• Journal of Food Hygiene and Safety
• /
• v.20 no.2
• /
• pp.73-76
• /
• 2005

Center for Food Standard Evaluation, Korea Food and Drug AdministrationThis study was performed to compare analytical methods of nine synthetic food colors and six food color lakes in Korea, Japan, Joint FAO/WHO Expert Committee of Food Additives (JECFA), and USA. The experimental protocol of this study consists of three parts: titration method with titanium chloride, gravimetric and spectrophotometric method. To measure the total contents of food colors, Korea and Japan used titration method with titanium chloride, USA used the average value of titration method with titanium chloride equipped with Kipp generator and spectrophotometric method. Also, JECFA used titration method with titanium chloride equipped with KiPP generator. However, All the low organizations used gravimetric method to measure the total content of coloring matter on Food Red No.3. Although all organizations use various methods for analysis of coloring matters, total contents of coloring matter on food colors tested fell into the standard showing $85.08-96.40\%$ in synthetic food colors and $10.00-36.86\%$ in food color lakes.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.26 no.1
• /
• pp.41-46
• /
• 2013

The cladoceran Daphniamagna has been used as an aquatic test species in aquatic toxicology. To evaluate the aquatic toxicity of leachate from concrete, the immobilization of D. magna was observed after treatment of various concentrations of leachate specimens. Reliabilities of the culture condition and the experimental protocol for acute toxicity test were successfully achieved from the standard toxicity test. The leachates were prepared from the mixture of Ordinary Portland Cement (OPC) and pozzolanic admixtures, Pulverised fuel ash (PFA), Ground granulated blast furnace slag (GGBS) and GGBS containing loess. Acute toxicity test showed 100% immobilization of D. magna for OPC or PFA. The leachates from OPC or PFA had high pH 10 to 12. However, GGBS and GGBS containing loess showed less toxicity according to the concentrations. Especially, immobilization was not observed at the concentrations below 12.5% of GGBS containing loess. Also the range of pH for these specimens was 8 to 9. This suggested that the use of loess as the admixture in concrete may be useful to reduce eco-toxicity of leachates from concrete. This our study provided the harmfulness of the alkali leaching from concrete in aquatic environment and the usefulness of D. magna to evaluate the toxicity of leachates from concrete.

• Journal of Korea Multimedia Society
• /
• v.8 no.2
• /
• pp.279-286
• /
• 2005

As the mobile environment has been generalized, data synchronization with mobile devices or mobile device and PC/server is required. To deal with the problem, the consortium was established by the companies, such as Motorola, Ericsson, and Nokia, and released SyncML(Synchronization Markup Language) as a standard of industrial area for interoperating with data synchronization and various transmission protocol. But, in synchronization process, when more than two clients requested data synchronization, data conflict can be happened. This paper studies the various conflict reasons that can happen in data synchronization processes and groups them systematically Through the analyzed information, we compose the Change Log Information(CLI) that can keep track of the chased information about synchronization. And we suggest an operation policy using CLI. Finally, we design an algorithm and adapt the policy as a method for the safety and consistency of data.

• Korean Journal of Computational Design and Engineering
• /
• v.4 no.4
• /
• pp.339-349
• /
• 1999

The punose of this paper is to introduce the comprehensive CAM system (called PosCAM) supporting various function requested from shop floor operators. PosCAM is comported of two subsystems (PosCAM I and PosCAM II) which are designed to make up for the contemporary CAD/CAM systems. PosCAM I is mainly for : a) verifying the part programs written in both custom macros and standard G-codes, b) enhancing machining productivity and quality with built-in cutting conditions and feedrate optimization algorithm. PosCAM II is for : a) efficiently managing the numerous part programs and tool data stored in CNC memory, and b) integratively controlling and monitoring various CNCs from the control center through RS-422 with DNC 2 protocol. The developed systems have been tested via various experiments, and can be Applied for the industrial CNC machine shop as a means for enhancing productivity. The PosCAM system has been implemented and successfully used in the Machine Shop Department of PosCAM since march 1998.

• Applied Chemistry for Engineering
• /
• v.18 no.4
• /
• pp.371-375
• /
• 2007

This study measured the photocatalytic activities of five $TiO_2$ samples commercially available in terms of the degradation rate of nine organic substrates. Efforts were made to correlate the activities with the properties of both catalysts and substrates but little correlation was found. The result clearly shows that the photocatalytic activities sensitively depend on the kind of the test substrates, which strongly supports the fact that the activity measured with one or two model compounds cannot represent the overall performance of a photocatalyst. Therefore, this multi-aspect and inconsistent activity of photocatalytic reaction should be fully understood prior to establish the standard protocol for the activity determination.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.5
• /
• pp.811-818
• /
• 2016

This paper suggests a structure of power control system in floating wave-offshore wind hybrid power generation system. We have developed an unified SCADA(Supervisory Control and Data Acquisition) system which can be used to monitor and control PCS(Power Conversion System) based on IEC61850. The SCADA system is essential to perform the algorithm like proportional distribution and data acquisition, monitoring, active power, reactive power control in hybrid power generation system. IEC61850 is an international standard for electrical substation automation systems. It was made to compensate the limitations of the legacy industrial protocols such as Modbus. In order to test the proposed SCADA system and algorithm, we have developed the wind-wave simulator based Modbus. We have designed a protocol conversion device based on real-time Linux for the communication between Modbus and IEC61850. In this study, SCADA system consists of four 3MW class wind turbines and twenty-four 100kW class wave force generator.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05a
• /
• pp.108-112
• /
• 2010

Confocal Imaging System is an essential machine for a wide range of inspection wafer. For concurrent and fast acquiring the image data of four channels, the new image acquisition system used the protocol of camera-link standard with the full mode of configuration in interconnection with a frame grabber integrated in a computer, which is popularly used for many cameras, so the programming environment of image processing is optional such as Visual C++, Matlab. In addition, many conventional methods were coordinately used for contribution to build the high quality of images for precise processing analog signals of PhotoMutiplier Tubes(PMTs), accurate control of scanning device, sensitivity of PMTs, and laser source. The prototype of new image acquisition system, could meet the goal of development, it is used in LSCM for high content screening to investigation the processes of elements of living specimens at the same time by simultaneous grab image data on 4 PMTs channels.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.3
• /
• pp.159-166
• /
• 2018

This paper introduces a manufacturing facility visualization system for the monitoring of smart factories. With the development of technology and the emergence of such terms as the Fourth Industrial Revolution and Industry 4.0, technologies for smart factories are becoming more important. A Manufacturing Execution System that can improve productivity and help decision making by monitoring production plants in real-time is one of the key technologies for smart factories. The application of digital twin technology for more accurate monitoring technology is also an important issue. However, digital twin implementations require an integrated infrastructure that can integrate facility data from multiple manufacturers. Therefore, this paper designs and develops a visualization program that can verify real-time information of facilities using data collection system based on international standard protocol for heterogeneous collection and monitoring of facility data. This allows a factory to consolidate equipment data from multiple manufacturers and to view them in real-time.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.19-24
• /
• 2018

The IP Multimedia Subsystem(IMS) is an architectural framework for delivering IP multimedia services to mobile users. In order to guarantee the reliability and Quality of Service(QoS) of a variety of multimedia services, we need a new evolutionary approach that maintains the IMS based signaling platform which can perform the processing of flow through distributed controllers. Software Defined Network(SDN) is an architecture purporting to be distributed, dynamic, cost-effectives as well as adapting and seeking to be suitable for the high-bandwidth, dynamic nature of today's applications. It requires some methods for the control plane to communication with the data plane. One of such mechanisms is OpenFlow which is a prominent standard protocol and interface that is responsible for managing the network resources by using the remote SDN controller. In this paper, we propose a straightforward approach for integrating SDN technology together with the IMS architecture. Therefore we propose and construct a combined architecture model that performs flow processing using OpenFlow via the IMS based signaling platform, which maintains the existing telecom call service. Additionally, we describe some relevant experimentation results from the proposed architecture.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.7
• /
• pp.2559-2564
• /
• 2010

The indoor and outdoor lighting industry has become the bigger and more systemized using the semiconductor LED with each control R(Red), G(Green), B(Blue). The communication standard DMX512(ANSI E1.11) protocol of it can control and perform max. 512 lightings, especially 170 lightings in 24 bit true color. As the performance of below 100 lightings is distinguished small-size, this paper proposes a bigger capacity lighting performance above 1,000 using connection to 1 master to 32 slaves. Also, this paper proposes the synchronization method in order to accomplish a designed performance. In proposed method, the master sends the synchronization signal to slaves every 400ms. Slaves receive this signal and use to initialize the timer becoming the basis of DMX512 output. The example of the developed products using proposed method and the operation is introduced.