribution of R&D supports at the national level, instead of the program level. Especially, it is the first academic effort to evaluate the effects of regional and industrial variables. The results show that: (1) firm size and export increase the probability of receiving government’s R&D support; (2) variables measuring firms’ innovative ability, such as official designation as innovative firm, running R&D institute, number of R&D personnel, also have significantly positive effects; (3) firms in the chemical and automobile industries are more likely to receive R&D supports; and (4) firms in Teakyoung and Bukyoung regions are more likely to receive R&D supports.

• Journal of the Korean GEO-environmental Society
• /
• v.2 no.2
• /
• pp.13-22
• /
• 2001

In this study, centrifuge model tests were fulfilled to investigate the characteristics of bearing capacity of paper ash as a filling material. The model tests were done varying the footing width and gravity level. The settlement and vertical soil pressure by loading were measured. The results from the tests were compared with the one from FLAC program using finite difference method and bearing capacity theory. After all, it was shown that the characteristics of load-settlement represented the local shear failure, which the settlement ratio s/B showed inflection point around 25~30%. As g-level and footing width were increasing, the load strength was increasing. The ultimate bearing capacity from the tests was very closed the results from Terzaghi's theory. As the distance from footing center was increasing, the vertical soil pressure was decreasing. If E/B is higher than 7, the stress by loading was almost increasing. The vertical displacement from loading was the largest one around under the footing and was almost occurred when the depth>4cm and E/B is higher than 5.0.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.6
• /
• pp.255-261
• /
• 2005

Recently, the RF inductive discharge or inductively coupled plasma continues to attract growing attention as an effective plasma source in many industrial applications, the best known of which are plasma processing and lighting technology. To the point of lighting sources, the ring-shaped electrodeless fluorescent lamps utilizing an inductively coupled plasma have been objects of interest and research during the last decades, mainly because of their potential for extremely long life, high lamp efficacies, rapid power switching response. In this paper, maxwell 3D finite element analysis program (Ansoft) was used to obtain electromagnetic properties associated with the coil and nearby structures. The electromagnetic emitting properties were presented by 3D simulation software operated at 250 kHz and some specific conditions. The electromagnetic field in the ferrite core was shown to be high and symmetric. An LS-100 luminance meter and a Darsa-2000 spectrum analyzer were used in the experiment. According to data on the lamp tested using high magnetic field ferrite, the optical and thermal wave fields were shown to be high around the ring-shaped electrodeless fluorescent lamp. The optical or light field was high at the center of the bulb rather than around the ferrite core. The light conditions of the bulb were assumed to be complex, depending on the condition of the filler gas, the volume of the bulb, and the frequency of the inverter. Our results have shown coupling between the gas plasma and the field of the light emitted to be nonlinear.

• Journal of Drive and Control
• /
• v.15 no.3
• /
• pp.21-28
• /
• 2018

We propose a tension controller based on a time-delay estimation (TDE) technique for a winding machine. Firstly, we perform the necessary calculations to derive a mathematical model of the winding machine. In this sense, it is revealed that the roll radius of the winding machine is characteristically seen to be increasing or decreasing during the winding process. That being said, it is noted that the parameters of the winding machine are coupled and constantly changing during this process. Understandably then, it is noted that the model is shown to be nonlinear and time-varying. Secondly, we propose the way to apply the TDE based controller which is the so-called Time-delay Control (TDC). The TDC utilizes the time-delayed information intentionally to compensate the nonlinear and time-varying characteristics. As we have seen, the proposed controller consists of two parts: one is a TDE component, and the other is an error dynamics component which is defined by a user. In a computer simulation based on the Matlab/Simulink program, the proposed controller is compared with a conventional PID controller, which is widely used in the tension control of the winding machine. The proposed controller reduces the incidence of overshoot and steady-state error in the tension control, as compared to the conventional PID controller.

• Journal of Convergence for Information Technology
• /
• v.10 no.7
• /
• pp.194-206
• /
• 2020

This study aims at creating a daily life satisfaction improvement plan by using motivation for seeking need for rehabilitation services and self-efficacy in individuals who returned-to-work and reemployed injured workers. The subjects of this study were 2,642 returnees and 3,742 reemployed individuals who participated in the first to fifth year survey of the first cohort of the Panel Survey of Workers' Compensation Insurance. The analysis checked the mediating effect through the multiple regression analysis and bootstrapping. The result indicated the need for rehabilitation services had negative impact on self-efficacy and daily life satisfaction whereas self-efficacy had a positive effect on daily life satisfaction and played a mediating role between the need for rehabilitation services and daily life satisfaction. Based on these results, a need for the advancement of social psychological rehabilitation program and establishing an integrative rehabilitation process were identified.

• Resources Recycling
• /
• v.15 no.6 s.74
• /
• pp.3-9
• /
• 2006

In this study, a machine vision system using a color recognition method has been designed and developed to automatically sort out specified materials from a mixture, especially Cu and other non-ferrous metal scraps from a mixture of iron scraps. The system consists of a CCD camera, light sources, a frame grabber, conveying devices and an air-nozzle ejector, and is program-controlled by a image processing algorithms. The ejectors designed to be operated by an I/O interface communication with a hardware controller. In the functional tests of the system, its efficiency in the separation of Cu scraps from its mixture with Fe ones reaches to 90% or more at a conveying speed of 15m/min, and thus the system is proven to be excellent in terms of the separating efficiency. Therefore, it is expected that the system can be commercialized in the industry of shredder makers if an automated sorting system of high speed is realized.

• Journal of the Korean Institute of Gas
• /
• v.18 no.5
• /
• pp.6-11
• /
• 2014

To optimize the design of fuel cylinder for LNG vehicles, we introduced the design parameters of the inner and the outer tank of the vessel support structure by analyzing the structural characteristics of conventional design. We selected the inner and outer diameter of the hollow support bars and a dimension of the inner structure of the vessel among the design parameters for design optimization. In this study the temperature distribution and thermal stress of the support structure were evaluated by using the utility program as MSC/MARC. The evaluation criteria are first mode natural frequency, total transferred energy through support structure and thermal stress. The developed design satisfied the design criteria and it was made of prototype. The prototype was verified through three-dimensional vibration testing and thermal performance test.