• Tribology and Lubricants
• /
• 제33권6호
• /
• pp.296-302
• /
• 2017

Ball milling of elemental powders in advance and using an induction heating system for intermetallic coatings are known to enhance the reactivity of combustion synthesis. In this work, the effects of simultaneously applying these two incentive methods on the properties of intermetallic coatings are studied. Ni-Al powder compacts ball-milled with three different ball-to-powder weight ratio mixtures are synthesized and coated on mild steel by combustion synthesis in an induction heating system. Consequently, similar to an electrical heating system, the positive effects of ball milling on the combustion synthesis are confirmed in the induction heating system. The enhancement in synthetic reactivity achieved by applying the two incentive methods at the same time is greater than that by applying each incentive method separately. In particular, the enhancement is remarkable at low reaction temperature. However, there are limitations to improving the reactivity by simultaneously applying the two incentive methods to the combustion synthesis, unlike the reaction temperature. The microstructure and hardness of the coating layer are both influenced by the ball-charging ratio employed in the ball-milling process.

• Tribology and Lubricants
• /
• 제34권6호
• /
• pp.284-291
• /
• 2018

Ball-milling for reactant powders in advance and using an induction heating system for Ni-Al intermetallic coating process are known to enhance the reactivity of combustion synthesis. In this work, the effects of the charging weight ratio of ball to powder in ball-milling for reactant Ni-Al powders and the synthesizing temperature in induction heating on sliding wear behavior of the coating layers are investigated. Sliding wear behavior of the coating layers is examined against a tool steel using a pin-on-disc type sliding wear machine. As results, wear of the coating layer ball-milled without ball was severely worn out at the sliding speed of 2m/s, regardless of the synthesizing temperature in induction heating. However, the wear rate of the coating layers at the sliding speed was remarkably decreased with increasing the charging weight ratio of ball in ball-milling for reactant powders. This can be explained by the fact that the void in the coating layer is disappeared and the coating layer is densified by the ball-milling. The evidence showed that pitting damages were disappeared on the worn surface of ball-milled coating layer. Consequentially, the Ni-Al intermetallic coating layer could have better wear resistance at all sliding speed ranges with the ball-milling for reactant powders in advance.

• 전기의세계
• /
• 제30권7호
• /
• pp.454-459
• /
• 1981

The aim of study in this paper is that in a system drive of the converter-inverter fed induction motor, the minimum input power can be maintained by control the voltage and frequency of the motor. In theoretical and experiment results describtion motor efficiency is improved by properly varying the ratio v/f. At lightly load condition, for example its efficiency was improved from 44% to 66% as the ratio of v/f varied from 1 to 0.57.

• Nuclear Engineering and Technology
• /
• 제53권5호
• /
• pp.1580-1586
• /
• 2021

The application of induction bending processes to industrial pipe production is increasing. The induction bending process has the effect of reducing the number of inspections and preventing leaks by reducing the weld of the pipe. For these reasons, efforts have been made to apply an induction bending process to the pipe of the PGSFR under development in Korea and this is the first attempt in the SFR design. Since the PGSFR pipe has a relatively large diameter-to-thickness ratio, it is difficult to fabricate an induction bending pipe that meets the requirements. In addition, the material properties may change because the pipe heats to a very high temperature during the induction bending process. In this study, P91 pipes were fabricated by induction bending, and the results from analyzing the induction bending process' applicability to the P91 pipe of the PGSFR are examined. The various dimensional measurements of the pipes fabricated by the induction bending process were surveyed to determine whether the requirements of the ASME Code were met. The minimum thickness, ovality, and wall buckling measured in the fabricated pipe met all the requirements. Tensile, impact, and hardness tests at various locations of the fabricated pipe also satisfied the requirements.

• 조명전기설비학회논문지
• /
• 제29권3호
• /
• pp.61-68
• /
• 2015

When medium and large induction motors are driven by 2-level inverters with low switching frequency, induction motors provoke deteriorated performances resulted from large torque ripples, flux ripples, and large current distortion. Model predictive torque control(MPTC) for a fast torque control of induction motors is also suffered from large torque ripples when the induction motors are fed by 2-level inverters that are based on 6 active voltage vectors with low switching frequency restricted. To solve this problem, this paper proposes a new MPTC method based on both a 12 active voltage vector and an optimized duty ratio calculation. The proposed control strategy illustrates its effectiveness under the various operating conditions through simulation works.

• 동의생리병리학회지
• /
• 제26권5호
• /
• pp.693-698
• /
• 2012

This study was designed to investigate the effects of 1-fluoro-2,4 dinitrobenzene (DNFB) on Induction of dermatitis in mice. We investigated the effects of DNFB on induction of dermatitis in terms of changes in body weights, ear thickness, ear weight, spleen/body ratio, histopathological observation and cytokine productions in inflammed tissue of contact dermatitis (CD) mice. In our experiments, we induced CD by using two different methods. First, mice were sensitized and challenged on the back of each ear (topical induction). Second, mice were sensitized on shaved back and challenged back of each ear (systemic induction). In our results, average weights were lowered in both topical and systemic group. But, there was no statistical significance between topical and systemic group. Treatment with DNFB enlarged ear weights and thicknesses in both topical and systemic groups. In addition, both groups were showed almost same features such as immune cell infiltration, spongiosis and hyperplasia in histopathological observations. Finally production levels of TNF-a, IFN-g and IL-6 were markedly elevated in both topical and systemic groups. On the other hand, systemic induction was more effective in spleen/body ratio and IL-6 production compared to topical induction respectively. These results suggest that dermatitis model using DNFB was used as model of CD, not for atopic dermatitis model.

• 대한약침학회지
• /
• 제25권2호
• /
• pp.71-78
• /
• 2022

Objectives: Post-term pregnancy is a condition associated with increased maternal and fetal complications. Administration of castor oil causes cervical stimulation by increasing the production of prostaglandins. We examined the effects of castor oil on cervical ripening and labor induction through a systematic review and meta-analysis. Methods: The search process was performed to obtain relevant articles from databases including Pubmed, Cochrane library, Scopus, Science direct, SID, Iran Medex, and Google Scholar using the English keywords of cervical ripening, post-term, castor oil, labor induction, Bishop score, and pregnancy considering all possible combinations without time constraints and their Persian equivalents from national databases. Results: A total of eight related articles from the 19 primary studies were extracted and systematically reviewed. According to a cumulative chart, the difference in the post-intervention Bishop score was statistically significant (standard mean difference [SMD]: 1.64, 95% confidence interval [CI]: 1.67-2.11, p = 0.001), indicating an effect of castor oil on increasing the Bishop score. In addition, the difference in labor induction was statistically significant after the intervention (odds ratio: 11.67, 95% CI: 3.34-40.81, p = 0.001), indicating an effect of castor oil on increasing the odds ratio of labor induction (experience of vaginal delivery). Conclusion: This meta-analysis showed that oral administration of castor oil is effective for cervical ripening and labor induction. Midwives should closely monitor pregnant women with prolonged labor and collaborate with obstetricians to employ castor oil as a safe intervention to induce cervical ripening and labor to prevent undue caesarean surgery.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 추계학술대회 논문집
• /
• pp.7-10
• /
• 2001

To obtain a high performance in a direct vector controlled induction machine, it is essential to correct estimation of rotor flux. The accuracy of flux observers for induction machines inherently depends on parameter sensitivity. This paper presents an analysis method for conventional flux observers using Parameter Sensitivity. The Parameter sensitivity is defined as the ratio of the percentage change in the system transfer function to the percentage change of the parameter variation. We define the ratio between real flux and estimated flux as the transfer function, and analyzed a parameter sensitivity of this transfer function.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.1176-1178
• /
• 2001

To obtain a high performance in a direct vector controlled induction machine, it is essential to correct estimation of rotor flux. The accuracy of flux observers for induction machines inherently depends on parameter sensitivity. This paper presents an analysis method for conventional flux observers using parameter Sensitivity. The Parameter sensitivity is defined as the ratio of the percentage change in the system transfer function to the percentage change of the parameter variation. We define the ratio between real flux and estimated flux as the transfer function, and analyzed a parameter sensitivity of this transfer function.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1124-1128
• /
• 2008

Thin-wall injection molding is associated with many advantages, including increased portability, the conserving of materials, and the reduction of the molding cycle times. In the application of the thin-wall molding, a considerable reduction of the effective flow thickness results in filling difficulty. High-frequency induction is an efficient way to overcome this filling difficulty by means of heating the mold surface by electromagnetic induction. The present study applies the induction heating to the injection molding of thinwalled micro structures with high aspect ratio. The feasibility of the proposed heating method is investigated through a numerical analysis. The estimated filling characteristics of the micro-features are investigated with variations of mold temperature and part thickness, of which results are also compared with experimental measurements.