• 한국자기학회지
• /
• 제6권5호
• /
• pp.287-293
• /
• 1996

농형유도전동기의 회전자는 제조 과정중에 회전자 도체의 단선, 기포 발생으로 인한 회전자 도체의 저항 증가, 스큐 불량 등 여러 가지 고장이 발생될 수 있다. 이와 같은 고장은 유도전동기의 성능을 저하시키므로 회전자를 조립하기 전에 고장 유무를판단하면 조립에 드는 제조 비용을 절약할 수 있고 전동기의 신뢰성을 높일 수 있다. 본 논문에서는 이와같은 고장을 진단하는 방법의 하나로 유한요소법을 이용하여 회전자가 회전할 때 발생하는 전자석 코일에서의 유도 전류 파형을 검출하여 고장을 진단하는 방법을 제안하였다. 제안한 방법의 타당성을 검층하기 위하여 5 Hp 삼상 농형유도전동기에 대해 고장전류를 검출하고 이를 해석 결과와 비교 분석하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.972-974
• /
• 2000

In this paper, we describe the starting and synchronizing methods in the linear induction synchronous motor. The proposed motor consists of one pair of linear synchronous motors (LSMs) and an additional linear induction motor (LIM). The primary cores have a common ring winding, and solid conductors are arranged in both LIM and LSM. From the investigation by analysis and experiment, we verify that the proposed motor is effective for practical use.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.65-67
• /
• 1995

The squirrel cage rotors for induction motors may have several faults such as broken bars, bad spots in end ring, abnormal skew caused by improper processing. These faults have bad effect on the performance of the induction motor. This paper proposes the detecting technique of these faults by analyzing the current of the detecting electric magnet, using 2-D finite element method taking account of the rotor movement.

• Journal of Magnetics
• /
• 제18권3호
• /
• pp.255-259
• /
• 2013

In this paper a new coupling method for efficient and simple analysis of single phase induction motor is presented. The circuit representation of both the stator winding and each conducting rotor loop (composed of rotor bar and end ring segment) is used in conjunction with the distribution of magnetic flux linkage instead of inductance matrix. The flux linkage is calculated using air-gap flux density distributions driven by unit currents in the stator windings and rotor bars. The field distribution of one turn of a coil is calculated by FEM and the result is used to calculate total flux linkage by employing a coordinate transformation. The numerical results give good agreement with prior literature. The method is particularly effective in analyzing the effect of the number of rotor bars.

• 열처리공학회지
• /
• 제11권4호
• /
• pp.241-246
• /
• 1998

It is well known for 410L ferritic stainless steel powder to applicate a sensor ring in anti-lock brake system of automobile, several studies, because of its excellent magnetic properties. This study was carried out to investigate the magnetic properties such as the maximum magnetic induction, coercivity and maximum permeability of the materials with functions of sintering density, time and temperature, and concluded as follows: 1. Sintering under the circumstances of Ar gas and the temperature of $1250^{\circ}C$ for 60min, showed that nitrogen was increased, whereas carbon and oxygen decreased in quantities. 2. Both maximum magnetic induction value of 4700Gauss and permeability of 200 were obtained at the maximum sintering density of $6.89g/cm^2$. Here, the properties showed a linear increasement with increasing the sintering density. 3. Coercivity sharply decreased with incresing the sintering density and reached to 7.6Oe at the maximum sintering density of $6.89g/cm^2$.

• 약학회지
• /
• 제45권1호
• /
• pp.78-84
• /
• 2001

Heme oxygenase is a rate-limiting enzyme in heme catabolism that cleaves heme to form biliverdin, iron, and carbon monoxide. Heme oxygenase-1 is expressed in many types of cells and tissues and is highly induced in response to oxidative stress. Carbon monoxide, one of the products of heme oxygenase, can stimulate soluble guanylate cyclase and dilate the vascular smooth muscle. So, the induction of heme oxygenase by lipopolysaccharide (LPS)-induced oxydative stress and the effect of the resultant carbon monoxide on aortic contractility were examined in this study. Zinc protoporphyrine IX (ZnPP), a inhibitor of heme oxygenase, elicited weak contraction of thoracic aortic ring, and this effect was more potent in aorta of LPS-treated rats than control and was blocked by methylene blue. The hyperreactivity to ZnPP in LPS-treated group was blocked by co-treatment with aminoguanidine. In the aortic ring of LPS-treated rats, ZnPP didn't change the vasoreactivity to phenylephrine or acetylcholine. ZnPP elicited hyper-tensive effect in concious rats, and pretreatment with LPS did not affect this effect. Prazosin significantly diminished the hypertensive effect of ZnPP. These results indicate that LPS induced heme oxygenase in aotra, and the resultant carbon monoxide diminished the aortic reactivity to vasoconstrictor.

• 열처리공학회지
• /
• 제10권3호
• /
• pp.165-171
• /
• 1997

Laser hardening for the piston ring groove of ductile cast iron was tried. Mechanical and microstructural investigation for the hardened area indicated that the laser heating technique could replace conventional induction hardening process completely and further showed that post grinding process would be eliminated by minimizing bulging of heat treated area. In laser hardening, the volume increase caused by martensitic phase transformation proved to be less than $10{\mu}m$, which insures no post machining on the hardened surface. As expected, the depth of hardening was inversely proportional to the beam scanning velocity and the highest surface hardness was obtained at the beam velocity of 0.75m/min. Heat treatment using phosphate coating demonstrated quite comparable result to the case of graphite suscepter.

• 한국전기전자재료학회논문지
• /
• 제23권12호
• /
• pp.988-995
• /
• 2010

In this study the (Alnico, Sm-Co) bonded magnets were fabricated by mixing the Sm-Co added alnico alloy powders with epoxy resin and binder, appropriately. Also, the hybrid ring magnets of (Alnico, Sm-Co)/Sr-ferrite were fabricated by coupling the Sr-ferrite composite layer with an (Alnico, Sm-Co) magnet. The magnetic properties of (Alnico, Sm-Co) ring magnets were varied with the amount of Sm-Co powders. The addition of Sm-Co powders increased a remanent induction($B_r$) and coercive force($_BH_C$), while decreasing a surface flux density and repulsive distance. The surface flux density and repulsive distance for the (Alnico, Sm-Co) ring magnet increased with a magnetizing voltage up to about 160 V and reached an apparent saturation point. Also, the measurements of temperature and moisture characteristics showed that the surface flux densities of N-S poles and repulsive distance decreased a little within 4% after 10 days passed.

• Archives of Pharmacal Research
• /
• 제27권9호
• /
• pp.937-943
• /
• 2004

Recent investigations have shown that certain flavonoids, especially flavone derivatives, inhibit nitric oxide (NO) production by inducible NO synthase (iNOS) in macrophages, which contrib-ute their anti-inflammatory action. For the purpose of finding the optimized chemical structures of flavonoids that inhibit NO production, various A- and B-ring substituted flavones were syn-thesized and evaluated for their inhibitory activity using lipopolysaccharide-treated RAW 264.7 cells. It was found that the optimal chemical structures were A-ring 5,7-dihydroxyflavones hav-ing the B-ring 2＇,3＇-dihydroxy or 3＇,4＇-dihydroxy or 3＇,4＇-hydroxy/methoxy (methoxy/hydroxy) groups. These structurally optimized compounds were revealed to be down-regulators of iNOS induction, but not direct iNOS inhibitors. Of these derivatives that were evaluated, 2＇,3＇,5,7-tet-rahydroxyflavone and 3＇,4＇,5,7-tetrahydroxyflavone (Iuteolin) showed the strongest inhibition. The $IC_{50}$/ values for these compounds were 19.7 and 17.1 11M, respectively. Therefore, these compounds may have a potential as new anti-inflammatory agents.

• International Journal of Fluid Machinery and Systems
• /
• 제4권1호
• /
• pp.57-66
• /
• 2011

Radial-vaned air separators show a strong stall suppression effect in an axial flow fans. From a survey of existing literature on the effects and the author's data, a possible mechanism for the significant effects has been proposed here. The stall suppression is suggested to have been achieved by a combination of the following several effects; (1) suction of blade and casing boundary layers and elimination of embryos of stall, (2) separation and straightening of reversed swirling flow from the main flow, (3) induction of the fan main flow toward the casing wall and enhancement of the outward inclination of meridional streamlines across the rotor blade row, thus keeping the Euler head increase in the decrease in fan flow rate, and (4) reinforcement of axi-symmetric structure of the main flow. These phenomena have been induced and enhanced by a stable vortex-ring encasing the blade tips and the air separator. These integrated effects appear to have caused the great stall suppression effect that would have been impossible by other types of stall prevention devices. Thus the author would like to name the device "tip-vortex-ring assisted stall suppression device".