• 제목/요약/키워드: Industrial Port

검색결과 614건 처리시간 0.025초

고소성 해성점토지반의 압축지수에 대한 비교 연구 (A Comparison Study on Compression Index of Marine Clay with High-Plasticity)

  • 정길수;박병수;홍영길;유남재
    • 산업기술연구
    • /
    • 제25권A호
    • /
    • pp.57-65
    • /
    • 2005
  • In this paper, for the highly plastic marine soft clay distributed in west and southern coast of Korean peninsula of Kwangyang and Busan New Port areas, correlation between compression index and other indices representing geotechnical engineering properties such as liquid limit, void ratio and natural water content were analyzed. Appropriate empirical equations of being able to estimate the compressibility of clays in the specific areas were proposed and compared with other existing empirical ones. For analyses of the data and test results, data for marine clays were used from areas of the South Container Port of the Busan New Port, East Breakwater, Passenger Quay, Jungma Reclamation and Reclamation Containment in the 3rd stage in Kwangyang. In order to find the best regression model by using the commercially available software, MS EXCEL 2000, results obtained from the simple linear regression analysis, using the values of liquid limit, initial void ratio and natural water content as independent variables, were compared with the existing empirical equations. Multiple linear regression was also performed to find the best fit regression curves for compression index and other soil properties by combining those independent variables. On the other hands, another software of SPSS for non-linear regression was used to analyze the correlations between compression index and other soil properties.

  • PDF

RTLS기반의 풀링운영에서 실시간 YT 추적과 장치장 혼잡도 분석 (Real-Time YT Tracking and Analysis of Yard Congestion in Pooling Operation Based on RTLS)

  • 하창승;서문교
    • 한국산학기술학회논문지
    • /
    • 제11권7호
    • /
    • pp.2603-2609
    • /
    • 2010
  • 최근 항만에서는 이송장비의 운영 효율성 제고를 위해 운영방식의 개선에 관한 다양한 시도가 이루어지고 있다. 기존 조별운영 방식에서는 특정 안벽크레인에 지연이 발생하면 배정된 YT들도 함께 작업을 중단해야만 하는 문제가 생겼다. 이 문제를 해결하기 위해 본 연구에서는 운영 방식을 풀링운영 방식으로 전환하고 운영 효과를 높이기 위해 장치장 내에 무선 측위 장비를 설치하고 YT의 위치와 혼잡도를 측정하였다. 본 연구를 통해 풀링운영을 위한 YT의 이동을 실시간으로 추적할 수 있게 되었고 장치장의 혼잡도를 객관적으로 분석하고 평가하는 작업통제 방법이 마련되었다.

이중관 열교환기의 유체 유입위치와 회전길이에 따른 유동특성 (Flow Characteristic with Distance of Inlet Port and Rotating Length of Fluid in the Double Heat Exchanger)

  • 이승하;차동안;권오경
    • 동력기계공학회지
    • /
    • 제17권4호
    • /
    • pp.51-57
    • /
    • 2013
  • The length and position of the inlet port on the double tube heat exchanger is analyzed by CFX ver.11 for studying the characteristic of its flow distribution. When the boundary conditions of the inlet temperature and mass flow rate were each $20^{\circ}C$ and 10 ~ 50 kg/min, 3 models that are based on the distance between the inlet port and the center of the heat exchanger(0, 5.025, 10.05 mm) were analyzed to find the uniformity of the flow rate. Based on the flow rate, 4 lengths (23.723, 33.890, 44.057, 57.274 mm) were used to study the flow distribution according to Reynolds Number. The results show that, when the distance from the inlet to the position of the center of the heat exchanger is 10.05 mm and the length is 57.274 mm, the flow distribution is the most unified.

성능기반의 항만시설물 유지관리 의사결정체계 개발을 위한 데이터 연계방안 도출에 관한 연구 (A Study on the Development of the Data Linkage Method for Performance-based on Port Facility Maintenance Decision Marking System)

  • 김용희;강윤구
    • 한국산학기술학회논문지
    • /
    • 제21권11호
    • /
    • pp.9-18
    • /
    • 2020
  • 최근 항만시설물의 효율적인 관리·운영을 위하여 전 생애주기에 걸친 통합관리 플랫폼 및 성능기반의 유지관리 의사결정체계 개발에 관한 연구가 활발히 진행되고 있다. 본 연구의 목적은 시설물을 성능의 관점에서 관리·운영하여 시설물의 장수명화와 효율적인 예산집행을 추구하는데 있다. 이를 위해서는 통합 플랫폼과 의사결정체계에서 분석할 충분한 양의 기초 데이터의 확보가 필수적이다. 이에 본 연구는 통합플랫폼 및 의사결정체계 개발의 기초데이터로 필요한 항만시설물 설계 및 유지관리 정보를 확보하기 위하여 현재 해양수산부에서 운영 중인 항만시설물 유지관리시스템(POMS; Port Facility Management System)과의 데이터 연계방안을 도출하는데 목적이 있다. 이를 위하여 POMS의 데이터베이스를 분석하였으며 이 중 통합플랫폼과 의사결정체계를 운영하는데 필요한 데이터 항목을 선정하고 이를 관계 전문가의 요구사항과 함께 종합적으로 검토하여 3개 분야의 연계대상을 선정하였다. 연계대상 데이터는 크게 항만과 항만시설물 데이터, 유지관리 데이터, 사용자 데이터로 분류할 수 있다. 각 세부 연계 데이터별로 API 인터페이스 설계서를 작성하였고, POMS의 연계 데이터와 통합플랫폼의 데이터 연계 프레임워크를 정의하였다. POMS와 통합 플랫폼의 데이터 연계는 플랫폼 개발 이후, 운영단계에서 실효성 있는 데이터를 실시간으로 수시 제공받아 통합 플랫폼 운영의 효율성을 향상시킬 것으로 기대된다.

Analysis of Air Circulation in Oyster Mushroom Farm

  • Jeong, Won-Geun;Lim, Hack-Kyu;Kim, Tae-Han
    • Journal of Biosystems Engineering
    • /
    • 제37권2호
    • /
    • pp.75-81
    • /
    • 2012
  • Oyster mushroom farm which could not meet optimum temperature range yields non-uniform sized, low quality products. Thus, this study, utilizing STAR CCM+, one of the computational fluid dynamics (CFD) programs, analyzed the impact of air circulation and temperature distribution. Methods: After we visited numerous mushroom farms, we measured the temperature at the discharge ports of heaters, fan capacity, and the locations of the air circulators in the farms. According to the data, most mushroom growers installed the heaters near the entrance and discharge ports of the heaters at the third growing bed on the same height as the heaters in the entrance. The temperature at the discharge port of heater was $1,26^{\circ}C$, and the fan capacity was 4,500 $m^3$/hr. The air circulator was placed in the center of the mushroom farm 50cm above the ground, and its capacity of inlet port was 1,100 $m^3$/hr and discharge port 1,600 $m^3$/hr. The mushroom farm was insulated. Results: According to the analysis of the temperature distribution in the vertical plane of the entrance side, no air circulation causes the high temperature zone of 296~299K at the discharge port of the heater to take up 34% of area while the operation of air circulators causes it to occupy only 9%. This means that not using air circulators leads to a concentration of high temperature at the discharge port near the entrance. In addition, with the results of the analysis of the temperature distribution in the vertical planes of the center, no air circulation causes the temperature zone of 295~298K at the discharge port of the heater to take up 48% of area while the operation of air circulators causes it to occupy 80%. This shows that the high outlet port temperature disseminated to the center. Conclusions: After ninety minute operation of both heater and air circulator, the interior temperature became stabilized in the mushroom farm. Air circulation made the high temperature at the discharge port disseminate to the center and exit in the farm and equalize the temperature distribution.

다목적 가변 모형을 통한 제주지역 크루즈항구의 모항여건 분석에 관한연구 -한·중·일 주요항만비교를 통한- (Analytical Study on Home Port Conditions of Cruise Port in Jeju Area through Multi-purpose Variable Model -Through comparative analysis of main ports in Korea·China·Japan-)

  • 양정철;황경수
    • 한국산학기술학회논문지
    • /
    • 제18권2호
    • /
    • pp.243-253
    • /
    • 2017
  • 본 연구에서는 제주도, 상하이, 요코하마 크루즈 항만을 비교하여 제주도가 가지는 강점과 약점을 알아보는 것이다. 이를 위해 Cruise Network 분석 프로그램을 통하여 8개요인(공항, 선석, 비용, 거리, 시내접근성, 쇼핑시설, 소스마켓(배후시장), 관광)비교를 통하여 평가하였다. 세 개의 크루즈 항구를 비교하여 평가한 결과 제주도는 민군복합항을 완공하여 크루즈 2개선석(접안능력)을 확보하는 것만으로도 상하이 크루즈 항만보다 우위에 있을 수 있고, 신공항이 완성되면 요코하마 크루즈 항만보다 우위를 점할 수 있어 향후 동북아시아 최고의 크루즈 항만의 조건을 갖출 수 있을 것이라는 결과를 얻을 수 있었다. Cruise Network 분석 프로그램을 통하여 얻은 결과는 행정 정책이 뒷받침이 되어야 한다는 과제를 안고 있다. 이 연구가 크루즈 항만의 특성 및 배후지 평가를 위항 8개의 요인만을 가지고 각각의 지역을 평가하여 결과를 도출한 점은 평가 대상지지역의 다양하고 복잡한 여건을 충분히 종합하지 못한 한계를 가진다. 그리고 향후에는 크루즈 항만에 대한 평가요인을 세분화 하여 평가할 필요성이 있다. 또한 향후 연구에서는 크루즈 산업의 경제적인 효과와 융 복합 산업으로서의 관련 산업에 대한 연관성을 연구해 볼 필요성이 있을 것이다.

항만형 자유무역지역의 활성화를 위한 제도 개선에 관한 연구 (Ways to Improve Activation of Port-Type Free Trade Zones)

  • 박재규;조민지;김환성
    • 한국항해항만학회지
    • /
    • 제44권6호
    • /
    • pp.524-533
    • /
    • 2020
  • 자유무역지역제도는 1970년부터 제조업 중심으로 산업단지형 자유무역지역에서 시행되어 왔으며, 입주기업에게 조세 감면 및 규제 완화 등의 혜택을 제공함으로써 외국인 투자를 유치하고 무역물동량 증가를 창출하는데 큰 역할을 해 왔다. 그러나 산업단지형 자유무역지역의 외국인투자 유치실적이 현저히 떨어지고 있는 실정이다. 한편으로, 항만형 자유무역지역에서는 항만 물동량의 증가로 발전 가능성을 크게 내포하고 있어, 현재까지 제조업 중심으로 시행되어 온 자유무역지역제도의 발전 방향을 점검해 볼 필요가 있다. 본 논문에서는 자유무역지역의 역할과 운영 실태를 파악하고 이에 대한 문제점을 도출하고자 한다. 이를 위해, 항만형 자유무역지역에 특화된 비즈니스 모델을 분석하여 문제점을 파악하고, 물품보관을 목적으로 한 내국 물품의 관세영역으로 재반출에 대한 제도 개선방안을 제시하며, 간이 시뮬레이션을 통하여 개선방안에 대한 효과를 분석하였다. 본 연구에서 제시한 제도 개선으로 자유무역지역을 국제물류허브 및 글로벌배송센터로 이용하고자 하는 외국기업을 유치하는데 매우 중요한 요소로 작용할 것이다.

해상물동량과 항만의 처리능력 (Marine Freight Transportation and Cargo Handling Capacity of Ports)

  • 모수원
    • 한국항만경제학회지
    • /
    • 제19권2호
    • /
    • pp.55-67
    • /
    • 2003
  • The purpose of this study is to estimate and forecast the marine trading volumes based on the structural model. We employ GPH cointegration test since the structural model must be stationary to get the accurate predicted values. The empirical results show that our model is stationary. This paper also applies variance decompositions and impulse-response functions to the structural model composed of exchange rate, domestic industrial activity, and world business. The results indicate that while both loading and unloading volumes respond positively to the shocks in income and then decay very slowly, their responses are different to the shocks in exchange tate.

  • PDF

ITS 평가요인의 모델구축에 관한 연구 ( A Study for Model Establishment of Evaluation Factor on the Intelligent Transportation System ( ITS ) )

    • 한국항만학회지
    • /
    • 제12권1호
    • /
    • pp.47-53
    • /
    • 1998
  • Presently, it was faced with serious social problems as traffic accident, parking violation & traffic congestion due to change of industrial structure, expansion of economic volume, elevation of national life level and rapid motorization. Accordingly, the study is research to improve immidiate transportation problems which could be establish the rating model about consideration degree of evaluation factor based on MDPREF's method in connection with Intelligent Transportation System(ITS)

  • PDF

선용품 유통센터 입지선정에 관한 연구 (A Study on the Site Selection of Ship-Instrument Distribution Center)

  • 김웅섭;신재영
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2006년도 춘계학술대회 및 창립 30주년 심포지엄(논문집)
    • /
    • pp.411-415
    • /
    • 2006
  • 세계적인 항만환경의 변화는 매우 빠르게 변하고 있고, 항만들은 물동량을 선점하고 비즈니스 거점확보를 위한 경쟁을 가속화하고있다. 특히 급성장하고 있는 중국과 경제대국 일본 사이에서 우리나라가 21세기 동북아의 물류중심국가로 확고하게 자리잡기 위해서는 항만물류산업의 활성화가 매우 중요한 시점이다. 본 연구에서는 항만물류산업의 한 분야인 선용품 공급업을 대상으로, 업무실태와 문제점등을 살펴본 후, 선용품 유통센터 건립의 타당성을 도출하고자 한다. 또한, 향후 선용품 유통센터 설립을 위한 요인들을 조사하여 센터건립의 최적화 입지를 분석하고자 한다.

  • PDF