• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1576-1579
• /
• 1991

This paper discusses on the machine loading and tool allocation (MLTA) problem. Mathematical formulation of the problem is given first. Then a heuristic approach based on Group Technology (GT) is presented to deal with the MLTA problem effectively. By using this approach, part-tool group generation and their assignment to adequate machines can easily be obtained in consideration of the work load on each machine, the number of tool-set replacement, and the total number of cutting tools required through the interactive setting of the desired machine utilization rate.

• 산업경영시스템학회지
• /
• 제19권37호
• /
• pp.1-7
• /
• 1996

The grouping of parts into families and machines into cells poses an important problem for the improvement of productivity and quality in the design and planning of the flexible manufacturing system(FMS). This paper proposes a new algorithm of forming machine-part groups in case of the bottleneck machine problem and shows the numerical example. This algorithm could be applied to the large scale machine-part grouping problem.

• 산업경영시스템학회지
• /
• 제24권62호
• /
• pp.69-77
• /
• 2001

A current design trend of a vending machine is pursuing easy manufacturing and large capacity of holding cans. Therefore this study aims to ergonomically redesign vending machine and to analyze the motion of awkward posture to take out cans. Using Vision 3000 system, after investigating which motion can affect users, a new ergonomically designed vending machine, which was based on anthropometric data and guideline for control panel and exit of cans. New design shows a significantly improved usability and less stress. With new ergonomically designed vending machine at figure 3 can give a benefit for both users and manufactures.

• 산업경영시스템학회지
• /
• 제44권4호
• /
• pp.12-22
• /
• 2021

This article suggests the machine learning model, i.e., classifier, for predicting the production quality of free-machining 303-series stainless steel(STS303) small rolling wire rods according to the operating condition of the manufacturing process. For the development of the classifier, manufacturing data for 37 operating variables were collected from the manufacturing execution system(MES) of Company S, and the 12 types of derived variables were generated based on literature review and interviews with field experts. This research was performed with data preprocessing, exploratory data analysis, feature selection, machine learning modeling, and the evaluation of alternative models. In the preprocessing stage, missing values and outliers are removed, and oversampling using SMOTE(Synthetic oversampling technique) to resolve data imbalance. Features are selected by variable importance of LASSO(Least absolute shrinkage and selection operator) regression, extreme gradient boosting(XGBoost), and random forest models. Finally, logistic regression, support vector machine(SVM), random forest, and XGBoost are developed as a classifier to predict the adequate or defective products with new operating conditions. The optimal hyper-parameters for each model are investigated by the grid search and random search methods based on k-fold cross-validation. As a result of the experiment, XGBoost showed relatively high predictive performance compared to other models with an accuracy of 0.9929, specificity of 0.9372, F₁-score of 0.9963, and logarithmic loss of 0.0209. The classifier developed in this study is expected to improve productivity by enabling effective management of the manufacturing process for the STS303 small rolling wire rods.

• 산업공학
• /
• 제18권1호
• /
• pp.73-81
• /
• 2005

Injection molding has been widely used in producing plastic parts in large quantities. However, its productivity mainly depends on the expertise and experience of skilled workers because of the difficulty and complexity to determine a robust injection molding condition which is not influenced by the minor operational variation of an injection molding machine and produces good parts continuously. This study analyzes the defect types of the parts and proposes a support system to assist users in determining the robust process condition. The support system calculates the start condition from the information of an injection mold, the injection molding machine, the resin used, and the part. Through the iterative step which updates the condition using the defect information of the part tested, users can obtain the initial condition which produces the part without any problem for the first time. The support system also assists users in obtaining the robust condition from the initial condition using the technique of experimental design. To prove the validity of the support system, this study implements it in the control panel of the injection molding machine.

• 한국정밀공학회지
• /
• 제26권4호
• /
• pp.33-38
• /
• 2009

• 산업경영시스템학회지
• /
• 제47권1호
• /
• pp.20-27
• /
• 2024

Determining the number of operators who set up the machines in a human-machine system is crucial for maximizing the benefits of automated production machines. A man-machine chart is an effective tool for identifying bottlenecks, improving process efficiency, and determining the optimal number of machines per operator. However, traditional man-machine charts are lacking in accounting for idle times, such as interruptions caused by other material handling equipment. We present an adjusted man-machine chart that determines the number of machines per operator, incorporating idleness as a penalty term. The adjusted man-machine chart efficiently deploys and schedules operators for the hole machining process to enhance productivity, where operators have various idle times, such as break times and waiting times by forklifts or trailers. Further, we conduct a simulation validation of traditional and proposed charts under various operational environments of operators' fixed and flexible break times. The simulation results indicate that the adjusted man-machine chart is better suited for real-world work environments and significantly improves productivity.

• 한국생산제조학회지
• /
• 제22권3호
• /
• pp.349-355
• /
• 2013

Recently, there is an increasing need to produce more precise products with small deviations from defined target values. Machine capability is the ability of a machine tool to produce parts within a tolerance interval. Capability indices are a statistical way of describing how well a product is machined compared to defined target values and tolerances. Today, there is no standardized way to acquire a machine capability value. This paper describes a method for evaluating machine capability indices in machining centers. After the machining of specimens, the straightness, roundness, and positioning accuracy were measured by using CMM (coordinate measuring machine). These measured values and defined tolerances were used to evaluate the machine capability indices. It will be useful for the industry to have standardized ways to choose and calculate machine capability indices.

• 대한산업공학회지
• /
• 제20권2호
• /
• pp.3-17
• /
• 1994

This paper presents an EMQ model which determines an optimal manufacturing lot size in an unreliable machine. The machine has an exponentially distributed life time, and requires a constant time to repair when it fails. We 1) derive an average cost function, 2) obtain an optimal lot size and show that it is unique, 3) carry out sensitivity analysis to examine the effect of machine parameters (life time, time to repair) to optimal lot size.

• 산업경영시스템학회지
• /
• 제18권34호
• /
• pp.123-128
• /
• 1995

The grouping of parts into families and machines into cells poses an important problem in the design and planning of the flexible manufacturing system(FMS). This paper proposes a new optimal algorithm of forming machine-part groups to maximize the similarity, based on branching from seed machine and bounding on a completed part. This algorithm is illustrated with numerical example. This algorithm could be applied to the generalized machine-part grouping problem.