• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.531-542
• /
• 2017

The structural safety of small craft, such as steel ships and FRP ships, can be estimated using the measurement test of the hull plate thickness or the longitudinal bending strength test. A polyethylene boat is made using inexpensive HDPE and can be mass produced. The structural safety of a polyethylene boat cannot be guaranteed because a polyethylene boat hull is notspecified in the KR technical rules. The inspection procedure of sailing yachts and pleasure boats and drop test method of ISO standard 12215-5 propose the structural strength required for small crafts as the drop test height. Therefore, in this study, the drop test of a polyethylene boat hull was carried out based on the inspection procedure of a sailing yacht and pleasure boat and the drop test method of ISO standard 12215-5. The drop load was acquired by the drop acceleration ofa boat hull. Structural analysis and safety of a polyethylene boat were performed by the drop load and allowable stress criteria. The calculation results of the hull plate thickness by structural design specification of ISO standard 12215-5 showed that polyethylene boat hull was more than two times thicker than a steel ship hull and the boat hull determined by the inspection procedure of sailing yacht and pleasure boat and drop test method of ISO standard 12215-5 was more than 1.2 times thicker than the boat hull determined by structural design specification of ISO standard 12215-5. Therefore, inspection procedure of sailing yachts and pleasure boats and drop test method of ISO standard 12215-5 was much more conservative than the structural design specification of ISO standard 12215-5 and could be used as the structural design method of a polyethylene boat.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.273-282
• /
• 2016

This study analyzed the origin and status of the registration system of water leisure craft to suggest an improvement plan for the ocean leisure industry. To identify the transition of the registration system, related water leisure craft, registration procedures and revised acts from "water leisure safety act", which was established in the early 2000 and enacted since then were examined. To understand the problems raised, the management of the registration system and related other systems were analyzed. The results were as follows. First, the registration system was designed just to check the number of registrations of water leisure craft so it does not provide various and useful information that administrators and registrants want. Second, it is impossible to utilize and reconstruct the information regarding water leisure craft. In addition, the current registration system does not have a data sharing system with the Ministry of Government Administration and Home Affairs so self-governing administrations are not connected to each other or to other electronic government systems. To resolve these problems, the construction of a new registration system is required. The new registration system of water leisure craft should facilitate not only processing registration files and administration work, but also multiple electronic governmental services that provide the water leisure users with useful information and encourage them to learn about their craft management and so on.

• The Journal of Korean society of community based occupational therapy
• /
• v.1 no.1
• /
• pp.79-89
• /
• 2011

The number of the disabled person had been increased for the industrial accident and the environmental pollution. Especially, developmental disability has the high prevalence rate between 5% and 10% of the whole children. The children with a developmental disability can be treated by the physical therapy, the occupational therapy, the psychology therapy, speech therapy, and art therapy. Visual preception which is function to recognize the external environment through the optic organ could be related to most behaviors on the everyday life. But because the children with disability could not develop the visual-preception enough, they came to have difficulties in executing daily life project. For this reason, it is most important to understand the estimation and the cure on the visual-preception in the pediatric occupational therapy. To improve the visual-preception power, we have many kind of methods including sensory integration, training program for the visual-perception and art-craft program. Particularly, the art-craft which is the representative activity for making something by hands, can be applied to anyone. As the study on the brain has been activated, it was proved that handicraft actives could have an good effect on the brain function and using brain. When the fine motor exercise and more delicate and accurate motion were carried, these motions need the essential help of the visual-perception. So it could be expected that using the repetitive hand function by art-craft makes the brain function improve, when a activity that needs a fine motor exercise and more delicate, accurate motion was carried, It also indicates that the art-craft program has a clear treatment value. Though the intervention between visual-perception development and visual-perception disability have a majority in the field of occupational therapy, there is a few study yet. Therefore, this study tried to look back on the necessity of applying the art-craft program to the children with disability as the prestudy for preliminary validity of the master's thesis.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.3
• /
• pp.38-55
• /
• 2019

The purpose of this study is to clarify the historical flow of baekdong alloy's usage according to the alloying materials mentioned in document records. For this purpose, we first overviewed the use of copper as a base material for white copper alloys and other types of copper alloys. Baekdong is an alloy of copper and other metals and is currently defined as an alloy of copper and nickel. However, depending on the research subjects and time of the scholars, baekdong may be defined as a metal with over a certain percentage of tin added to copper, or as an alloy of tin, zinc, and lead with copper. There is disagreement regarding the interpretation of this term. Baekdong, which started to appear in the literature of the Three Kingdoms Period, has been steadily seen through the Goryeo and Chosun Dynasties to the modern period. It has been used in various ways, according to each age and culture, from the symbol of the office to trading goods, daily life goods, and money. In the literature, baekdong's alloying material is not only copper and nickel, which are currently defined as alloys, but it is the same in that copper is used as the base metal of the alloy, although it varies slightly from generation to generation. In addition to copper, tin, zeolite, and emerald, zinc and lead also appeared. It was found that baekdong, which means alloy, and baekdong, which means white metal, were mixed. Nickel, which is the alloy material of baekdong as it is currently defined, is a metal with a relatively high discovery time and is widely used as a material for modern industrial fields. Nickel was introduced into Korea at the end of the Joseon Dynasty, but its use is not known in detail. In this study, we examined the acceptance and use of nickel-based baekdong in articles of modern newspapers and in statistical data. Based on the experience of craftsmen, we estimated the period when nickel-based alloys were used in crafts. Material is a direct factor in the development and deterioration of technology, and the development of technology is the basis for the changing of civilizations and cultures. In this context, this study was to investigate baekdong with the material of alloys as a starting point.

• Journal of Digital Convergence
• /
• v.15 no.11
• /
• pp.455-461
• /
• 2017

This study aims to clarify how the graffiti arts used in urban regeneration projects have come to possess the place specificity as public arts. For the research, the theoretical background of the place specificity of graffiti art was explored with the understanding of the concept of place specificity of public art, before comparing the difference of graffiti arts as public art applied to the urban regeneration projects, depending on their installation location and artist. In addition, the specificity of the place where graffiti artwork was installed and its significance in the context of urban regeneration project were explored. The case study is limited to graffiti arts installed in Bosan-dong, Dongducheon-si, where several urban regeneration projects have been pushed for since 2015. It was found from the analysis that the place specificity of individual art works is maximized when they are merged with cultural contents reflecting the history and place specificity of target cities, such as design, crafts, music and festivals, rather than with the place specificity of the works of individual artists. The result of this study suggests that when graffiti arts are fused with urban cultural contents as fusion design elements, their place specificity is maximized enough to elevate them to the level of public arts, and enable them to function as the media of urban regeneration.

• Archives of design research
• /
• v.13
• /
• pp.165-172
• /
• 1996

The National College of Art. Craft and Design of Sweden founded in 1811 is one of the oldest schools in the world and has taken very important role in the development of Scandinavian design This college usually called "Konstfack" in Sweden was transformed under the influence of Bauhaus into a modern design institute and the experiment:li curriculum and its unique teaching system was completed in the middle of 70' s The phrase "Insight och Flit" in the emblem of this school shows the Konslfack spirit which stresses the creative insight and endless diligence Korea is much different from Sweden in cultural aspects as well as in political and economic ones. In the later half of 19th century Sweden was one of the undeveloped countries in Europe and she just entered the Industrial Hevolution. Swedish culture at the time was also the barbarian one in comparison with English and Frech cultures. Even she had the difficulty in founding her own cultural identity So the Swedish intellectuals in early 20th century tried to find out "What is Swedish\ulcorner" and as the result they produced the Swedish Modern Movement style in 1950's. In this process Konstfack as well as the Swedish Society of Crafts and Design and the Svensk Form. the design magazine. has played the leading role. To look over the history and educational system of this school will be helpful for our design education. will be helpful for our design education.

• Journal of Digital Convergence
• /
• v.19 no.9
• /
• pp.283-288
• /
• 2021

Due to the 4th Industrial Revolution and the Digital Revolution, many changes are being made in the manufacturing method and structure in the field of plastic arts and crafts. Therefore, in this study, we tried to present a new work method suitable for this era by effectively utilizing the digital technology called 3D printer. For this study, first of all, the theoretical background of 3D printing technology was understood, and prior studies on the use cases of 3D printing technology were summarized. Based on this, three types of craft molds were produced using a 3D printer. As a result of the study, there were characteristics that appear respectively depending on the thickness or overlapping of the craft molds using 3D printing technology. First, in the case of the thickness of the craft molds, the thinner the strength, the weaker the strength, but there was an advantage in that it was easier to take out the contents of the molds. However, it was determined that the thick craft molds was stable to contain the dense and heavy material. Second, in the case of overlapping of craft molds, the advantages of both thin and thick molds were obtained as a result of using a double-layered molds. However, there was a disadvantage that the surface of the contents taken out was not smooth, so that post-processing was necessary. In future research, I hope to deal with the material of the filament used in 3D printers.