• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.14 no.6
• /
• pp.262-266
• /
• 2004

Rutile single crystals were grown by the skull melting method. Ti metal ring was used for initial RF induction heating. The grown crystals were cut into wafer of 5.5 mm diameter and 1mm thickness. The wafers were annealed in air at $1300^{\circ}C$ up to 15 hours and their transmittance spectra $(\lambda= 200~25000 nm)$ were obtained.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1998.11a
• /
• pp.29-39
• /
• 1998

It is well known for 410L ferritic stainless steel powder to applicate a sensor ring in anti-lock brake system of automobile, several studies, because of its excellent magnetic properties. This study was carried out In investigate the magnetic properties such as the maximum magnetic induction, coercivity and maximum permeability of the materials with functions of sintering density! time and temperature, and concluded as follows； 1. Sintering under the circumstances of hydrogen gas and tile temperature of $1250^{\circ}C$ for 60min. showed that nitrogen was increased, whereas carbon and oxygen decreased in quantities. 2. Both maximum magnetic induction value of 4700Gauss and permeability of 200 were obtained at the maximum sintering density of 6.89g/$cm^3$. Here, the properties showed a linear increasement with increasing the sintering density. 3. Coercivity sharply increased with incresing the sintering density and reached to 7.6Oe at the maximum sintering density of 6.89g/$cm^3$.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.68 no.5
• /
• pp.656-661
• /
• 2019

Currently, the devices to generate ion winds in air are mainly composed of corona electrodes and induction(ground) electrodes, of which the corona electrodes mainly use needles or wires as electrodes and the induction electrodes use plate electrodes of ring or mesh type. Ion winds can be effectively generated through a diverse combination of corona electrodes and induction electrodes mentioned above. However, only changing the form and structure of corona electrodes and induction electrodes has a limit in raising the speed of ion winds. This paper conducted a study on the characteristics of ion wind generation by additionally installing acceleration electrodes in addition to corona electrodes and induction electrodes to increase the speed of ion winds.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.10 no.2
• /
• pp.71-77
• /
• 1996

The end-ring may contribute a significant influence to the performance of machine. The induced currents flow through the bars of a cage rotor and complete their closed paths by passing around the end-ring. This dissertation is to describe a method for calculating end-ring resistance of squirrel cage rotor, based on 3-D finite element method(A-$\Phi$). The resistance under consideration of skin effect is calculated by using Joule's loss equation.

• International Journal of Control, Automation, and Systems
• /
• v.1 no.2
• /
• pp.215-221
• /
• 2003

The education system in this paper is used to demonstrate and educate the effects of electromagnetic induction. Placing an aluminum ring over the core and switching on AC source causes the ring to jump in the air due to induced currents in the ring producing a magnetic field opposed to that produced in the core. To control the position of the ring by only the current, it is to require nonlinear control algorithm and control board that is composed of photo sensors, decode circuit, computer communication, and power electronics circuit. This paper provides the development for education system in detail and the effects of dynamic neural networks for nonlinear control with on line is studied.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.5
• /
• pp.390-393
• /
• 1994

Details on the electrochemical formation of lead dioxide from aqueous plumbous ion are studied by measuring current-time behavior with potential step method at a rotating platinum electrode. A cubic law without induction period can be applied to the crystallization of lead dioxide in both acetate and nitrate media. In the course of the mechanistic study, the presence of a soluble intermediate during the nucleation step is clearly observed with a rotating ring-disk electrode. Decrease in the anodic ring current due to the reduction of soluble species formed during the anodic crystallization of lead dioxide at disk is detected.

• Korean Journal of Microbiology
• /
• v.38 no.4
• /
• pp.245-245
• /
• 2002

Catabolic pathways for the degradation of various aromatics by Sphingomonas yanoikuyae Bl are intertwined, joining at the level of substituted benzoates, which are further degraded vita ring cleavage reactions. The mutant strain EK497, which was constructed by deleting a large DNA region containing most of the genes for biphenyl, naphthalene, m-xylene, and m-toluate degradation, was unable to grow on all of the aromatics tested except for benzoate as the sole source of carbon and energy.S. yanoikuyae EK497 was found to possess only catechol ortho-ring cleavage activity due to deletion of the genes for the meta-cleavage pathway. Wild-type S. yanoikuyae Bl grown on benzoate has both catechol orthoand meta-cleavage activity. However, m-xylene and m-toluate, which are metabolized through methylbenzoate, and biphenyl, which is metabolized through benzoate, induce only the meta-cleavage pathway, suggesting the presence of a substrate-dependent induction mechanism.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.130-132
• /
• 1996

The squirrel cage rotors for induction motors may have several faults such as broken bars, bad spots in the end ring and abnormal skew caused by improper processing. These faults have bad effect on the performance of the induction motor. In this paper, these fault detection method is proposed, then the effects on the performance of the motor is analyzed using FEM.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.939-940
• /
• 2011

This paper deals with the design of a brushless synchronous motor with an inverter integrated rotor instead of a brush and a slip ring. It is designed for 80kW output power and compared with an induction motor and a permanent magnet synchronous motor of the same specifications. Brushless synchronous motor, induction motor and permanent magnet synchronous motor have the same amount of magnet flux density at an air gap. As a result, the brushless synchronous motor can be reduced volume of motor and power losses comparing to the induction motor.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.635-637
• /
• 2001

The faults of the squirrel cage induction motor is grew increasingly complex as the faults resulting in the shorting of a stator winding and the broken rotor bar or cracked rotor end ring, bearing faults, and so on. The users of electrical machines initially relied on simple protections such as over-current, over-voltage, earth-fault, etc. to ensure safe and reliable operation. but this method cause heavy financial losses and the threat of safety therefore it has now become very important to diagnose faults at there very inception. in this paper, we are going to discuss the detection method of broken rotor bar of squirrel cage induction motor by the motor current signal analysis(MCSA) and the opening terminal voltage signal analysis.