• Journal of Power Electronics
• /
• 제5권4호
• /
• pp.329-334
• /
• 2005

The DSTATCOM(Distribution Static Synchronous Compensator) is one of the Custom Power Devices that can regulate voltage. The DSTATCOM operates as a shunt connected static var compensator whose capacitive or inductive output current can be controlled independent of the system voltage. The magnitude of the compensated voltage is limited by characteristics of the system and the load. Compensation capability of the DSTATCOM which can inject 1 MVAR reactive power was simulated by EMTDC under several conditions. This paper analyzes the effect of the DSTATCOM's compensation considering the length and kind of distribution line, the power factor and magnitude of the load, and the duration and magnitude of the voltage variation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.465-466
• /
• 2007

In electrode-less lamp, The key point in creating an efficient light source based on RF discharge is to minimize the RF power loss in the RF coupler which for Anderson's type of RF lamp is due to losses in the ferrite core. This loss depends on the particular ferrite material, its size, geometry, frequency in this kind of inductive lamp shows that the correct choice of discharge current has a crucial effect on the core loss. In this study, we measured Ferrite temperature in normal state, then analyzed electrical and optical characteristics according to ferrite shape. We were able to know that was ferrite of the antenna had relate closely with temperature and luminous of the lamp. Also we appraised temperature and electrical, optical properties during turn on the lamp.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.453-453
• /
• 2007

Electrodeless fluorescent lamp exhibit two modes of operation: a low density mode in which the power is capacitively coupled to the plasma and which is known as the E-mode, and a higher density mode which is an inductive discharge known as the H-mode. The transition between these two(E to H) mode exhibits hysteresis. It is observed that transition currents change at different frequencies and hysteresis exists not only between the starting and minimum maintaining currents of the electromagnetic mode (H mode) discharge but also between the starting and minimum maintaining currents of the electrostatic mode (E mode) discharge. Hysteresis effect can be important role in dimming system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1560-1561
• /
• 2007

Electrodeless fluorescent lamp exhibit two modes of operation : a low density mode in which the power is capacitively coupled to the plasma and which is known as the E-mode, and a higher density mode which is an inductive discharge known as the H-mode. The transition between these two(E to H) mode exhibits hysteresis. It is observed that transition currents change at different frequencies and hysteresis exists not only between the starting and minimum maintaining currents of the electromagnetic mode (H mode) discharge but also between the starting and minimum maintaining currents of the electrostatic mode (E mode) discharge. Hysteresis effect can be important role in dimming system.

• Bulletin of the Korean Chemical Society
• /
• 제18권6호
• /
• pp.657-662
• /
• 1997

Gas-phase phenyl group migration within the protonated ketones has been studied MO theoretically using the AM1 method. The initial state structure shows relatively strong resonance delocalization of positive charge into the nonmigrating (Y) ring, while the ring migration (Z-ring) is nearly complete in the transition state. These results are reflected in the large $p^+_Z$ (<0) and $p^+_$Y (>0) values and in the predominant contribution of resonance (r) over inductive (field, f) effect, r/f ranging from 1.3 ($p^+_r$) to 1.5 ($p^+_z$). The cross-interaction constant $p_{YZ}$ is vanishingly small ($p_{YZ}$=0.03) which is in contrast to the larger magnitudes for benzilic ($p_{YZ}$=-0.48) and azibenzil ($p_{YZ}$=-0.53) rearrangement processes. The relationship found between the extent of resonance contribution in the initial state and the magnitude of $p_{YZ}$ provides strong support for the proportionality between the magnitude of $p_{YZ}$ and the change in the intensity of interaction, ${\Delta}I^{\cdot}_{YZ}$, in the activation process.

• 농업과학연구
• /
• 제11권1호
• /
• pp.176-181
• /
• 1984

살충성 O,O-diethylphenylphosphate (A)와 3,5-dimethylphenyl-O,O-diethylphosphate 유도체 (B)에 의한 acetylcholinesterase(Ach E)의 phosphorylation 반응에 미치는 정량적인 자유에너지 관계(LFER)를 알아보기 위하여 Ach E의 두 작용점인 esteratic-anionic site에 대응하는 (A) 및 (B)의 P원자 및 meta 위치간의 공간직선 거리 및 알짜전하를 확장 H$\ddot{u}$ckel이론(EHT)에 의한 MO 계산 방법으로 계산하고 여러 가지 치환기상수와 $pI_{50}$ 상수를 Hammett 및 Okamoto-Brown식, Taft와 Swaln-Lupton의 DSP식에 적용한 회귀분석 결과로부터 살충작용에 미치는 정량적인 자유에너지 관계, %R과 %F를 계산하여 검토하였다. 즉, (A) 및 (B)의 살충효과는 서로 비슷하였으며 blending coefficient (${\lambda}$)는 모두 ${\lambda}$<1의 값을 나타내었다. (A) 및 (B)의 resonance effect (%R)와 field effect (%F)는 각각 %R=33.5, %F=66.5 그리고 %R=2, %F=98로 각각 계산되었는데(B)와 같이 phenyl group에 bulky한 소수성의 methyl group이 결합될수록 resonance effect($R_{\pi}$)보다는 direct through space field effect ($F_D$)가 아닌 through space field effect가 더 크게 영향을 미치게 된다는 사실을 알 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1394-1397
• /
• 1995

In the hazardous areas where explosive gases, vapor or mists exist, electrical apparatus and installations must be of explosion-proof construction to prevent or limit the danger of the ignition of potentially explosive atmosphere. In Korea, nine types of protection have been specified in the government regulations at present: flameproof enclosure, pressurization, oil immersion, increased safety, intrinsic safety, non-incendive, sand filling, encapsulation, and special types. Among these types, the intrinsic safety has the construction which limit or by-pass igniting the electric energy using electronic devices. This type has lots of merits but at the same time requires a high-degree of technology. In this paper, we investigated several dominating factors which affect the minimum ignition energy: this energy plays a very important role in design and evaluation of the intrinsic safety type electrical apparatus. Eletrode material, which is one of the most important factors, was intensively studied for the five sorts of material(Al, Cd, Mg, Sn, and Zn) with performing experiment in a low-voltage inductive circuit using IEC-type spark apparatus. The experimental results show that the minimum ignition energy of electrode material is varied: highest in Cd and lowest in Sn. We also confirmed the effect of eletrode make-and-break speed and magnetic field magnitude.

• Bulletin of the Korean Chemical Society
• /
• 제31권2호
• /
• pp.331-334
• /
• 2010

In the present study, carbon supports mixed with purified multi-walled carbon nanotubes (MWNTs) and carbon blacks (CBs) were used to improve the cell performance of direct methanol fuel cells (DMFCs). Additionally, the effect of $O_2$ plasma treatment on CBs/MWNTs supports was investigated for different plasma RF powers of 100, 200, and 300 W. The surface and structural properties of the CBs/MWNTs supports were characterized by FT-IR, X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and inductive coupled plasma-mass spectrometer (ICP-MS). The electrocatalytic activity of PtRu/CBs/MWNTs catalysts was investigated by cyclic voltammetry measurement. In the experimental results, the oxygen functional groups of the supports were increased with increasing plasma RF power, while the average Pt particle size was decreased owing to the improvement of dispersibility of the catalysts. The electrochemical activity of the catalysts for methanol oxidation was gradually improved by the larger available active surface area, itself due to the introduction of oxygen functional groups. Consequently, it was found that $O_2$ plasma treatments could influence the surface properties of the carbon supports, resulting in enhanced electrocatalytic activity of the catalysts for DMFCs.

• Journal of Power Electronics
• /
• 제18권4호
• /
• pp.1268-1277
• /
• 2018

A relatively high operating frequency is required for efficient wireless power transfer (WPT). However, the alternating current (AC) resistance of coils increases sharply with operating frequency, which possibly degrades overall efficiency. Hence, the evaluation of coil AC resistance is critical in selecting operating frequency to achieve good efficiency. For a Litz wire coil, AC resistance is attributed to the magnetic field, which leads to the skin effect, the proximity effect, and the corresponding conductive resistance and inductive resistance in the coil. A numerical calculation method based on the Biot-Savart law is proposed to calculate magnetic field strength over strands in Litz wire planar spiral coils to evaluate their AC resistance. An optimized frequency can be found to achieve the maximum efficiency of a WPT system based on the predicted resistance. Sample coils are manufactured to verify the resistance analysis method. A prototype WPT system is set up to conduct the experiments. The experiments show that the proposed method can accurately predict the AC resistance of Litz wire planar spiral coils and the optimized operating frequency for maximum efficiency.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2003년도 하계학술연구발표회 및 한.일 공동심포지엄
• /
• pp.260-261
• /
• 2003

It is recognized that the magnetization reverses with a sequence of discrete and jerky jumps, known as the Barkhausen effect. Recently, interest in the Barkhausen effect has grown as it is a good example of dynamical critical behavior, evidenced by experimental observation of a power law distribution of the Barkhausen jump size. So far, most experimental studies have been carried out on bulk samples using a classical inductive technique, which is difficult to apply to thin film samples mainly due to the ]ow signal intensity. For this reason, very few experiments have been done on two-dimensional ferromagnetic thin films. In this talk, we report a direct domain observation of Barkhausen avalanche at criticality in Co and MnAs thin films investigated by means of a magnetooptical microscope magnetometer (MOMM), capable of time-resolved domain observation with an image grabbing rate of 30 frames/s in real time. In Fig. 1, we demonstrate a series of six representative domain-evolution patterns of 25-nm Co film observed successively by means of the MOMM, where one can directly witness Barkhausen avalanche.